1 / 76

Legra Box - Box System or Drawers by Blum

LEGRABOX u2013 the elegant box system with slim sides for metal drawers and pull-outs. Click here to know more.thttps://www.blum.com/us/en/products/boxsystems/legrabox/downloads-videos/<br>

28336
Download Presentation

Legra Box - Box System or Drawers by Blum

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. LEGRABOX Premium Metal Drawer System

  2. Experience Elegance The LEGRABOX cabinet profile is a system that combines sleek design with superior running characteristics. Even when heavily loaded and fully extended, LEGRABOX opens with ease and has minimal sag. This box system impresses with its slim sides, offering maximum storage space in drawers.

  3. Contents LEGRABOX 4 Testing Standards 5 Fascinating Technology 6 Design and Features 8 Using The Catalog 9 Drawer Assembly and Removal 10 Adjustment and Online Resources 11 Program Overview 12 N Height Drawer 16 M Height Drawer 20 K Height Drawer 24 C Height Drawer 28 F Height Drawer 32 M Height Interior Roll-out 36 K Height Interior Roll-out 40 C Height Interior Roll-out 44 Wraparound Sink Drawer 48 TIP-ON BLUMOTION 54 Assembly Aids 58 Machines 60 Accessories 64 AMBIA-LINE 66 Assembly Instructions 70 METAFILE for LEGRABOX 72 Part Number Index

  4. LEGRABOX Testing Standards Blum's Testing Standards Blum, Inc. is ISO 9001 certified which means that you are assured of consistent quality in every Blum product. All Blum runners must pass these tests without showing a measurable reduction in performance or deviation in adjustment position. Testing standards vary between products and applications. All Blum runners meet or exceed ANSI/BHMA 156.9 grade 1 requirements. Contact your local Blum representative for more details. Dynamic Wear Test Static Load Test Side Pressure Test lb lb 100,000 open/close cycles with a total load of 88 lb on LEGRABOX 750 and 155 lb on LEGRABOX 753 550 (22") drawers. 10 times for 10 seconds each time when completely extended, 66 lb is applied to the corner of the drawer front of a fully loaded drawer. 10 times for 10 seconds each time when completely extended, 44 lb is applied to the side of the drawer front of a fully loaded drawer. > General Information All Blum hardware undergoes strict quality control procedures through all stages of production. Blum hardware is designed for cabinets and cabinet components made from wood, melamine or MDF. Careful attention must be paid to installation and operating instructions when using Blum hardware (see catalogs and instruction sheets for all technical information). The manufacturer must decide on the screws or attachment methods to suit the material being used (i.e. wood, melamine, etc.). The hardware must not be exposed to acidic or corrosive materials (i.e. some household cleaning solutions). To ensure that Blum hardware functions correctly, it must be kept clean and undamaged. For any addition- al information please contact your Blum representative. Anyone selling Blum hardware must ensure that their customer is aware of any relevant information given in this catalog. Care and cleaning ‒ use a clean damp cloth. Conditions of Sale and Delivery All deliveries and services are based on the “general conditions of sale” which are available upon request. The technical presentations and dimensions in illustrations are non-binding. We reserve the right to make changes to specifications at any time. We do not accept any responsi- bility for any errors which may occur in the production of this catalog. 4 © 2019 Blum, Inc. Subject to technical modifications without notice

  5. Fascinating Technology The technology behind LEGRABOX makes this runner system even easier to open. The motion technology designed into the drawer profile and roller carriage creates a fluid running action in this unrivaled drawer, even under heavy loads. Stability for Tall Fronts A new front fixing bracket guarantees maximum stability when opening and closing of tall drawer fronts. Heavy Load Capacity The cabinet profile has increased stability along the length of the runner. Even wide, heavy drawers experience a smooth running action, thanks to a high dynamic carrying capacity of 88 and 155 lbs.

  6. LEGRABOX Design Refined, Luxurious Finishes LEGRABOX in matte Orion gray or brushed stainless steel complement a wide range of colors and materials. Ordering Codes Choose Orion gray (OG-M) or brushed stainless steel (INGL) while using the order form. Sleek Design Impressively slim 1/2" drawer sides, which are straight on both the inside and out, provide a sleek look while maximizing usable interior drawer space. Versatility The versatile LEGRABOX program allows for a wide range of design options for any kitchen, bath or cabinet application. LEGRABOX combines design and function for well-balanced solutions creating elegance in motion. 6 © 2019 Blum, Inc. Subject to technical modifications without notice

  7. LEGRABOX Features BLUMOTION BLUMOTION adapts to different weights and closing forces to give a smooth and silent close every time. Whether it is a small top drawer or a wide deep drawer, BLUMOTION guarantees the soft close you have come to expect from Blum. TIP-ON BLUMOTION With TIP-ON BLUMOTION for LEGRABOX, we have combined the mechanical opening of TIP- ON, LEGRABOX's smooth running action, and the reliable soft close of BLUMOTION. page 48 SERVO-DRIVE SERVO-DRIVE enables drawers to open automatically with just a touch of the drawer front or with a light pull of the handle. This unique feature is based on an electrical drive unit that, once activated, opens the drawer for you. AMBIA-LINE Stylish and functional, AMBIA-LINE drawer organization system creates a clean, harmonious look to the interior of your drawer. Stored items are always organized, easy to find and readily accessible. Other organizational options also include our kitchen accessories. page 64 7 Dimensions in millimeters (inch equivalents as noted) © 2019 Blum, Inc.

  8. LEGRABOX Using the Catalog Required Parts Contains all necessary components with part numbers listed to order the drawer Application Page Provides details of the application and an overview of the parts that make up the drawer p p LEGRABOX N Height Drawer LEGRABOX Required Parts Application Features ▀ Full extension drawer system with BLUMOTION ▀ Two-dimensional drawer front adjustment ▀ Drawer profile height 66.5 (2-5/8") and SERVO-DRIVE Space Requirements Cabinet and drawer profile sets Sets include: ▀ Drawer profiles include color coordinated cover cap 1 Cabinet profile 2 Drawer profile ▀ Left and right profile ▀ Smooth running action ▀ Dynamic load capacity of 88 lb ▀ Compatible with TIP-ON BLUMOTION* AL + 3 AL = Actual cabinet profile length *Minimum opening height based on 3 (1/8") clearance Components Actual cabinet profile length Nominal length 88 lb Orion gray Stainless steel 4 750.4501S 750.5001S 750.5501S 707N 661.1300.HG 770N4502S 770N5002S 770N5502S 612TH 770N4502I 770N5002I 770N5502I 612TH 18" 450 (17-11/16") 500 (19-11/16") 550 (21-5/8") 20" 22" Installation wood screw Installation system screw Rear fixing bracket set Front fixing bracket ▀ Two required per drawer Set includes: ▀ Orion gray (OG-M) 4 3 ▀ Left and right bracket 3 EXPANDO 2 1 Part no. ZF7N70E2 ZF7N7002 EXPANDO Part no. Screw-on* ZB7N000S 612TH Rear fixing bracket set *Use of #6 x 5/8" wood screw is recommended Installation screw NOTE: Parts identified on right page page 50 *TIP-ON BLUMOTION: Enables drawers to be opened with a light touch to the front and retain BLUMOTION soft closing action 13 12 Dimensions in millimeters (inch equivalents as noted) © 2019 Blum, Inc. © 2019 Blum, Inc. Subject to technical modifications without notice Installation Dimensions Cabinet profile installation and cutting dimensions for the bottom and back of the drawer Specifications Front and rear fixing bracket installation specifications LEGRABOX N Height Drawer LEGRABOX Specifications Cabinet profile installation Front fixing bracket installation 20.5 Ø10 x 12* 450-500 750 88 lb 42 min. 550 16 9 32 80 min. 224 37 45.5 min. 256 + overlay 38 min. 320 23.4 14 + overlay NOTE: The orange dots indicate fixing screw locations required to meet specified load ratings *Pre-boring dimensions for EXPANDO only, for screw-on pre-bore Ø2 x 2.5 Cutting dimensions for bottom and back Rear fixing bracket installation Bottom boring distance Drawer bottom Width = Inside cabinet width minus 35 (1-3/8") Length = Actual cabinet profile length minus 10 (13/32") Drawer back Width = Inside cabinet width minus 38 (1-1/2") Height = 39 (1-17/32") 39 ICW - 38 128 AL - 10 Ø 2.5 x 2 24 ICW 48.5 ICW - 35 AL = Actual cabinet profile length ICW = Inside cabinet width 38 NOTE: Use 16 (5/8") material for bottom and back Pre-bore dimension Ø 2.5 x 2 Assembly Aids page 54 Accessories page 60 Index page 72 14 15 © 2019 Blum, Inc. Subject to technical modifications without notice Dimensions in millimeters (inch equivalents as noted) © 2019 Blum, Inc. 8 © 2019 Blum, Inc. Subject to technical modifications without notice

  9. LEGRABOX Drawer Assembly and Removal Step 1 Measure inside cabinet width (ICW) Use 16 (5/8") material for drawer bottom and back Use inside cabinet width (ICW) to calculate the drawer bottom and back dimensions. Formulas are found on the specification page of each application. M Height example: Drawer bottom: Width = ICW minus 35 (1-3/8") Length = Actual cabinet profile length minus 10 (13/32") Drawer back: Width = ICW minus 38 (1-1/2") Height = 63 (2-15/32") For best assembly results, use BOXFIX E-L. ICW A B NOTE: Minimum inside cabinet width without TIP-ON BLUMOTION = 148 (5-13/16") Step 2 Attach drawer back Rear fixing brackets are attached with #6 x 1/2" truss head screws (612TH). The drawer back, with rear fixing brackets attached, snaps into the rear of both drawer profiles. Step 3 Drawer bottom installation The drawer bottom slides into the drawer profiles. Push the drawer bottom flush with the front of the drawer. Pre-bore and attach with wood screws (612TH). Step 4 Attach drawer front Follow the installation drawing for locating hole positions for front fixing brackets and pre-bore the necessary EXPANDO Ø10 x 12 holes (screw-on versions also available). Insert front fixing bracket into pre-bored holes and screw as shown to secure. Snap drawer front onto drawer. Step 5 Drawer box installation Place drawer box onto cabinet profiles and insert drawer box into cabinet. Drawer Removal Drawer box removal Pull drawer forward to reveal locking devices. Squeeze triggers on locking device and lift drawer box off of runners. 9 Dimensions in millimeters (inch equivalents as noted) © 2019 Blum, Inc.

  10. LEGRABOX Adjustment One of the many benefits of the LEGRABOX system is the fully integrated, three-dimensional adjustment mechanism. Height and side adjustments can be made easily on the inside of the drawer profile, beneath the cover cap, and the tilt adjustment is located at the rear of the profile. Additionally, all adjustments are made using a T20 TORX driver (see page 62). Height Adjustment Tilt Adjustment Side Adjustment Front Removal > Online Resource for Planning Easy Planning Blum offers many online tools to help you with your kitchen planning and ordering. Online Product Configurator (OPC) offers a parts list and planning information based on your specifications. Once complete, your results can then be exported to a shareable document. OPC is easily accessible on our website at blum.com/configurator 10 © 2019 Blum, Inc. Subject to technical modifications without notice

  11. LEGRABOX LEGRABOX Program Overview M Height N Height Pages 12 - 15 Pages 16 - 19 K Height C Height Pages 24 - 27 Pages 20 - 23 M Height Interior Roll-out F Height Pages 32 - 35 Pages 28 - 31 C Height Interior Roll-out K Height Interior Roll-out Pages 36 - 39 Pages 40 - 43 Wraparound Sink Drawer Pages 44 - 47 11 Dimensions in millimeters (inch equivalents as noted) © 2019 Blum, Inc.

  12. LEGRABOX N Height Drawer Application Features Space Requirements ▬ Full extension drawer system with BLUMOTION ▬ Smooth running action ▬ Two-dimensional drawer front adjustment ▬ Dynamic load capacity of 88 lb ▬ Drawer profile height 66.5 (2-5/8") ▬ Compatible with TIP-ON BLUMOTION* and SERVO-DRIVE AL + 3 AL = Actual cabinet profile length *Minimum opening height based on 3 (1/8") clearance Components 4 3 2 1 NOTE: Parts identified on right page page 49 *TIP-ON BLUMOTION: Enables drawers to be opened with a light touch to the front and retain BLUMOTION soft closing action 12 © 2019 Blum, Inc. Subject to technical modifications without notice

  13. LEGRABOX Required Parts Cabinet and drawer profile sets Sets include: 1 Cabinet profile 2 Drawer profile ▬ Left and right profile ▬ Drawer profiles include color coordinated cover cap Actual cabinet profile length Nominal length 88 lb Orion gray Stainless steel 750.4501S 750.5001S 750.5501S 707N 661.1300.HG 770N4502S 770N5002S 770N5502S 612TH 770N4502I 770N5002I 770N5502I 612TH 18" 450 (17-11/16") 500 (19-11/16") 550 (21-5/8") 20" 22" Installation wood screw Installation system screw Rear fixing bracket set Front fixing bracket Set includes: ▬ Left and right bracket ▬ Orion gray (OG-M) ▬ Two required per drawer 4 3 EXPANDO Part no. ZF7N70E2 ZF7N7002 EXPANDO Part no. Screw-on* ZB7N000S Rear fixing bracket set *Use of #6 x 5/8" wood screw is recommended 612TH Installation screw 13 Dimensions in millimeters (inch equivalents as noted) © 2019 Blum, Inc.

  14. LEGRABOX N Height Drawer Cabinet profile installation 450-500 750 88 lb 550 9 32 224 37 256 320 NOTE: The orange dots indicate fixing screw locations required to meet specified load ratings Cutting dimensions for bottom and back Drawer bottom Width = Inside cabinet width minus 35 (1-3/8") Length = Actual cabinet profile length minus 10 (13/32") Drawer back Width = Inside cabinet width minus 38 (1-1/2") Height = 39 (1-17/32") 39 ICW - 38 AL - 10 ICW ICW - 35 AL = Actual cabinet profile length ICW = Inside cabinet width 38 NOTE: Use 16 (5/8") material for bottom and back Assembly Aids page 54 Accessories page 60 Index page 72 14 © 2019 Blum, Inc. Subject to technical modifications without notice

  15. LEGRABOX Specifications Front fixing bracket installation 20.5 Ø10 x 12* 42 min. 16 80 min. 45.5 min. + overlay 38 min. 23.4 14 + overlay NOTE: For full drawer assembly see page 9 *Pre-boring dimensions for EXPANDO only, for screw-on pre-bore Ø2 x 2.5 Rear fixing bracket installation Bottom boring distance 128 Ø 2.5 x 2 24 48.5 Pre-bore dimension Ø 2.5 x 2 15 Dimensions in millimeters (inch equivalents as noted) © 2019 Blum, Inc.

  16. LEGRABOX M Height Drawer Application Features ▬ Full extension drawer system with BLUMOTION ▬ Smooth running action ▬ Three-dimensional drawer front adjust- ment ▬ Dynamic load capacity of 88 lb and 155 lb ▬ Drawer profile height 90.5 (3-9/16") ▬ Compatible with TIP-ON BLUMOTION* and SERVO-DRIVE Space Requirements AL + 3 AL = Actual cabinet profile length *Minimum opening height based on 3 (1/8") clearance Components 4 2 3 1 NOTE: Parts identified on right page page 50 *TIP-ON BLUMOTION: Enables drawers to be opened with a light touch to the front and retain BLUMOTION soft closing action 16 © 2019 Blum, Inc. Subject to technical modifications without notice

  17. LEGRABOX Required Parts Cabinet and drawer profile sets Sets include: 1 Cabinet profile 2 Drawer profile ▬ Left and right profile ▬ Drawer profiles include color coordinated cover cap Actual cabinet profile length Nominal length 88 lb 155 lb Orion gray Stainless steel 750.2701S 750.3501S 750.4001S 750.4501S 750.5001S 750.5501S 770M2702S 770M3502S 770M4002S 770M4502S 770M5002S 770M5502S 770M6002S 770M2702I 770M3502I 770M4002I 770M4502I 770M5002I 770M5502I 770M6002I 11" 270 (10-5/8") 350 (13-3/4") 400 (15-3/4") 450 (17-11/16") 500 (19-11/16") 550 (21-5/8") 600 (23-5/8") 14" 16" 753.4501S 753.5001S 753.5501S 753.6001S 18" 20" 22" 24" 753.6501S 770M6502S 770M6502I 26" 650 (25-9/16") 707N 707N 612TH 612TH Installation wood screw 661.1300.HG 661.1300.HG Installation system screw Front fixing bracket Rear fixing bracket set ▬ Two required per drawer Set includes: ▬ Left and right bracket ▬ Orion gray (OG-M) 3 4 EXPANDO Part no. ZF7M70E2 ZF7M7002 EXPANDO Screw-on* Part no. ZB7M000S 612TH Rear fixing bracket set *Use of #6 x 5/8" wood screw is recommended Installation screw 17 Dimensions in millimeters (inch equivalents as noted) © 2019 Blum, Inc.

  18. LEGRABOX M Height Drawer Cabinet profile installation 270 350 750 88 lb 400-500 550 32 9 37 160 192 224 256 320 450 753 155 lb 500-600 650 9 32 224 37 256 320 416 NOTE: The orange dots indicate fixing screw locations required to meet specified load ratings Cutting dimensions for bottom and back Drawer bottom Width = Inside cabinet width minus 35 (1-3/8") Length = Actual cabinet profile length minus 10 (13/32") Drawer back Width = Inside cabinet width minus 38 (1-1/2") Height = 63 (2-15/32") 63 ICW - 38 AL - 10 ICW ICW - 35 AL = Actual cabinet profile length ICW = Inside cabinet width 38 NOTE: Use 16 (5/8") material for bottom and back Assembly Aids page 54 Accessories page 60 Index page 72 18 © 2019 Blum, Inc. Subject to technical modifications without notice

  19. LEGRABOX Specifications Front fixing bracket installation 20.5 Ø10 x 12* 68 min.** 32 106 min. + overlay 51 min. 38 min. 23.4 14 + overlay NOTE: For full drawer assembly see page 9 *Pre-boring dimensions for EXPANDO only, for screw-on pre-bore Ø2 x 2.5 **Includes 2 tilt adjustment Rear fixing bracket installation Bottom boring distance 128 Ø 2.5 x 2 24 48.5 Pre-bore dimension Ø 2.5 x 2 19 Dimensions in millimeters (inch equivalents as noted) © 2019 Blum, Inc.

  20. LEGRABOX K Height Drawer Application Features ▬ Full extension drawer system with BLUMOTION ▬ Smooth running action ▬ Three-dimensional drawer front adjustment ▬ Dynamic load capacity of 88 lb and 155 lb ▬ Drawer profile height 128.5 (5-1/16") ▬ Compatible with TIP-ON BLUMOTION* and SERVO-DRIVE Space Requirements AL + 3 AL = Actual cabinet profile length *Minimum opening height based on 3 (1/8") clearance Components 4 2 1 3 NOTE: Parts identified on right page page 50 *TIP-ON BLUMOTION: Enables drawers to be opened with a light touch to the front and retain BLUMOTION soft closing action 20 © 2019 Blum, Inc. Subject to technical modifications without notice

  21. LEGRABOX Required Parts Cabinet and drawer profile sets Sets include: 1 Cabinet profile 2 Drawer profile ▬ Left and right profile ▬ Drawer profiles include color coordinated cover cap Actual cabinet profile length Nominal length 88 lb 155 lb Orion gray Stainless steel 750.3501S 750.4001S 750.4501S 750.5001S 770K3502S 770K4002S 770K4502S 770K5002S 770K3502I 770K4002I 770K4502I 770K5002I 14" 350 (13-3/4") 400 (15-3/4") 450 (17-11/16") 500 (19-11/16") 16" 753.4501S 753.5001S 18" 20" 750.5501S 753.5501S 770K5502S 770K5502I 22" 550 (21-5/8") 707N 707N 612TH 612TH Installation wood screw 661.1300.HG 661.1300.HG Installation system screw Front fixing bracket Rear fixing bracket set ▬ Two required per drawer Set includes: ▬ Left and right bracket ▬ Orion gray (OG-M) 3 4 EXPANDO Part no. ZF7K70E2 ZF7K7002 EXPANDO Part no. Screw-on* ZB7K000S 612TH Rear fixing bracket set *Use of #6 x 5/8" wood screw is recommended Installation screw 21 Dimensions in millimeters (inch equivalents as noted) © 2019 Blum, Inc.

  22. LEGRABOX K Height Drawer Cabinet profile installation 350 750 88 lb 400-500 550 32 9 37 192 224 256 320 450 753 155 lb 500-550 9 32 224 37 256 320 NOTE: The orange dots indicate fixing screw locations required to meet specified load ratings Cutting dimensions for bottom and back Drawer bottom Width = Inside cabinet width minus 35 (1-3/8") Length = Actual cabinet profile length minus 10 (13/32") Drawer back Width = Inside cabinet width minus 38 (1-1/2") Height = 101 (3-31/32") 101 ICW - 38 AL - 10 ICW ICW - 35 AL = Actual cabinet profile length ICW = Inside cabinet width 38 NOTE: Use 16 (5/8") material for bottom and back Assembly Aids page 54 Accessories page 60 Index page 72 22 © 2019 Blum, Inc. Subject to technical modifications without notice

  23. LEGRABOX Specifications Front fixing bracket installation Ø10 x 12* 106 min.** 144 min. 32 + overlay 38 min. 51 min. 23.4 14 + overlay NOTE: For full drawer assembly see page 9 *Pre-boring dimensions for EXPANDO only, for screw-on pre-bore Ø2 x 2.5 **Includes 2 tilt adjustment Rear fixing bracket installation Bottom boring distance 9 32 128 Ø 2.5 x 2 32 24 19 48.5 Pre-bore dimension Ø2.5 x 2 23 Dimensions in millimeters (inch equivalents as noted) © 2019 Blum, Inc.

  24. LEGRABOX C Height Drawer Application Features ▬ Full extension drawer system with BLUMOTION ▬ Smooth running action ▬ Three-dimensional drawer front adjustment ▬ Dynamic load capacity of 88 lb and 155 lb ▬ Drawer profile height 177 (7") ▬ Compatible with TIP-ON BLUMOTION* and SERVO-DRIVE Space Requirements AL + 3 AL = Actual cabinet profile length *Minimum opening height based on 3 (1/8") clearance Components 4 2 3a 3b 1 NOTE: Parts identified on right page page 50 *TIP-ON BLUMOTION: Enables drawers to be opened with a light touch to the front and retain BLUMOTION soft closing action 24 © 2019 Blum, Inc. Subject to technical modifications without notice

  25. LEGRABOX Required Parts Cabinet and drawer profile sets Sets include: ▬ Left and right profile ▬ Drawer profiles include color coordinated cover cap 1 Cabinet profile 2 Drawer profile Actual cabinet profile length Nominal length 88 lb 750.2701S 750.3501S 750.4001S 750.4501S 750.5001S 750.5501S 155 lb Orion gray 770C2702S 770C3502S 770C4002S 770C4502S 770C5002S 770C5502S 770C6002S 770C6502S Stainless steel 770C2702I 770C3502I 770C4002I 770C4502I 770C5002I 770C5502I 770C6002I 770C6502I 11" 270 (10-5/8") 350 (13-3/4") 400 (15-3/4") 450 (17-11/16") 500 (19-11/16") 550 (21-5/8") 600 (23-5/8") 650 (25-9/16") 14" 16" 753.4501S 753.5001S 753.5501S 753.6001S 753.6501S 707N 661.1300.HG 18" 20" 22" 24" 26" 707N 612TH 612TH Installation wood screw 661.1300.HG Installation system screw Front fixing bracket options Rear fixing bracket set EXPANDO ▬ Two C brackets required per drawer Set includes: ▬ Left and right bracket ▬ Orion gray (OG-M) 4 3a Part no. ZF7C70E2 ZF7C7002 EXPANDO Screw-on* ▬ Four M brackets required per drawer 3b Part no. Part no. ZF7M70E2 ZF7M7002 EXPANDO ZB7C000S 612TH Screw-on* Rear fixing bracket set *Use of #6 x 5/8" wood screw recommended Installation screw 25 Dimensions in millimeters (inch equivalents as noted) © 2019 Blum, Inc.

  26. LEGRABOX C Height Drawer Cabinet profile installation 270 350 750 88 lb 400-500 550 32 9 37 160 192 224 256 320 450 753 155 lb 500-600 650 9 32 224 37 256 320 416 NOTE: The orange dots indicate fixing screw locations required to meet specified load ratings Cutting dimensions for bottom and back Drawer bottom Width = Inside cabinet width minus 35 (1-3/8") Length = Actual cabinet profile length minus 10 (13/32") Drawer back Width = Inside cabinet width minus 38 (1-1/2") Height = 148 (5-13/16") 148 ICW - 38 AL - 10 ICW ICW - 35 AL = Actual cabinet profile length ICW = Inside cabinet width 38 NOTE: Use 16 (5/8") material for bottom and back Assembly Aids page 54 Accessories page 60 Index page 72 26 © 2019 Blum, Inc. Subject to technical modifications without notice

  27. LEGRABOX Specifications Front fixing bracket installation 20.5 Ø10 x 12* 32 155 min. 96 193 min. 32 + overlay 51 min. 38 min. 24.4 14 + overlay NOTE: For full drawer assembly see page 9 *Pre-boring dimensions for EXPANDO only, for screw-on pre-bore Ø2 x 2.5 **Includes 2 tilt adjustment ***For use with two M brackets Rear fixing bracket installation Bottom boring distance 128 Ø 2.5 x 2 24 48.5 Pre-bore dimension Ø2.5 x 2 27 Dimensions in millimeters (inch equivalents as noted) © 2019 Blum, Inc.

  28. LEGRABOX F Height Drawer Application Features ▬ Full extension drawer system with BLUMOTION ▬ Smooth running action ▬ Three-dimensional drawer front adjustment ▬ Dynamic load capacity of 88 lb and 155 lb ▬ Drawer profile height 241 (9-1/2") ▬ Compatible with TIP-ON BLUMOTION* and SERVO-DRIVE Space Requirements AL + 3 AL = Actual cabinet profile length *Minimum opening height based on 3 (1/8") clearance Components 4 2 3a 3b 1 NOTE: Parts identified on right page page 50 *TIP-ON BLUMOTION: Enables drawers to be opened with a light touch to the front and retain BLUMOTION soft closing action 28 © 2019 Blum, Inc. Subject to technical modifications without notice

  29. LEGRABOX Required Parts Cabinet and drawer profile sets Sets include: ▬ Left and right profile ▬ Drawer profiles include color coordinated cover cap 1 Cabinet profile 2 Drawer profile Actual cabinet profile length Nominal length 88 lb 155 lb Orion gray Stainless steel 750.4001S 750.4501S 750.5001S 750.5501S 770F4002S 770F4502S 770F5002S 770F5502S 770F6502S 612TH 770F4002I 770F4502I 770F5002I 770F5502I 770F6502I 612TH 16" 400 (15-3/4") 450 (17-11/16") 500 (19-11/16") 550 (21-5/8") 650 (25-9/16") 753.4501S 753.5001S 753.5501S 753.6501S 707N 661.1300.HG 18" 20" 22" 26" 707N Installation wood screw 661.1300.HG Installation system screw Front fixing bracket options Rear fixing bracket set EXPANDO Set includes: ▬ Left and right bracket ▬ Orion gray (OG-M) ▬ Two M brackets required per drawer ▬ Two C brackets required per drawer 4 3a Part no. ZF7M70E2 ZF7M7002 ZF7C70E2 ZF7C7002 EXPANDO Screw-on* EXPANDO Screw-on* ▬ Six M brackets required per drawer 3b Part no. ZF7M70E2 ZF7M7002 EXPANDO Part no. Screw-on* *Use of #6 x 5/8" wood screw recommended ZB7F000S 612TH Rear fixing bracket set NOTE: Top bracket ZFM70E2 provides lateral stability Installation screw 29 Dimensions in millimeters (inch equivalents as noted) © 2019 Blum, Inc.

  30. LEGRABOX F Height Drawer Cabinet profile installation 750 88 lb 400-500 550 32 9 37 224 256 320 450 753 155 lb 500-550 650 9 32 224 37 256 320 416 NOTE: The orange dots indicate fixing screw locations required to meet specified load ratings Cutting dimensions for bottom and back Drawer bottom Width = Inside cabinet width minus 35 (1-3/8") Length = Actual cabinet profile length minus 10 (13/32") Drawer back Width = Inside cabinet width minus 38 (1-1/2") Height = 212 (8-11/32") 212 ICW - 38 AL - 10 ICW ICW - 35 AL = Actual cabinet profile length ICW = Inside cabinet width 38 NOTE: Use 16 (5/8") material for bottom and back Assembly Aids page 54 Accessories page 60 Index page 72 30 © 2019 Blum, Inc. Subject to technical modifications without notice

  31. LEGRABOX Specifications Front fixing bracket installation 20.5 Ø10 x 12* 32 32 32*** 219 min.** 257 min. 96 32 + overlay 38 min. 51 min. 24.4 14 + overlay NOTE: For full drawer assembly see page 9 *Pre-boring dimensions for EXPANDO only, for screw-on pre-bore Ø2 x 2.5 **Includes 2 tilt adjustment ***For use with three M brackets Rear fixing bracket installation Bottom boring distance 128 Ø 2.5 x 2 24 48.5 Pre-bore dimension Ø2.5 x 2 31 Dimensions in millimeters (inch equivalents as noted) © 2019 Blum, Inc.

  32. LEGRABOX M Height Interior Roll-out Application Features ▬ Full extension drawer system with BLUMOTION ▬ Smooth running action ▬ Three-dimensional drawer front adjustment ▬ Dynamic load capacity of 88 lb and 155 lb ▬ Drawer profile height 90.5 (3-9/16") ▬ Compatible with TIP-ON BLUMOTION* and SERVO-DRIVE Space Requirements AL + 3 AL = Actual cabinet profile length Components 4 2 3 1 5 NOTE: Parts identified on right page page 50 *TIP-ON BLUMOTION: Enables drawers to be opened with a light touch to the front and retain BLUMOTION soft closing action 32 © 2018 Blum, Inc. Subject to technical modifications without notice

  33. LEGRABOX Required Parts Cabinet and drawer profile sets Sets include: ▬ Left and right profile ▬ Drawer profiles include color coordinated cover cap 1 Cabinet profile 2 Drawer profile Actual cabinet profile length Nominal length 88 lb 155 lb Orion gray Stainless steel 750.2701S 750.3501S 750.4001S 750.4501S 750.5001S 750.5501S 770M2702S 770M3502S 770M4002S 770M4502S 770M5002S 770M5502S 770M6002S 770M6502S 612TH 770M2702I 770M3502I 770M4002I 770M4502I 770M5002I 770M5502I 770M6002I 770M6502I 612TH 11" 270 (10-5/8") 350 (13-3/4") 400 (15-3/4") 450 (17-11/16") 500 (19-11/16") 550 (21-5/8") 600 (23-5/8") 650 (25-9/16") 14" 16" 753.4501S 753.5001S 753.5501S 753.6001S 753.6501S 707N 661.1300.HG 18" 20" 22" 24" 26" 707N Installation wood screw 661.1300.HG Installation system screw Front piece Rear fixing bracket set ▬ Length 1043 (41-1/16") ▬ Cut to size ▬ Maximum inside cabinet width = 1168 (46") Set includes: ▬ Left and right bracket ▬ Orion gray (OG-M) 3 4 NOTE: Choose Orion gray (OG-M) or brushed nickel (ELN2) on order form Part no. Part no. ZB7M000S 612TH Rear fixing bracket set ZV7.1043C01 Front piece Installation screw Interior front fixing bracket set Set includes: ▬ Left and right front fixing bracket ▬ Left and right outer cover cap ▬ Locking piece (Z31A0008) ▬ Screws 5 Part no. ZI7.0MS0 ZI7.0MI0 Orion gray (OG-M) Stainless steel (INGL) NOTE: M Height interior front assembly instructions on page 66 33 Dimensions in millimeters (inch equivalents as noted) © 2019 Blum, Inc.

  34. LEGRABOX M Height Interior Roll-out Cabinet profile installation 270 350 750 88 lb 400-500 550 32 9 37 160 192 224 256 320 450 753 155 lb 500-600 650 9 32 224 37 256 320 416 NOTE: The orange dots indicate fixing screw locations required to meet specified load ratings Cutting dimensions for bottom and back Drawer bottom Width = Inside cabinet width minus 35 (1-3/8") Length = Actual cabinet profile length minus 10 (13/32") Drawer back Width = Inside cabinet width minus 38 (1-1/2") Height = 63 (2-15/32") 63 ICW - 38 AL - 10 ICW ICW - 35 AL = Actual cabinet profile length ICW = Inside cabinet width 38 NOTE: Use 16 (5/8") material for bottom and back Assembly Aids page 54 Accessories page 60 Index page 72 34 © 2019 Blum, Inc. Subject to technical modifications without notice

  35. LEGRABOX Specifications Front fixing bracket installation 20.5 9 66 min.* 32 104 min. 19 38 min. 23.4 NOTE: For full drawer assembly see page 9 and 66 *Include 2 tilt adjustment Cutting front piece Bottom boring distance Using a metal cutting blade, cut front piece to size. X = Inside cabinet width minus 126 (5") 128 Ø 2.5 x 2 24 48.5 Pre-bore dimension Ø2.5 x 2 35 Dimensions in millimeters (inch equivalents as noted) © 2019 Blum, Inc.

  36. LEGRABOX K Height Interior Roll-out Application Features ▬ Full extension drawer system with BLUMOTION ▬ Smooth running action ▬ Three-dimensional drawer front adjustment ▬ Dynamic load capacity of 88 lb and 155 lb ▬ Drawer profile height 128.5 (5-1/16") ▬ Compatible with TIP-ON BLUMOTION* and SERVO-DRIVE Space Requirements AL = Actual cabinet profile length Components 4 2 3 1 5 NOTE: Parts identified on right page page 50 *TIP-ON BLUMOTION: Enables drawers to be opened with a light touch to the front and retain BLUMOTION soft closing action 36 © 2019 Blum, Inc. Subject to technical modifications without notice

  37. LEGRABOX Required Parts Cabinet and drawer profile sets Sets include: ▬ Left and right profile ▬ Drawer profiles include color coordinated cover cap 1 Cabinet profile 2 Drawer profile Actual cabinet profile length Nominal length 88 lb 155 lb Orion gray Stainless steel 750.3501S 750.4001S 750.4501S 750.5001S 750.5501S 770K3502S 770K4002S 770K4502S 770K5002S 770K5502S 612TH 770K3502I 770K4002I 770K4502I 770K5002I 770K5502I 612TH 14" 350 (13-3/4") 400 (15-3/4") 450 (17-11/16") 500 (19-11/16") 550 (21-5/8") 16" 753.4501S 753.5001S 753.5501S 707N 661.1300.HG 18" 20" 22" 707N Installation wood screw 661.1300.HG Installation system screw Front piece Rear fixing bracket set ▬ Length 1043 (41-1/16") ▬ Cut to size ▬ Maximum inside cabinet width = 1168 (46") Set includes: ▬ Left and right bracket ▬ Orion gray (OG-M) 3 4 NOTE: Choose Orion gray (OG-M) or brushed nickel (ELN2) on order form Part no. ZB7K000S 612TH Rear fixing bracket set Part no. Installation screw ZV7.1043C01 Front piece Interior front fixing bracket set Set includes: ▬ Left and right front fixing bracket ▬ Left and right outer cover cap ▬ Locking piece (Z31A0008) ▬ Screws 5 Part no. ZI7.0KS0 ZI7.0KI0 Orion gray (OG-M) Stainless steel (INGL) NOTE: K Height interior front assembly instructions on page 66 37 Dimensions in millimeters (inch equivalents as noted) © 2019 Blum, Inc.

  38. LEGRABOX K Height Interior Roll-out Cabinet profile installation 350 750 88 lb 400-500 550 32 9 37 192 224 256 320 450 753 155 lb 500-550 9 32 224 37 256 320 NOTE: The orange dots indicate fixing screw locations required to meet specified load ratings Cutting dimensions for bottom and back Drawer bottom Width = Inside cabinet width minus 35 (1-3/8") Length = Actual cabinet profile length minus 10 (13/32") Drawer back Width = Inside cabinet width minus 38 (1-1/2") Height = 101 (3-31/32") 101 ICW - 38 AL - 10 ICW ICW - 35 AL = Actual cabinet profile length ICW = Inside cabinet width 38 NOTE: Use 16 (5/8") material for bottom and back Assembly Aids page 54 Accessories page 60 Index page 72 38 © 2019 Blum, Inc. Subject to technical modifications without notice

  39. LEGRABOX Specifications Front fixing bracket installation Ø10 x 12* 106 min.** 144 min. 32 + overlay 38 min. 51 min. 23.4 14 + overlay NOTE: For full drawer assembly see page 9 and 66 *Include 2 tilt adjustment Cutting front piece Bottom boring distance Using a metal cutting blade, cut front piece to size. X = Inside cabinet width minus 126 (5") 128 Ø 2.5 x 2 24 48.5 Pre-bore dimension Ø2.5 x 2 39 Dimensions in millimeters (inch equivalents as noted) © 2019 Blum, Inc.

  40. LEGRABOX C Height Interior Roll-out Application Features ▬ Full extension drawer system with BLUMOTION ▬ Smooth running action ▬ Three-dimensional drawer front adjustment ▬ Dynamic load capacity of 88 lb and 155 lb ▬ Drawer profile height 177 (7") ▬ Compatible with TIP-ON BLUMOTION* and SERVO-DRIVE Space Requirements AL + 3 AL = Actual cabinet profile length Components 6 2 4 3 1 5 NOTE: Parts identified on right page page 50 *TIP-ON BLUMOTION: Enables drawers to be opened with a light touch to the front and retain BLUMOTION soft closing action 40 © 2019 Blum, Inc. Subject to technical modifications without notice

  41. LEGRABOX Required Parts Cabinet and drawer profile sets Sets include: ▬ Left and right profile ▬ Drawer profiles include color coordinated cover cap 1 Cabinet profile 2 Drawer profile Actual cabinet profile length Nominal length 88 lb 155 lb Orion gray Stainless steel 750.2701S 750.3501S 750.4001S 750.4501S 750.5001S 750.5501S 770C2702S 770C3502S 770C4002S 770C4502S 770C5002S 770C5502S 770C6002S 770C6502S 612TH 770C2702I 770C3502I 770C4002I 770C4502I 770C5002I 770C5502I 770C6002I 770C6502I 612TH 11" 270 (10-5/8") 350 (13-3/4") 400 (15-3/4") 450 (17-11/16") 500 (19-11/16") 550 (21-5/8") 600 (23-5/8") 650 (25-9/16") 14" 16" 753.4501S 753.5001S 753.5501S 753.6001S 753.6501S 707N 661.1300.HG 18" 20" 22" 24" 26" 707N Installation wood screw 661.1300.HG Installation system screw Front piece Cross gallery rail ▬ Length 1043 (41-1/16") ▬ Cut to size ▬ Maximum inside cabinet width = 1168 (46") ▬ Length 1080 (42-1/2") ▬ Cut to size 3 4 NOTE: Choose Orion gray (OG-M) or brushed nickel (ELN2) on order form NOTE: Choose Orion gray (OG-M) or brushed nickel (ELN2) on order form Part no. Part no. ZV7.1043C01 Front piece ZR7.1080U Cross rail Interior front fixing bracket set Rear fixing bracket set Set includes: ▬ Left and right front fixing bracket ▬ Left and right outer cover cap ▬ Left and right inside cover cap ▬ Locking piece (Z31A0008) ▬ Screws Set includes: ▬ Left and right bracket ▬ Orion gray (OG-M) 5 6 Part no. Part no. ZI7.3CS0 ZI7.3CI0 Orion gray (OG-M) ZB7C000S 612TH Rear fixing bracket set Stainless steel (INGL) Installation screw NOTE: C Height interior front assembly instructions on page 67 41 Dimensions in millimeters (inch equivalents as noted) © 2019 Blum, Inc.

  42. LEGRABOX C Height Interior Roll-out Cabinet profile installation 270 350 750 88 lb 400-500 550 32 9 37 160 192 224 256 320 450 753 155 lb 500-600 650 9 32 224 37 256 320 416 NOTE: The orange dots indicate fixing screw locations required to meet specified load ratings Cutting dimensions for bottom and back Drawer bottom Width = Inside cabinet width minus 35 (1-3/8") Length = Actual cabinet profile length minus 10 (13/32") Drawer back Width = Inside cabinet width minus 38 (1-1/2") Height = 148 (5-13/16") 148 ICW - 38 AL - 10 ICW ICW - 35 AL = Actual cabinet profile length ICW = Inside cabinet width 38 NOTE: Use 16 (5/8") material for bottom and back Assembly Aids page 54 Accessories page 60 Index page 72 42 © 2019 Blum, Inc. Subject to technical modifications without notice

  43. LEGRABOX Specifications Front fixing bracket installation 20.5 9 16 64 153 min.* 191 min. 32 19 38 min. 24.4 NOTE: For full drawer assembly see page 9 and 67 *Include 2 tilt adjustment Cutting front piece Bottom boring distance Cutting cross rail Using a metal cutting blade, cut front piece to size. Using a metal cutting blade, cut cross rail to size. X = Inside cabinet width minus 126 (4-31/32") X = Inside cabinet width minus 90 (3-17/32") 128 Ø 2.5 x 2 24 48.5 Pre-bore dimension Ø2.5 x 2 43 Dimensions in millimeters (inch equivalents as noted) © 2019 Blum, Inc.

  44. LEGRABOX Wraparound Sink Drawer Application Features ▬ Full extension drawer system with BLUMOTION ▬ Smooth running action ▬ Three-dimensional drawer front adjustment ▬ Dynamic load capacity of 88 lb and 155 lb Space Requirements A AL + 3 A 106 144* 193* M Height AL = Actual cabinet profile length *Minimum opening height based on 3 (1/8") clearance K Height C Height Components 5 2 3 1 4 NOTE: Components showing a M Height wraparound sink drawer application NOTE: Parts identified on right page 44 © 2019 Blum, Inc. Subject to technical modifications without notice

  45. LEGRABOX Specifications Cabinet profile set Inside drawer profile set Outside drawer profile set 1 Cabinet profile Sets includes: ▬ Left and right cabinet profile 2 Drawer profile Sets includes: ▬ Left and right drawer profile ▬ Drawer profiles include color coordinated cover cap 3 Drawer profile Sets includes: ▬ Left and right drawer profile ▬ Drawer profiles include color coordinated cover cap Actual cabinet profile length 550 (21-5/8") Actual cabinet profile length 450 (17-11/16") Actual cabinet profile length 550 (21-5/8") Nominal length Nominal length Nominal length 22" 18" 22" Profile Part no. M Height Part no. M Height Part no. 750.5501S 770M4502S 770M5502S 88 lb Orion gray Orion gray 753.5501S Part no. 770M4502I Part no. 770M5502I Part no. 155 lb Screws Stainless steel Screws Stainless steel K Height 707N 612TH 770K5502S Installation wood screw Installation wood screw Orion gray 661.1300.HG 770K5502I Part no. Installation system screw Stainless steel C Height 770C5502S Orion gray 770C5502I Part no. Stainless steel Screws 612TH Installation wood screw Front fixing bracket options Rear fixing bracket set options ▬ Two M brackets required per drawer ▬ Two M brackets required per drawer 4 EXPANDO 5 Set includes: ▬ Left and right bracket ▬ Two pairs required per drawer ▬ Orion gray (OG-M) Part no. ZF7M70E2 ZF7M7002 EXPANDO Screw-on* ▬ Two M brackets required per drawer ▬ Two K brackets required per drawer Part no. ZB7M000S 612TH Rear fixing bracket set Installation screw ▬ One M bracket required per drawer ▬ One K bracket required per drawer Part no. ZF7M70E2 ZF7M7002 ZF7K70E2 ZF7K7002 EXPANDO Screw-on* Part no. EXPANDO ZB7M000S ZB7K000S 612TH Rear fixing bracket set Screw-on* ▬ Two M brackets required per drawer ▬ Two C brackets required per drawer Rear fixing bracket set Installation screw ▬ One M bracket required per drawer ▬ One C bracket required per drawer Part no. ZF7M70E2 ZF7M7002 ZF7C70E2 ZF7C7002 EXPANDO Part no. Screw-on* ZB7M000S ZB7C000S 612TH Rear fixing bracket set EXPANDO Rear fixing bracket set Screw-on* Installation screw *Use of #6 x 5/8" wood screw recommended 45 Dimensions in millimeters (inch equivalents as noted) © 2019 Blum, Inc.

  46. LEGRABOX Wraparound Sink Drawer Cabinet profile installation 750 88 lb 550 753 155 lb 32 9 160 192 37 224 256 320 NOTE: The orange dots indicate fixing screw locations required to meet specified load ratings Cutting dimensions for bottom and back Drawer bottom Width = Inside cabinet width minus 35 (1-3/8") Length = Actual cabinet profile length minus 10 (13/32") Drawer back Width = Inside cabinet width minus 38 (1-1/2") Height = 63 (2-15/32") Back B1 B2 X* X* Y- 3 Y- 3 63 101 148 M Height K Height Divider C C Height SW+30** 62.5 Y Y Bottom Y = ((ICW - 35) - (SW + 20)) divided by 2 Y min = 115 A SW+20 88 ICW - 35 Notch dimensions 128 36 R10 **minus 3 for ZF7M7002 AL = Actual cabinet profile length ICW = Inside cabinet width SW = Sink width 128 48.5 48.5 38 24 NOTE: Use 16 (5/8") material for bottom, back and divider Assembly Aids page 54 Accessories page 60 Index page 72 46 © 2019 Blum, Inc. Subject to technical modifications without notice

  47. LEGRABOX Specifications Front fixing bracket installation M Height 20.5 Ø10 x 12* 68 min.** 32 106 min. + overlay 51 min. 38 min. 23.4 14 + overlay NOTE: For full drawer assembly see page 9 *Pre-boring dimensions for EXPANDO only, for screw-on pre-bore Ø2 x 2.5 **Includes 2 tilt adjustment Additional front fixing bracket installation page 23 page 27 K Height C Height Rear fixing bracket installation Inside divider installation M Height 8.5* 62.5 11.5 32 Drawer Bottom Additional rear fixing bracket installation NOTE: Use 16 (5/8") material for bottom, back and divider page 20 page 24 K Height *minus 1.5 when using ZF7M7002 C Height 47 Dimensions in millimeters (inch equivalents as noted) © 2019 Blum, Inc.

  48. Precise front gap adjustment The front gap template can be used to precisely and conveniently adjust the front gap to 2.5 mm. Simple, tool-free assembly The TIP-ON BLUMOTION unit can be assembled tool-free, once aligned, the mechanism snaps in place. Cabinet Profile Installation The LEGRABOX S cabinet profile uses standard LEGRABOX installation specifications. 48 48 © 2019 Blum, Inc. Subject to technical modifications without notice © 2018 Blum, Inc. Subject to technical modifications without notice

  49. TIP-ON BLUMOTION for LEGRABOX TIP-ON BLUMOTION combines the best of both worlds ‒ a mechanical, non-electric, opening support system. This allows you to touch the drawer front to open the drawer ‒ and a soft close. TIP-ON BLUMOTION for LEGRABOX provides flexibility by offering the TIP-ON unit in four different strengths. Find your drawer runner length and select the appropriate unit and trigger. A synchronization rod is recommended for all cabinet widths for optimal function. TIP-ON BLUMOTION for LEGRABOX Cabinet Profile TIP-ON BLUMOTION Units and Triggers S1 ‒ Light gray (270 mm) L1 ‒ Light gray (350 mm — 550 mm) L3 ‒ Dust gray (350 mm — 550 mm) L5 ‒ Black (450 mm — 650 mm) Optimal Opening and Closing Function Total weight of drawer, when loaded 66 lb 88 lb Can be used for actual cabinet profile length in mm Unit <22 lb 44 lb 110 lb 132 lb 155 lb 270 S1 0 - 44 lb 0 - 44 lb 350 — 550 L1 44 - 88 lb 350 — 550 450 — 650 L3 88 - 155 lb L5 49 49 Dimensions in millimeters (inch equivalents as noted) © 2018 Blum, Inc. © 2019 Blum, Inc.

  50. LEGRABOX TIP-ON BLUMOTION Application Features ▬ Enables LEGRABOX drawers to be opened with just a light touch of the drawer front ▬ Fully mechanical motion ▬ Smooth running action Space Requirements AL + 3 AL = Actual cabinet profile length Components 1 2 1 3 3/4 NOTE: Parts identified on right page 50 © 2019 Blum, Inc. Subject to technical modifications without notice

More Related