Instant guide for Brother HL 2240 Troubleshoots

1. Brother HL 2240 Troubleshoots Brother HL 2240 is a monochrome printer that can print pages at a speed of 24 ppm. It can print at a resolution of up to 2400 x 600 dpi. It is a laser printer that can print letters, reports, and more. It has a 250-sheet tray and a high-yield toner cartridge included in the package, and comes with 1 year limited warranty. Some of the basic troubleshooting issues on Brother HL 2240 Printer Setup are given below. Brother HL 2240 Drum Light Stays ON cause the drum LED light on the printer to blink continuously. If you are facing such an issue, carry out the procedure given below to stop the blinking light. Sometimes, the printer won't recognize the newly installed cartridge. This will  Make sure the Brother HL 2240 setup printer is properly connected to your computer.  Open the cartridge access door and press the Go button. Hold the button for about four seconds to reset the drum counter.  The four LEDs on the printer will now be lit. Release the Go button and close the cartridge access door.  Now, the drum light will be turned off. Brother HL 2240 Error Light Stays ON  If the error light stays on, first, turn off the Brother HL 2240 setup printer and open the front cove.  Press Go and hold it for about a few seconds.  When all the lights turn on, release the Go button.  You can now restart the printer to stop the error light issue.

2. Brother HL 2240 Won't Feed Paper  If your paper doesn't feed, make sure to load the correct paper size on the tray.  Load the paper stack only below the maximum paper mark.  Turn off the printer and remove all the cables.  Pull out the paper tray and take out the paper stack from it.  Check for paper bits stuck inside the tray and remove any.  Clean up the pick-up rollers using a lint-free cloth.  Now, load paper and insert the tray back to the printer to resolve the issue. Brother HL 2240 Drum Error If you are facing drum issues, open the front cover, and remove the toner cartridge with the drum unit assembly. Check whether the corona wires are dirty and clean them. Verify whether the cartridge has run out. If so, replace the toner cartridge. Insert the drum unit assembly back and restart the printer to fix the issue. Brother HL 2240 Not Printing Ensure that you have connected the printer to a power source. If you have connected your printer and computer using a wireless network, check whether the connection is established. Make sure that the printer is connected to the network. If you are facing issues, try switching to a wired network to check whether the issue has been resolved. If the printer is in the sleep mode, tap any button on the printer to wake it. Check whether the printer is offline and resolve it. Set the Brother printer as the default printing source to fix the issues. On your Windows computer, open the Control Panel window, and go to the Printers and Scanners section. Right-click on the Brother HL 2240 setup printer and click the Set as Default option. If you have a Mac connected to the printer, open the System Preferences window. Go to the Printers & Scanners section and choose the default printer from the drop-down list. These are some of the basic issues faced on using Brother Hl 2240 Printer and their Troubleshooting techniques.