1 / 5

How Does Wheel Alignment Work?

Wheel alignment is not all that physically difficult or difficult to understand - just a very specialized equipment is needed to determine the angle of inclination of the wheel. After that, it's just that all the bolts and adjust the rotation, until you get all of that in the specifications. Some get a little bit here and there can make the difference between a car that provides a predictable, reliable performance, and one that chews through tires and every drop of fuel is restored just before hitting a tree.

BaganMart
Download Presentation

How Does Wheel Alignment Work?

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. How Does Wheel Alignment Work?

  2. Camber • Camber refers to bend inward or outward of the tire. Completely vertical tire has no camber, or zero degrees camber. One which protrudes at the top has a certain degree of positive fit, while the one which tilts inwardly inclined downward. Negative camber helps keep your tires planted at the turn, but reduces the braking and acceleration and stability at high speed. Positive camber - outward tilt - has no real advantages in terms of handling, braking, acceleration or stability. Excess negative camber make your tires wear faster than the inside of the outer edge, and a positive camber will be discharged faster at the outer edge.

  3. Caster • Imagine looking at the rim side and then draw an imaginary line from the top of the ball joint through the lower joint all the way to the ground. Now imagine a vertical line is completely straight through the center of the wheel. You will see that a line drawn through the ball joints hits the ground, just in front of the vertical line. The ball joint line is your wheel's pivot axis, while the vertical line, which applies the tire force. The greater the distance between the pivot line and the vertical line - the more advance angle - the harder the wheel would attempt to center during rotation. More advancing angle is greater steering effort, but the result is increased speed stability and better steering precision and feedback.

  4. Toe Angle • Imagine standing on the hood of your car's windscreen with your body forward, your eyes looking down at the wheels. If you could see the tires through the fenders, you understand that you probably do not indicate on the front; or good angle to each other in the front or at a distance from each other. If the wheels point to another in a state of convergence that will always try to pull the car to the center. This increases stability at high speed, but painful treatment response. Toe-out can help make the car more flexible, but can also make it a bit twitchy. Zero toe, or completely parallel adjustment, improves fuel efficiency and tire life, because the tires are not moving sideways - known as scrubbing - as you drive down the road.

  5. Thanks For Watching • www.baganmart.com • www.facebook.com/baganmart • www.twitter.com/@BaganBlog

More Related