1 / 9

Guide for Asphalt Driveways

An asphalt driveway, often known as a "hot top" or "blacktop," needs to be sealed, which <br>takes time. When water pools at the base due to material faults and seeps through, it <br>weakens the base's structural integrity and causes potholes. In colder areas, damage <br>from freezing also serves as a free pass for water-filled cracks. Even in warm climates,<br> grass can begin to emerge from surface cracks. Protecting asphalt driveways from UV <br>radiation and oil or gas leak damage is another excellent reason to seal them.<br>

Canandian
Download Presentation

Guide for Asphalt Driveways

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Guide for Asphalt Driveways

  2. It takes time, but sealing an asphalt driveway—also referred to as "hot top" or "blacktop"—is vital. Potholes are created when water seeps through material flaws and collects at the base, weakening the base's structural integrity. In colder climates, damage from freezing is also an open invitation for cracks filled with water. Even in warm regions, grass can start to sprout up through surface gaps. Another good reason to seal asphalt driveways is to protect them from damage caused by UV rays and oil or gas leaks.

  3. After installation, the asphalt driveway sealer needs to be reapplied every one to three years for the first six months. However, a sealant shouldn't be used right away after installation because the hot top needs 30 days to cure. Asphalt driveways should be sealed once a year in regions with severe winters, but beware of the slippery surface that may result.

  4. Instructions Tidy up the area Sweep the surface with a push broom to remove any grass that is hanging over the edges. Any oil or gas stains should be removed with a stiff-bristled brush and a detergent designed for this purpose, which can be purchased at auto supply shops.

  5. Fill in voids and crevices To repair significant cracks or depressions in the asphalt, use patching chemicals, which are readily available at home improvement stores. For these compounds' drying times, refer to the label.

  6. Spray the asphalt down Spray down the area vigorously with the garden hose or a power washer to get rid of any dirt that was missed during the sweeping procedure. Let the surface dry out.

  7. Blend the Sealant To pre-mix the contents, flip the driveway sealer bottle on its side with the lid closed. As soon as the tub is opened, keep stirring occasionally to ensure that the sealant is still thoroughly blended.

  8. Put the sealant on Pour some of the asphalt driveway sealers on the surface, starting in one corner. Instead of completing lengthy thin strips, you'll probably find it easier to work on one tiny square portion of around 10 to 20 square feet at a time. Apply your sealant with a long-handled application brush or squeegee in thin, overlapping applications. Remember that applying a thicker coating of sealant won't offer more protection; instead, adhere to the manufacturer's recommendations.

  9. Let the sealant dry A minimum of 24 hours must pass for the surface to dry, during which time no traffic of any type should be allowed on it. To prevent cars from entering your yard, place barrels there or just use the empty sealer tubs. Install a post on either side of the entry and put yellow construction tape in between the posts for better visibility.

More Related