1 / 40

Heterogeneous Teams of Modular Robots for Mapping and Exploration

Heterogeneous Teams of Modular Robots for Mapping and Exploration Speaker: Hyokyeong Lee Feb 13, 2001 Abstract Design of a team of Heterogeneous and centimeter-scale robots Collaborate to map and explore unknown environments Millibots are configured from modular components

Faraday
Download Presentation

Heterogeneous Teams of Modular Robots for Mapping and Exploration

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Heterogeneous Teams of Modular Robots for Mapping and Exploration Speaker: Hyokyeong Lee Feb 13, 2001

  2. Abstract • Design of a team of • Heterogeneous and centimeter-scale robots • Collaborate to map and explore unknown environments • Millibots are configured from modular components • Sonar and IR sensors,Camera,Communication,Computation,Mobility • For mapping and exploration • Critical to know the relative position of each robot • Novel localization system • Sonar-based distance measurements to determine the positions of all the robots in the group • Occupancy grid Bayesian mapping algorithm to combine the sensor data from multiple robots

  3. Introduction • Advantages of a team of robots • Load distribution • Smaller, lighter, less expensive robot • Sensing • A team of robot • Perceive environment from multiple disparate viewpoints • Task completion by a team of collaborating robots • A single robot • A single point of view • Distributed viewpoints • Surveillance, monitoring,demining and plume detection

  4. Introduction • Traditional robots • Designed with broad array of capabilities • Redundant components to avoid system failure • Large,complex,expensive system • Robot teams • “Build simple inexpensive robots with limited capabilities that can accomplish the task reliably through cooperation” • Each robot may not be very capable, but team accomplishes useful task • Less expensive robots that are easier to maintain and debug • Each robot is expendable, reliability in numbers

  5. Introduction • Size of a robot determines its capabilities • Hierarchical robot team (Figure 1) • All Terrain Vehicles(ATVs) • Pioneer robots • Medium-sized Tank robots • Centimeter scale Millibots

  6. Introduction

  7. Introduction • All Terrain Vehicles(ATVs) • Range of up to 100 miles • Completely autonomous • Extensive computational power • Transport and deploy groups of smaller robots • Pioneer robots • Port-based adaptive agents • Allow the team to dynamically exchange algorithm and state information while on-line

  8. Introduction • Medium-sized Tank robots • Medium-sized, autonomous robots with infrared and sonar arrays • Swivel-mounted camera • On-board 486 computer • Capable of individual mission • Serve as the leader and coordinator for a team of Millibots

  9. Introduction • Millibots • Small and lightweight robots • Maneuver through small openings and into tight corner to observe areas that are not accessible to the larger robots • Small so less noticeable

  10. Milibots • Size • Primary factor that determines what a robot can do and where it can go • Small robot • Advantage • Crawl through pipes, inspect collapsed buildings, hide in small inconspicuous spaces,dramatic impacts for surveillance and exploration task • Disadvantage • Limited mobility range, limited energy availability, reduced sensing, communication and computation ability due to size and power constraints • Trade-off

  11. Small Robots • Khepera • Ants • FIRA&RobotCup

  12. Khepera • Small size & computing complexity • Significant on-board processing • Modular • Support addition of sensor and processing modules • Work alone or communicate and act with other robots • Lack a significant feature: self-localization • Operate in an unknown environment • Combine sensor information • Act as a central, cohesive unit • Rely on fixed position global sensor or internal dead-reckoning • Ineffective as a deployable set of robots • A pair of centimeter sized wheels • Restricts the robot’s clearance to about 3mm

  13. Ants • Same scale as the Millibots • Designed to be used in groups or teams • Limited in sensing • Designed to explore reactive social behaviors • Not support a real-time communication link • Not exchange information necessary to produce maps or models of the environment • Built with a fixed architecture to achieve scale • Propulsion, sensing, processing are combined • Addition of new functionality requires complete redesign • Inability to localize • Rely on strong light source for orientation and encoders for dead reckoning • Without a means for determining position, little context in which to evaluate data

  14. FIRA&RobotCup • Small-scale cooperating robots • Coordinate to perform complex actions against a coordinated attack • Extremely limited in sensing capabilities • Position sensing via a global camera • Little or no sensors on the robots themselves • Blind and unable to respond to real world event without external camera

  15. Specialization • Specialization • Achieved by exploiting the nature of a heterogeneous team • Instead of all-equipped robot, build specialized robots for a particular aspect of the task • Scenarios • Robot team composed of robots with various range and position sensors but only limited computation capabilities • Omitting the unnecessary capabilities • Reduction of power, volume, and weight of the robot • Disadvantage • Many different robots need to be available to address the specific requirements of a given task

  16. Modular Architecture • Specialization through modularity optimizes resource • A robot with only mission specific modules • Minimum size and cost of the robot • Reduction of unnecessary payload • Less weight, less power • Smaller and cheaper • Robots in large numbers to achieve dense sensing coverage, team level adaptability, and fault tolerance • Figure 2 • Coordination between modules • Dedicated slots • Fixed connections that support up to six sensors or actuator modules • Common I2C bus • High speed, synchronous clock • Two-way data communication line

  17. Millibot’s architecture and subsystems

  18. Millibot subsystems • Seven subsystems • Main processor module • Communication module • IR obstacle detection module • Two types of sonar modules • Motor control module • Localization module

  19. Communication • Essential in a coordinated team • Collaborative mapping and exploration • Detailed and abstract information • Not easily conveyed implicitly • To provide two-way communications within group • Each robot is equipped with radio frequency transmitter and receiver • Exchange data at 4800 bps at a distance of up to 100 meters • Units based on size and power considerations

  20. Sensors • A set of ultrasonic sonar modules • Short-range distance information • For obstacles between 0 and 0.5m • Ideal for work in tight or cluttered areas • Long-range distance information • For obstacles between 0.15m and 1.8m • Effective in hallways or open office space • Potential complication with ultrasonic based sensor • Interference with similar modules on other robots • Sonar elements operate at a fixed frequency determined by mechanical construction • Carry infrared proximity module to overcome this problem • Provide an array of five tunable, infrared emitter-detector pairs

  21. Sensors • Still problem in spite of sensor • Anomalies in real situation • Need high bandwidth information during a mission for analysis by a higher level process or operator • Camera module as a solution • External mini camera • A small video transmitter • included with the module to transmit the raw video signal to an external processor or remote viewing station • Power circuitry • Allows the camera and its transmitter to be switched on and off via control signal from the Millibot • Resources minimization • Only one receiving station and associated monitoring device is needed per Millibot group • Cannot be used continuously due to limited size of the battery

  22. Collaboration • To know relative position and orientation of the robots • Localization method • Dead reckoning • Accuracy problems due to integration error and wheel slippage • Camera-based localization • Not feasible in small robots • Global Positioning Systems (GPS) • Not appropriate for use in small robots that operate mostly indoors • Landmark recognition, map-based positioning • Require excessive local computational power and Sensing accuracy on Millibots

  23. Collaborative Localization • Millibot localization system • Based on trilateration • Determines the position of each robot based on distance measurements to stationary robots with known positions • Localization module • Utilizes ultrasound and radio pulses • Act as both emitter and receiver • Figure 3 • Low-cost ultrasonic transducer • To produce and detect beacon signals • Coverage of 360 degree, measure distance up to 3m with a resolution of 8mm while consuming 25mW • Paramount in achieving a localization system at this scale

  24. 343m/s 3X108m/s

  25. Localization Algorithm • Maximum likelihood estimator • Measurements are noisy and missing • Purely geometric approach is over-constrained, does not yield a solution • Assumption • We know the position of an orientation, (x0,y0,0) of all the robots at time t0 • How determine the position, (x1,y1,1), of the robots at time t1 after they have moved • Estimate the new position based on informaton • Dead reckoning • Distance measurements

  26. Dead reckoning • Millibots always move according to “vector commands”, (,d) • :rotation in place over an angle  • d:forward straight-line motion over a distance d • : angle over which the robot rotates while moving forward • Unplanned rotation due to wheel slippage and calibration errors in the controller

  27. Dead reckoning

  28. Distance measurements • Each robot that moved pings its localization beacon to determine its distance to all the other robots • Resulting measurement data provides accurate data to overcome the drift encountered in localization algorithm based on dead reckoning alone

  29. Likelihood • Assume that dead reckoning data and distance measurements are normally distributed • Dead reckoning • The likelihood that a robot moved over • Over an angle • Distance • given initial position • final position

  30. Likelihood • Distance measurements • The likelihood that the measured distance between two robots i,j is equal to Di,j

  31. Likelihood • Total conditional likelihood function is the product of all the conditional likelihoods introduced • The most likely robot positions are found by maximizing Ptot with respect to the new robot positions

  32. Implementation Issues • Optimization of the conditional probability density function • Formulated as a weighted nonlinear least-square problem • BFGS nonlinear optimization algorithm • When no prior information about robot positions is available, the BFGS algorithm may get stuck in a local minimum • Dead reckoning data provides a good starting point • Only a few iterations are necessary to reach optimum • Taking the best-out-of-five randomly initialized runs never fails to find the global optimum • Filter the raw measurement data • Obtain good results with the above algorithm • Improvement of accuracy of the algorithm by using more than three robot beacons • Median and mean filtering reduced the standard deviation of the distance measurement

  33. Mapping and Exploration • A group of Millibots can be equipped with similar sensors to cover more area in less time than a single robot • Team leader(or human operator) • Utilize the robot’s local map information • Direct the Millibot around obstacles • Investigate anomalies • Generate new paths • Merge the information from several local maps into a single global map • Map aids in path planning for the movement and positioning of the team during exploration

  34. Mapping and Exploration • Occupancy grid with a Bayesian update rule • Produce maps of the environment • Allows the combination of sensor readings from different robots and different time instances • Occupancy value • 1: occupied by an obstacle • 0: free cell

  35. Experimental Results • Task to explore and map as much area as possible before the team failed • Possible failures included • Loss of localization, loss of battery power, loss of communications • For each experiment • Three Millibots equipped with sonar arrays for collecting map information • Two Millibots equipped with camera modules to aid in obstacle identification and provide a level of fault tolerance • All equipped with localization module • CyberRAVE • A central control server and a set of distributed GUI • Operator directs the robots by setting goals,querying maps, and viewing live sensor data

  36. Operation of the Team • First experiment • Test and verify the team’s ability to localize and collect map data • Second experiment • At the center right of the hallway which included a cluster of objects against one of the walls • Detect and avoid the obstacles and remained operational for more than an hour • Loss of a camera robot but mission was continued • Third experiment • A large number of obstacles which were small and low to the ground making them invisible to the sonar sensors • Camera modules played a significant role • Prior to moving any robot , camera scan the area in front of the robot • Reduced the exploration speed

  37. Merging result

  38. Metrics • Evaluate and compare the performance of the team

  39. Summary • Present the design of a distributed robotic system consisting of very small mobile robots • Modular fashion to expand the capabilities • Novel ultrasound-based localization system • Does not need require any fixed beacons • Using Millibots alternatively as beacons and as localization receivers • Can reposition while maintaining accurate localization estimates at all times

  40. Critics • Ambiguous in path planning by the operator • By intuition? • By which ground, can we say that a deviation of 3% in the distance measurement is good? • Is 3% acceptable? • In occupancy grid, how is the homogeneous cell size determined? • Suggestion • How about using learning and reasoning algorithm to implement fully autonomous system

More Related