5 Most Common Furnace Problems And How To Resolve Them

1. The Top 5 Furnace Issues and How to Fix Them Most homes in Utah require heating systems because the winters there are chilly and snowy. But eventually, your furnace will fail, just like other mechanical systems do. Therefore, it's essential to be aware of the most frequent furnace issues, their causes, and potential solutions to prevent them earlier. What are the most typical issues with furnaces? Here are a few that could come up throughout your heater's life. Insufficient Heat Your furnace may not be blowing warm air, which may surprise and disturb you, but there is an easy fix. First, to see if your thermostat is set to "heat," check it. If not, the furnace is not functioning, but the fan is. Then raise the temperature if necessary because it can be too low to heat your home. Another reason for insufficient heat could be a filthy or clogged furnace filter that reduces airflow. Fortunately, changing the old filter with a new one is simple. Your furnace may have a problem with the pilot light, ignition, burner, or heat exchanger, even after you've checked the thermostat and filter. So instead, let a specialist do it. Frequent Cycling One of the most typical furnace issues is your furnace turning on and off a lot. When your heater short-cycles, it turns off and on again for shorter periods of time, frequently without achieving the desired temperature. So contact our experts for the furnace installation in Orem.

2. Lack of ventilation results in frequent cycling, which causes the furnace to overheat and shut off as a safety measure. This accelerates the wear and tear of your unit if left unchecked. Replace clogged filters to allow air to flow freely; if not, get in touch with a local contractor to look into the problem. Furnace Not Turning On or Stopped Working Several factors could cause your furnace to stop functioning. Tripping the circuit breaker is one of the most common causes of a furnace not operating. This occurs when a switch shuts off the flow of electricity out of caution due to an excessive electrical load. Since there is no way to kick start heating your home, a furnace will occasionally not turn on due to a malfunctioning pilot light or ignition? It might also be caused by a clogged filter preventing airflow, a thermostat that is set to "cool" rather than heat, or a safety switch that has been activated. It's time to call a qualified expert for the proper diagnostic if you're not sure why your furnace shuts off or won't switch on. Not Blowing Air It seems like your furnace is producing heat, but it's not circulating the conditioned air. There can be many causes, like most typical furnace issues. A clogged blower is one explanation that could exist. Try to sweep out any accumulated material to prevent your blower from malfunctioning. Avoid attempting to resolve the problem yourself if a red light is blinking and call a technician in its place for the furnace replacement in Orem, UT. To keep the fan motor working, a blower belt that is damaged or frayed is required. The fan cannot expel the heated air when it snaps, becomes loose, or becomes worn out. Let a qualified professional replace it. Odd, Loud Noises If your furnace starts generating loud noises instead of the usual gentle hum, don't ignore it. Unusual noises like popping, pinging, rattling, grinding, scraping, or screeching can indicate several heater-related issues. Turn To the Experts Look no further than JP Heating and Cooling at the earliest indications of trouble with your heating apparatus. We are a reputable furnace company offering excellent services, from furnace maintenance to new installs or HVAC contractor in Orem, UT, that many in and around Lehi, Utah, prefer.