Metalizing Gun | Metalizing Gun Manufacturer in India

1. Metalizing Gun Metalizing is a general name given to a thermal spray coating process that is used for place metal on product surfaces. The resulting metallic coatings can be used for protection, ornamental or functional purposes. These coatings are also known to be long-lasting, emphatic, and highly changeable. Product Details: Air Pressure 70-100 psi Nozzle Size 3.15 mm Form Wire Air Consumption 8-9 cfm Air Inlet 3/8" Sound Pressure 115 dB Metalizing Gun In Metalizing Gun a Thermal Spraying is a group of coating processes in which finely separated metallic or nonmetallic materials are placed in a molten or semi-molten condition to form a coating. The covering material may be in the form of powder, ceramic-rod, or wire. Thermal Spraying has an advantage over other processes as it is a cold process & as a result, it never spoils parent material. The thickness of the coating is controllable, no matter what the job size is. Loss of surface properties due to wear, corrosion, erosion, etc. Can be avoided in a cost-effective method by thermal spray gun coating. Metalizing Gun Process Metalizing is the process of melting metal and propelling it in finely divided form against an object to be coated. A number of different types of equipment have been developed to perform this process. According to the equipment used, the metal may be supplied in the form of either wire or powder and may lie melted by either an electric arc or an oxy-acetylene flame. The most practical metalizing guns today use metal

2. supplied in the form of wire and utilize a name for melting the metal. The flame used in the flame spray gun is usually an oxy-acetylene flame, but other gases may be used in place of acetylene, such as propane, hydrogen, coal gas, etc. Metalizing guns of this type consist of two major parts. The body of the gun constitutes the wire feeding mechanism which conveys the wire to the melting zone. The power is supplied by a high-speed air turbine which drives the wire feed rolls through a train of years. The most modern equipment of this type has a variable speed valve built into the housing with the turbine. This type of equipment will provide a speed regulation of closer than five percent from no load to full load over a wire-speed range of from two and one-half to 12 and one-half feet per minute. Advantages of Metalizing Gun •To achieve insulation. •Resistance to corrosion. •Significant cost advantages. •No cure time or temperature to limit metalizing. •Anodic protection of the surface. •Stronger adhesion than paint. •Longer lasting than paint. Industrial Uses •Automobile Industry. •Aroma Industry. •Glass Industry. We are the manufacturer of Metal Spray Gun, WireFlame Spray Gun, Powder Flame Spray Gun, Metalizing Gun are the same kinds of equipment – All these are using in Coating so it’s also called as Equipment. We are the Largest Manufacturer of Zinc Spray Gun.