1 / 2

BLAST FURNACE GAS FLOW MEASUREMENT IN STEEL PLANT

Wondering which instrument is best for blast furnace gas flow measurement in steel plant? We've got you covered with its Leomi Insertion Thermal Mass flowmeter. Read more- https://leomi.in/blast-furnace-gas-flow-measurement-in-steel-plant/

LEOMI
Download Presentation

BLAST FURNACE GAS FLOW MEASUREMENT IN STEEL PLANT

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. BLAST FURNACE GAS FLOW MEASUREMENT IN STEEL PLANT In steel industries Blast furnaces have a key role in smelting iron ore together with fuel (coke) and flux (limestone) continuously supplied from the top of the furnace. Hot blast air with oxygen enrichment is blown into the lower section of the furnace through a series of pipes (tuyeres). This results in chemical reactions while material falls downwards in the furnace. Flue gas ( Blast furnace gas) a low calorie will exit from the top of the furnace which in turn is used in other low heating furnaces in other steel processes. Blast furnace gas typically consists of mainly N2(50-55%), CO (20-25%), CO2(16-18%) etc. It contains some moisture content and carbon particle dirt sticky in nature but cleanable. Leomi provides a Leomi-586 Insertion Thermal Mass flowmeter which works excellent in these demanding applications against existing Orifice Or Averaging Pitot tube-based DP type flow transmitters.

  2. THE MAJOR ADVANTAGE OF INSERTION THERMAL MASS FLOWMETER IN THIS APPLICATION: Measures too low velocity of 0.6m/s or less & No pressure drop Easy installation in minimum time for large pipe diameter Easily removable sensor probe for periodic cleaning when needed    A MAJOR LIMITATION OF EXISTING DP-TYPE FLOW METER IN USE: Significant pressure drop limits low flow range measurement Difficult to install and also time-consuming with the high initial cost Non-removable design is difficult for such application   

More Related