Floating Ball Valve Manufacturer in USA

1. Floating Ball Valve Manufacturer in USA SVR Global is the top Floating ball valve manufacturer in USA. Our valves are a popular choice in oil and gas industries, chemical industries, power generation industries in Texas, Ohio and New Jersey. A floating ball valve is a type of quarter-turn valve that uses a ball-shaped disk to regulate the flow of fluids. It is called a "floating" ball valve because the ball is not fixed in place but instead floats between two or more seats, allowing the ball to move freely as the valve opens or closes. This valve is made up from forging material. Forging material has greater strength under high temperature operation and high pressure as compared to other materials. They also have high resistance to fatigue cracking. This type of valve regulates the flow of a liquids or gas through a ball which rotates and that has a drag. They have considerably long life span and work at optimal level even if the valve isn’t utilized for a long time. These valves are simpler to use and is operated by moving the lever handle clockwise and closed by rotating the lever handle counterclockwise. PARTS •Body: The body of the valve is the outer shell that encases the internal components of the valve. •Ball: The ball is the internal component that controls the flow of fluid through the valve. It is typically made of metal or a hard material and is designed to float in the fluid. •Seat: The seat is the part of the valve that the ball comes into contact with when the valve is closed. It is typically made of a soft material like rubber or Teflon to prevent damage to the ball. •Stem: The stem is the component that connects the handle or actuator to the ball. It is responsible for rotating the ball within the valve body to control the flow of fluid. •Handle or actuator: The handle or actuator is the part of the valve that the operator uses to control the flow of fluid. It can be a simple lever or wheel, or it can be an automated device that uses electrical or pneumatic power to control the valve. •Seals: The valve has a series of seals that prevent fluid from leaking out of the valve body. These seals are typically made of rubber or Teflon and are located between the ball, seat, and stem. •Bearings: The valve has bearings that support the ball and allow it to rotate freely within the valve body. INDUSTRIES •Chemical Industry •Petrochemical Industry •Power Industry •Oil and gas Industry •Mining Industry •Marine Industry

2. •Gas Supply and Water Supply Industry •Construction industry Advantages of Floating Ball Valve •Excellent sealing: Floating ball valves use soft seals that create a tight seal between the ball and the valve body, preventing leaks and minimizing the risk of product contamination. •High flow capacity: The streamlined design of the ball in a floating ball valve allows for a high flow capacity, making it suitable for applications where high flow rates are required. •Versatility: Floating ball valves can be used with a wide range of fluids, including corrosive and abrasive fluids, as well as gases and liquids. •Low operating torque: Floating ball valves require relatively low operating torque, making them easy to operate manually or with automated actuators. •Easy maintenance: The simple design of floating ball valves makes them easy to maintain and repair, minimizing downtime and reducing maintenance costs. •Long service life: Floating ball valves are durable and long-lasting, making them a cost- effective choice for many industrial applications .APPLICATIONS •widely used in the oil and gas industry to control the flow of crude oil, natural gas, and other fluids through pipelines and processing facilities. •used to control the flow of chemicals through pipelines in chemical processing plants. •used in water treatment plants to control the flow of water through various stages of the treatment process. •used in power plants to control the flow of steam, water, and other fluids through turbines and other equipment. SVR Global is the certified Floating ball valve manufacturer in USA and has the following technical details- Materials: cast Iron, SS316, SS304, F22, F51, LF2, F304, F304L, F316, F316L, cast steel (WCB, WCC, WC6, WC9) Class: 150 to 2500 Ends: flanged, socket weld, butt weld, threaded Size: 1/4’’ to 48’’ Pressure: PN 10 – PN 450 Operation: lever operated, gear operated, electric actuated, pneumatic actuated Visit our site for more information- https://svrglobal.net/products/floating-ball-valve/