MICRO CENTRIFUGE 13000 R.P.M.WT-12

1. Since 1954 Since 1954 ® Micro Centrifuge 13000 R.P.M. Rotor of Micro Centrifuge 12 tubes of 1.5ml/2ml capacity WT-12 Technical Specication: — High speed Micro Centrifuge Max. R.P.M. 13000. — Heavy duty plastic injection moulded body. — Stainless Steel protection bowl. — Fitted with well balance universal motor having long life with imported carbons. — 2 lines of 16 character LCD display of r.p.m., R.c.f, timer 0-99 minutes Display of set and run time — Digital timer which can be set from 0-99 minutes in interval of 1 minute. — Programmable Speed Regulator from 100 to 13000 in variation of 100 rpm — Last test parameter recall and displays automatically on LCD ØMicroprocessor based Ø Motor remain cool even after running full time Ø Motor Fitted on anti vibration springs supported with rubber covering from inside and out side. Ø Low sound, very stable Supply completed with following accessories: 4 Rotor Head to accommodate 12 eppendorf/ Micro Centrifuge Tubes with 4 cover of 1.5ml /2ml (12 x 1.5/2ml) 4 Reduction adopters for 0.2/0.5ml eppendorf (Micro Centrifuge Tubes). 4 Head Puller, Spanner, Inst. Manual, Cord & plug to work on 220 volts 50Hz A.C. Optional at extra cost : Rotor head to accommodate 24 micro tubes. (Max speed 13000 rpm). Angle Rotor Head to accommodate 24 eppendrof / Micro centrifuge tube of1.5ml / 2ml (24 x 1.5/2ml), Max. Speed 13000 rpm also supplied withReduction adopters for 0.2/0.5ml eppendrof (Micro Centrifuge Tubes). Angle Rotor Head 8 x 5ml, Maximum Speed 13000 r.p.m. Angle Rotor Head 4 PCR Strip of 8 x 0.2 ml., Maximum Speed 13000 r.p.m. } } } } :2 1 0 1 5 0 0 9 Tel : (91) 171 4002952, Ph. : (91) 94664 09560, Emai l: info@weswoxindia.com