1 / 16

CHAPTER 22

CHAPTER 22. Machining Processes Used to Produce Round Shapes. Cutting Operations. Figure 22.1 Various cutting operations that can be performed on a late. Not that all parts have circular symmetry. Components of a Lathe.

alden
Download Presentation

CHAPTER 22

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. CHAPTER 22 Machining Processes Used to Produce Round Shapes

  2. Cutting Operations Figure 22.1 Various cutting operations that can be performed on a late. Not that all parts have circular symmetry.

  3. Components of a Lathe Figure 22.2 Components of a lathe. Source: Courtesy of Heidenreich & Harbeck

  4. General Characteristics of Machining Processes

  5. Schematic Illustration of a Turning Operation Figure 22.3 (a) Schematic illustration of a turning operation showing depth of cut, d, and feed, f. Cutting speed is the surface speed of the workpiece at the Fc, is the cutting force, Ft is the thrust or feed force (in the direction of feed, Fr is the radial force that tends to push the tool away from the workpiece being machined. Compare this figure with Fig. 20.11 for a two-dimensional cutting operation.

  6. Right-Hand Cutting Tool Figure 22.4 (a) Designations and symbols for a right-hand cutting tool; solid high-speed-steel tools have a similar designation. Right-hand means that the tool travels from right to left as shown in Fig. 22.1a. (continued)

  7. Right-Hand Cutting Tool (cont.) Figure 22.4 (continued) (b) Square insert in a right-hand toolholder for a turning operation. A wide variety of toolholders are available for holding inserts at various angles. Source: Kennametal Inc.

  8. General Recommendations for Turning Tool Angles

  9. Summary of Turning Parameters and Formulas

  10. Cutting Speeds for Various Tool Materials Figure 22.5 The range of applicable cutting speeds and feeds for a variety of tool materials. Source: Valenite.

  11. General Recommendations for Turning Operations

  12. General Recommendations for Turning Operations (cont.)

  13. General Recommendations for Turning Operations (cont.)

  14. General Recommendations for Turning Operations (cont.)

  15. General Recommendations for Cutting Fluids for Machining

  16. Typical Capacities and Maximum Workpiece Dimensions for Machine Tools

More Related