1 / 44

REALIZING YOUR IDEAS

REALIZING YOUR IDEAS. The Small Highly Productive Microwave speed wave MWS-2. Facts. Technical Data Design Temperature Control Control System Pressure Vessels Documentation Safety PC Software ! New ! Accessories Service. Technical Data. Microwave power: 1,000 Watt magnetron

alessa
Download Presentation

REALIZING YOUR IDEAS

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. REALIZING YOUR IDEAS

  2. The Small Highly Productive Microwave speedwave MWS-2

  3. Facts • Technical Data • Design • Temperature Control • Control System • Pressure Vessels • Documentation • Safety • PC Software ! New ! • Accessories • Service

  4. Technical Data • Microwave power: 1,000 Watt magnetron • Frequency: 2,450 MHz • Unpulsed between 400 and 1,000 Watt • Integrated control system • RS-232 interface (documentation with external PC) • Oven: 26 Litre • Weight: 14 kg • 230 Volt, 50/60 Hz

  5. Design • Small, compact tabletop instrument • Stainless steel housing • Integrated suction system • Non-Contact IR-temperature measurement of all samples • Magnetron with 1,000 Watt • Unpulsed between 400 and 1,000 Watt

  6. Patented, non-contact IR-temperature measurement of all samplesNo contamination Control of all vessels Increased savety • Detection of all sample temperatures • No time delay through heating of sensors • No connection of sensors • Maintenance-free

  7. Frequency range of BERGHOF mid-IR technology IR-spektrum of TFM Heat radiation of sample (black body) (2,5 µm) (10 µm)

  8. IR-measurement at wavelength, where TFM does not absorb IR-radiation • Thermal radiation of the vessel is filtered out TFM Heat radiation of vessel surface Heat radiation of sample IR-Sensor FilterIR-radiation

  9. inside temperature sample temperature (mid-IR sensor) outside temperature of vessel (IR-sensor) Broadband Technology BERGHOF mid-IR Control • No temperatures detectable in the first 7-10min. by broadband technology • No detection of exothermic reactions by broadband technology

  10. Integrated control system • English • Simple, self-explaining operation • Real-time display of highest sample temperature • Temperature control • 6 pre-installed applications • One free programmable application • Sample concentration with additional temperature control

  11. Digestion Vessels 1 - 10 Mikrowavepower TemperatureMeasurement Control by Tmax Controller  Microwave Power is permanently controlled by temperature of all samples Real-TimeDisplay External PC

  12. Control System - Keypad and Display Berghof MWS2 select prog! parameter change next step new program programm keys programmstop / start

  13. Berghof MWS2 select prog! Berghof MWS2 press start programm keys programmstart Control System - Selection of Applications / Routine Start

  14. step1: temp 150°C increase/decrease temperature, time or power step1:time 5 min next step or item step1:power 40 % select programm prog Control System - Programming a Application repeat for step 2 and 3

  15. 1 04:29 80% T=low>>150°C programmstop / start Control System - Real Time Display of Sample Temperature

  16. Control System - Documentation with external PC

  17. Mat. Vol. P-test P-max. T-max. T-max. No. • (continuous)(short time) • DAP-60K TFM 60 ml 60 bar 40 bar 220°C 260°C 10 • DAQ-10 Quartz 10 ml 100 bar 75 bar 220°C 260°C 24 • DAC-10 TFM / Ceramic 10 ml 100 bar 75 bar 220°C 260°C 24 • DAK-70 TFM / Ceramic 70ml 150 bar 100bar 220°C 260°C 5 Pressure Vessels - Survey

  18. Pressure Vessels DAP-60K • Completely made of TFM • Rupture discs as overpressure safety device • Simple handling

  19. Pressure Vessels - Handling DAP-60K • Weighing of the sample • Addition of reagent • Insert the lid / visual check of the rupture disc • Screw on the cap finger-tight • Insert the vessel into the rotor • Put the rotor into the microwave • Select an application • Start the microwave • Cooling of the vessels (approx. 20 min., possibly outside microwave) • Open the vessels manually • Transfer the solution

  20. Visual check • Lid + Rupture disc • Insert the rupture disc Pressure Vessels - Handling DAP-60K

  21. Insert the lid • Screw on the cap finger- tight Pressure Vessels - Handling DAP-60K

  22. Insert vessel into rotor • Close unused positions Pressure Vessels - Handling DAP-60K

  23. Loading microwave with rotor • Connect exhaust tubing Pressure Vessels - Loading of Microwave

  24. Open the vessel Pressure Vessel - Handling DAP-60K

  25. TFM-lid • Rupture disc • Retainer ring • Insert the rupture disc • Insert into TFM-lid Pressure Vessels - Handling DAQ-10

  26. Weighing of sample • Add reagent • Expand sealing lip Pressure Vessels - Handling DAQ-10

  27. Insert lid into quartz vessel • Put in the rotor • Close finger-tight Pressure Vessels - Handling DAQ-10

  28. Close PP-box • Insert into PP-box Pressure Vessels - Handling DAQ-10

  29. Pressure Vessels - Handling DAK-70 • Completely made of TFM with ceramic pressure jacket • TFM-liner • Rupture discs as overpressure safety device • Simple handling

  30. Insert the lid • Install the support ring • Screw on the cap finger-tight Pressure Vessels - Handling DAK-70

  31. Pressure Vessels - Handling DAK-70 • Weighing of the sample • Addition of reagent • Insert the lid / visual check of the rupture disc • Screw on the cap finger-tight • Insert the vessel into the rotor • Put the rotor into the microwave • Select an application • Start the microwave • Cooling of the vessels (approx. 30 min., possibly outside microwave) • Vent the vessel with the pressure relief valve • Open the vessels manually • Transfer the solution

  32. Safety Concept Avoiding damages thorugh innovative instrument concept • pure TFM-vessels no explosions possible chemicaly absolutely inert (PEEK and Kevlar don´t comply with this) • suction system no acidic vapours in the microwave oven • Ban of Solvents absolut safety is impossible by ventilation of the oven several explosions were reported worldwide • IR-Temp.-Measurement control mechanism reacts on fast exothermic reactions no leakages on sensing system operation is not influenced by acids and microwaves • Metallic rupture discs guarantees fast and reproducable pressure relief, thanks to metallic material and high diametre

  33. Safety • Integrated suction system • Shut-down when the door is unlocked • Control of the sample temperature in all vessels • Shut-down when a sample is overheated • Shut-down after burst of a rupture disc • Rupture discs in all vessels • Controlled ventilation of vessels during opening

  34. Safety - Vessel material TFM Experiment: • Blocking the rupture-disc • Digestion at about 80 bar • Thereby the pressure limit was exceeded by factor 2 Result: • Vessel didn´t get untight • TFM gets weaker and deformable at higher temperatures. Pressure vessels don´t tear or explode and are very safe therefore.

  35. Control with external PC New ! Enlarged operating features • Temperature programs with up to 5 steps • Control of the turntable • Real-time Display of sample temperature (Maximum) • Documentation of all digestion data (temperature curve, date, time, program etc.) • Comments

  36. Control with external PC New ! System requirements • 500 MHz Pentium processor • Windows® 2000, XP, NT or 98 • untaken serial interface COM1 or COM2

  37. Control with external PC New ! Microwave power Set temperature profile Sample temperature

  38. Accessory • Unit for sample concentration

  39. Cost-Benefit Analysis Avoiding subsequent costs through innovative instrument concept • Pure TFM-vessels few consumables (rupture discs, lids) extremly long service life, mostly longer than 5 years • Sensor technology no consumables like sensors, seals etc. Example for 2000-3000 digestions per year: • 100 rupture disc + 50 lids per year 168.- € + 680.-€ = 848.- € Example (competition): • Set of pressure jacket, liner and lid per year 10x ca. 425.- € = 4,250.- € (plus rupture discs and lids) You save approx. 3,400.- € per Year

  40. Accessory - Subboiling • Subboiling BSB 939-IR • Contact-free infrared heating • Completely made of TFM and PFA Vol. Time Water 1.8 l 24 h HNO3 1.2 l 24 h HCl 1.1 l 24 h HF 1.0 l 24 h

  41. Accessories - Subboiling • HF-purity starting with HF p.a. • Concentrations in µg/l (=ppb) Ag <0.05 Al 0.2 As <0.05 Au <0.05 Ba <0.05 Be <0.1 Bi <0.05 Ca 0.1 Cd <0.05 Co <0.05 Cr <0.05 Cu <0.05 Fe 0.25 Ga <0.05 Ge 0.4 In <0.05 K 0.6 Li <0.05 Mg 0.08 Mn <0.05 Mo <0.05 Na 0.6 Ni 0.3 Pb <0.05 Sb <0.05 Sn <0.05 Sr <0.05 Ti <0.1 V <0.05 Zn <0.05

  42. Service • Accredited application laboratory EN ISO/IEC17025:2000 • Collection of applications • Work-Shops and personally demonstrations • Specifically trained dealers and service technicians • Costumised solutions • Quality management system EN ISO 9001:2000

  43. Your Benefit • Simpliest handling of vesselsNo connection of sensors Simple vessels, made of only few parts • Wide selection of different pressure vessels • High sample throughput (up to 24 samples per run) • Permanent closed vesselsNo loss of volatile elements • Temperature control of all samples • Reproducable digestions through temperature-control system • Very simple, self-explaining operation • Massive, durable pressure vessels made of TFM • Inexpensive

  44. REALIZING YOUR IDEAS Many thanks for your attention!

More Related