1 / 44

Metalwork

JF 2007. Metalwork. Lathe . JF 2007. The Lathe. Click on an area to start questions. 3 Jaw Chuck Safety. Tool post. 3 Jaw Chuck. Tail stock 1. Tail stock 2. Head stock. Saddle. How to centre the cutting tool. How to face off your work.

alohilani
Download Presentation

Metalwork

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. JF 2007 Metalwork Lathe

  2. JF 2007 The Lathe Click on an area to start questions. 3 Jaw Chuck Safety Tool post 3 Jaw Chuck Tail stock 1 Tail stock 2 Head stock Saddle How to centre the cutting tool How to face off your work Tools for the lathe. Click on tool for question.

  3. JF 2007 3 Jaw Chuck Safety 1 Which 1 of the following is a safety requirement when using a 3 jaw chuck? • Make sure that work piece is secure. 2. Ensure that you are using the correct metal for the work. 3. The compound slide set to the correct angle

  4. JF 2007 Your answer is- WRONG • Sorry try again just click on the arrow

  5. JF 2007 Your answer is- CORRECT • Well done try another area of the lathe!! Just click the arrow

  6. JF 2007 3 Jaw Chuck Point out the tool that is used to secure your work piece in the 3 jaw chuck. • Chuck key. 2. Parting off tool. 3. Centre drill 4. Outside callipers

  7. JF 2007 Your answer is- WRONG • Sorry try again just click on the arrow

  8. JF 2007 Head Stock The head stock contains the gears to make the chuck revolve. State another 2 functions of the head stock 1. To control the angle the metal is set at. 2. To control the direction of the chuck. 3. To hold the lathe tool. 4. To reduce the diameter of the metal. 5. To control the speed of the chuck. 6. For drilling holes.

  9. JF 2007 Your answer is- WRONG • Sorry try again just click on the arrow

  10. JF 2007 Your answer is- CORRECT Now see if you can find the 2nd answer! 1. To control the angle the metal is set at. 2. To hold the lathe tool. 3. To reduce the diameter of the metal. 4. To control the speed of the chuck. 5. For drilling holes.

  11. JF 2007 Your answer is- CORRECT Now see if you can find the 2nd answer! 1. To control the angle the metal is set at. 2. To control the direction of the chuck. 3. To hold the lathe tool. 4. To reduce the diameter of the metal. 5. For drilling holes.

  12. JF 2007 Your answer is- WRONG • Sorry try again just click on the arrow

  13. JF 2007 Your answer is- WRONG • Sorry try again just click on the arrow

  14. JF 2007 Tool Post What type of tools would be placed on a tool post? 1. Centre drills, twist drills 2. Revolving centre, half centre and face plates. 3. Knife, round nose, parting, form and knurling tools. 4. Taps and dies.

  15. JF 2007 Your answer is- WRONG • Sorry try again just click on the arrow

  16. JF 2007 Tail stock 1 Tail stocks use a revolving centre/ half centre to help hold a long work piece in place. What else can they be used for? 1. To help with the tapering process. 2. Can hold centre drills and twist drills. 3. Helps cutting with a parting off tool. 4. Helps to measure the diameter of the work piece.

  17. JF 2007 Your answer is- WRONG • Sorry try again just click on the arrow

  18. JF 2007 Tail stock 2 A chuck can be mounted onto the tail stock, what is the name of this chuck? 1. Morton chuck. 2. Chuck key. 3. Quick realise chuck. 4. Jacob’s chuck.

  19. JF 2007 Your answer is- WRONG • Sorry try again just click on the arrow

  20. JF 2007 Tools Chose 1 of the following that you think is the tool that is shown here. 1. Parting off tool. 2. Twist drill 3. Revolving centre. 3 Jaw chuck.

  21. JF 2007 Your answer is- WRONG • Sorry try again just click on the arrow

  22. JF 2007 Tools Look at this picture. A work piece is being removed from a round brass bar. Name the lathe tool used in this process. 1. Round nose tool. 2. Parting off tool. 3. Form tool. 4. Knife tool.

  23. JF 2007 Tools This tool is used to put a diamond shape pattern into metal to provide a grip. What is the name of the tool. 1. Micrometer. 2. Die. 3. Half centre. 4. Knurling tool.

  24. JF 2007 Tools Look at the picture of the drill. Point out what type of drill this is. 1. Centre drill. 2. Twist drill. 3. Masonry drill 4. Hand drill

  25. JF 2007 Saddle Name 3 component parts on the saddle of the lathe. 1. Compound slide. 2. Head stock. 3. Cross slide. 4. Tail stock. 5. 3 Jaw chuck. 6. Revolving centre 7. Tool post.

  26. JF 2007 Your answer is- WRONG • Sorry try again just click on the arrow

  27. JF 2007 Saddle Name 3 component parts on the saddle of the lathe. 1. Compound slide. 2. Head stock. 3. Cross slide. 4. Tail stock. 5. 3 Jaw chuck. 6. Revolving centre

  28. JF 2007 Your answer is- WRONG • Sorry try again just click on the arrow

  29. JF 2007 Saddle Name 3 component parts on the saddle of the lathe. 1. Compound slide. 2. Head stock. 4. Tail stock. 5. 3 Jaw chuck. 6. Revolving centre

  30. JF 2007 Your answer is- WRONG • Sorry try again just click on the arrow

  31. JF 2007 Saddle Name 3 component parts on the saddle of the lathe. 1. Head stock. 2. Cross slide. 3. Tail stock. 4. 3 Jaw chuck. 5. Revolving centre

  32. JF 2007 Your answer is- WRONG • Sorry try again just click on the arrow

  33. JF 2007 Saddle Name 3 component parts on the saddle of the lathe. 1. Compound slide. 2. Head stock. 3. Tail stock. 4. 3 Jaw chuck. 5. Revolving centre 6. Tool post.

  34. JF 2007 Your answer is- WRONG • Sorry try again just click on the arrow

  35. JF 2007 Saddle Name 3 component parts on the saddle of the lathe. 1. Compound slide. 2. Head stock. 3. Tail stock. 4. 3 Jaw chuck. 5. Revolving centre

  36. JF 2007 Your answer is- WRONG • Sorry try again just click on the arrow

  37. JF 2007 Saddle Name 3 component parts on the saddle of the lathe. 1. Head stock. 2. Tail stock. 3. 3 Jaw chuck. 4. Revolving centre 5. Tool post.

  38. JF 2007 Your answer is- WRONG • Sorry try again just click on the arrow

  39. JF 2007 Saddle Name 3 component parts on the saddle of the lathe. 1. Head stock. 2. Cross slide. 3. Tail stock. 4. 3 Jaw chuck. 5. Revolving centre 6. Tool post.

  40. JF 2007 Your answer is- WRONG • Sorry try again just click on the arrow

  41. JF 2007 Saddle Name 3 component parts on the saddle of the lathe. 1. Head stock. 3. Tail stock. 4. 3 Jaw chuck. 5. Revolving centre 6. Tool post.

  42. JF 2007 Your answer is- WRONG • Sorry try again just click on the arrow

  43. JF 2007 Saddle Name 3 component parts on the saddle of the lathe. 1. Head stock. 2. Cross slide. 3. Tail stock. 4. 3 Jaw chuck. 5. Revolving centre

  44. JF 2007 Your answer is- WRONG • Sorry try again just click on the arrow

More Related