1 / 15

Investigating Catalase

Investigating Catalase. Topic 3 IB Internal Assessment. Background. Catalase is an enzyme found in almost every type of living tissue Catalase catalyses the following reaction: Hydrogen peroxide water + oxygen. catalase. Method.

angus
Download Presentation

Investigating Catalase

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Investigating Catalase Topic 3 IB Internal Assessment

  2. Background • Catalase is an enzyme found in almost every type of living tissue • Catalase catalyses the following reaction: Hydrogen peroxide water + oxygen catalase

  3. Method • Stations will be set up and you need to move around practicing the different techniques. • You are also encouraged to make notes on how each technique could be adapted for internal assessment. • The following lesson will be spent brainstorming variables as a class that could affect the rate of a reaction of an enzyme. • You will then instructed to design and carry out an experiment based on one of the variables they had listed as a class or anything else you are interested in investigating.

  4. Remember!! • REMEMBER: A CATALYST is a substance that lowers the activation energy required for a chemical reaction, and therefore increases the rate of the reaction without being used up in the process. • CATALASE is an enzyme, a biological (organic) catalyst. • Hydrogen peroxide is the substrate for catalase.

  5. The enzymes available today are as follows: • Chicken liver (whole) • Potato (whole) • Potato enzyme extract prepared as followed: • 50g of peeled potato was mixed with 50 ml cold distilled water and crushed ice and homogenized in a blender for 30 seconds. • This extract was filtered through cheesecloth and cold distilled water was added to a total volume of 100 ml. • Extract concentration is arbitrarily set at 100 units/ml. • ENZYME SHOULD BE KEPT ON ICE AT ALL TIMES!!

  6. Technique 1: Filter Disc Method • The system used in this technique consists of a filter paper disc which is coated with the enzyme and then added to a vial of substrate (hydrogen peroxide). • As the catalyst breaks down the hydrogen peroxide into water and oxygen gas, the bubbles of oxygen collect underneath the filter paper disc and make it rise to the surface of the hydrogen peroxide. • The time it takes for the filter to rise is an indication of the rate of enzyme activity. • Cut a small (1cm-ish X 1cm-ish) square out of filter paper. • Using forceps, dip the filter paper square into the enzyme solution, then remove it and drain it on a paper towel. • Pour hydrogen peroxide into the plastic vial. • Using the forceps, put the filter paper disc into the bottom of the vial of hydrogen peroxide. • Time how long it takes the filter paper disc to rise to the surface. • Calculate the rate of enzyme activity (rate = depth of hydrogen peroxide in mm)/time in sec). • Create a data table to record the distance, time and rate using the filter disc method.

  7. Technique 2:Bubble Height Method • The system used in this technique consists of a graduated cylinder with catalasesolution in which you add the substrate (hydrogen peroxide). • As the catalyst breaks down the hydrogen peroxide into water and oxygen gas, bubbles of oxygen gas form in the cylinder. These mix with detergent to create foam • The time it takes for the bubbles to rise is an indication of the rate of enzyme activity. • Place enzyme solution in a graduated cylinder to a depth of about 5 cm. • Add 10 mL hydrogen peroxide. And 2 ml detergent • Stir the cylinder quickly to mix the pulp and the hydrogen peroxide. • Note the time that foam begins to form. • After 1 min, measure the height of the foam (from the top of the liquid to the top of the foam) • Calculate the rate of enzyme activity (rate = height of foam in mm)/time in sec). • Create a data table to record the height, time and rate using the bubble height method

  8. Technique 3: Oxygen Concentration Sensor • Connect the Oxygen Gas Sensor to the computer interface. Prepare the computer for data collection by opening the file “06A Enzyme (O2)” from the Biology with Vernier folder of Logger Pro. • Initiate the enzyme catalyzed reaction. • Fill a test tube with 5 mL of H2O2. • Using a clean dropper pipette, add 5 drops of enzyme suspension to a test tube. • Begin timing with a stopwatch. • Cover the opening of the test tube with a finger and gently invert the test tube two times. • Pour the contents of the test tube into a clean 250 mL Nalgene bottle. • Place the O2 Gas Sensor into the bottle as shown in above. Gently push the sensor down into the bottle until it stops. The sensor is designed to seal the bottle without the need for unnecessary force. • When 30 seconds has passed, clickto begin data collection. • When data collection has finished, remove the O2 gas sensor from the Nalgene bottle. Rinse the bottle with water and dry with a paper towel. • Click on the Linear Fit button. A best-fit linear regression line will be shown. • In a data table, record the value of the slope, m, as the rate of the reaction.

  9. Technique 4: Oxygen Gas Collecting Method • Set up your equipment according to the diagram . • Fill the 100ml graduated cylinder with water to the very top so there is no space at the top for bubbles to form. • Invert the cylinder keeping the open end submersed in the large beaker of water. You must take care not to trap any bubbles in the cylinder. • Add about 10 ml hydrogen peroxide to a small test-tube. • Add 5 ml catalase extract and quickly stopper the test-tube, swirl it once to mix the contents, and place the tubing leading from the stopper beneath an inverted, water-filled graduated cylinder. • Record the volume of gas produced after 5 minutes. • Calculate the rate of enzyme activity (rate = volume of oxygen gas release in ml)/time in sec). • Create a data table in your lab book to record the volume, time and rate using the bubble height method.

  10. Class brainstorm • Factors that affect enzyme reactions…..?

  11. Variables • What is the independent variable? -what are you changing? • What is the dependant variable? -what are you measuring? What are the controlled variables? -what are you keeping the same?

  12. Results • How will you collect your raw data? -make sure you have table drawn with sensible headings and units • How will you present your data? -what kind of graph would be appropriate?

  13. Evaluation • Your next IA will be investigating the following question: “Investigate a factor that affects the rate of reaction of catalase” • How could you carry it out to an IB standard?

  14. Things to think about: • What sources of enzyme will you use? • How will you measure the rate of reaction? • How will you process the results?

  15. Double period data processing

More Related