1 / 32

Fuel Injection System

Fuel Injection System. Fuel Injection System. Uses pressure (not Vacuum) from an electrical pump to spray fuel into the intake manifold. Provides the engine with proper air-fuel ratio (14.7 : 1). Fuel Injection System. Advantages. Improved Atomization. Better fuel flow.

aolani
Download Presentation

Fuel Injection System

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Fuel Injection System

  2. Fuel Injection System • Uses pressure (not Vacuum) from an • electrical pump to spray fuel into the • intake manifold. • Provides the engine with proper • air-fuel ratio (14.7 : 1)

  3. Fuel Injection System Advantages • Improved Atomization • Better fuel flow • Smoother idle • Improved fuel economy • Lower emissions • Better cold weather drivability • Increased engine power • Simpler

  4. Fuel Injection System Atmospheric Pressure • Pressure formed by the air • surrounding the earth. • Atmospheric pressure is 14.7psi • at sea level. • Any space with less than 14.7psi • at sea level has vacuum. • Engine acts as a vacuum pump, • producing vacuum in the intake • manifold.

  5. Fuel Injection System Engine Throttle Valve • Controls air flow and gasoline to power engine. • When butterfly valve is closed it restricts air-flow and the • resulting flow of fuel into the engine. • When accelerator is pressed, the air-flow is increased in the • intake manifold. • Engine sensors detect the resulting changes and increase fuel • flow through the injectors.

  6. Fuel Injection System Electronic Fuel Injection uses various engine sensors and control module to regulate the opening and closing of injector valve. • Fuel delivery system • Air induction system • Sensor system • Computer control system

  7. Fuel Delivery system • Electrical Fuel Pump draws fuel from • tank and forces it into the regulator. • Pressure Regulator controls the amount • of pressure that enters the injector and any • extra fuel is returned to the fuel tank. • Fuel Injector is simply a coil or solenoid • operated valve. • Spring pressure holds the injector closed. • When engaged, the injector sprays fuel • into the engine. Injector Pulse Width indicates the time each Injector is energized (Kept Open).

  8. Air Induction System • Air filter • Throttle valve • Sensors • Connecting ducts

  9. Sensor System • Monitors engine operating condition and reports this information • to ECM (computer). • Sensors are electrical devices that change resistance or voltage • with change in condition such as temperature, pressure and position.

  10. Computer Control System • Uses electrical data from the sensors to control the operation of • the fuel injectors. • Engine Control Module (ECM)- “Brain” of the electronic fuel • injection.

  11. Engine Sensors Oxygen Sensor measures the oxygen content in engine exhaust. • Mounted on the exhaust system before the • catalytic converter. • Voltage out-put of O2 sensor changes with • the change in oxygen content of exhaust. • Lean mixture decreases the voltage. • Rich mixture increases the voltage. • Signal is sent to ECM and the ECM changes the time that an injector • is open or close.

  12. Engine Sensors Open Loop • When the electronic injection system doesn’t use the input from • the engine exhaust. • System operates on information stored in the computer (PROM). • Computer ignores the sensors when the engine is cold. Closed Loop • Ones engine reaches the operating temperature, computer uses • information from oxygen sensor and the other sensors.

  13. Engine Sensors Manifold Absolute Pressure Sensor (MAP) • Measures the pressure, or vacuum inside • the engine intake manifold. • Manifold pressure = Engine load • High pressure (low intake vacuum) = • High load = Rich mixture • Low pressure (high intake vacuum) = • Little load = Lean mixture • Computer senses the change in resistance • and alters the fuel mixture.

  14. Engine Sensors Throttle Position Sensor (TPS) • Variable resister connected to the • throttle plate. • Change in throttle angle = • change in resistance. • Based on the resistance, ECM • richens or leans the mixture.

  15. Engine Sensors Engine Temperature Sensor • Monitors the operating temperature of the engine. • Exposed to engine coolant. • Engine cold = Low Resistance = Rich Mixture • Engine Hot = High Resistance = Lean Mixture.

  16. Engine Sensors Mass Air Flow Sensor (MAF) • Measures the amount of outside air entering the engine. • Contains an air flap or door that operates a variable resistor. • Helps computer to determine how much fuel is needed.

  17. Engine Sensors Inlet Air Temperature Sensor • Measures the temperature of air entering the engine. • Cold air (more dense) = More fuel for proper AF ratio.

  18. Engine Sensors Crankshaft Position Sensor • Detects engine speed. • Changes injector timing and duration. • Higher engine speed = More fuel

  19. Engine Sensors

  20. Engine Idle Speed Control Fast Idle Thermo Valve • Thermo wax plunger expands • and shrinks as the engine • warms up or cools down. • The thermo valve opens when cold to allow air to by-pass • the throttle valve. • This extra air increases engine idle speed to prevent cold engine • stalling.

  21. Engine Idle Speed Control Idle Air Control Motor (IAC) • Computer opens the valve when temperature sensor signals • a cold engine. • Open = More Air = Increased Idle Speed.

  22. Throttle Body Injection • Uses one or two injectors. • Injectors (pulse) spray fuel into the • top of throttle body air horn. • Atomized fuel mixes with air and • drawn into the engine. • Fuel pressure regulator is spring loaded • and is part of the housing.

  23. EFI EFI Multi port Injection System • Injector is pressed into the runner(Port) • in the intake manifold. • Injector sprays towards an engine • intake valve. EFI Direct fuel Injection System • Injectors are pressed into the • combustion chamber and spray fuel • directly into the combustion chamber.

  24. Fuel Injection Diagnosis ***Do not be confused with ignition or engine mechanical problems. • Fuel leaks. • Vacuum leaks. • Kinked lines. • Sensor problems. • Loose or corroded electrical connections. ***Do not disconnect EFI harness terminal when ignition in “on” position.

  25. Diagnosis OBD (On Board Diagnostics) & OBD II • Most EFI systems have on-board diagnostic abilities. • ECM can detect and record possible faults. • MIL (Malfunction Indicator Light) in the dash-board glows when • any abnormality is sensed. • Scan tool will find and display many problems. • Always scan for trouble codes before attempting other diagnostic • procedures or disconnecting the battery (will clear codes).

  26. Diagnosis Pressure Regulator Testing ***Caution – Relieve fuel pressure (up to 60psi)before disconnecting line. • Bleed Relief Valve or Fuse • Check fuel pressure with fuel pressure gauge • and match readings against the specs. • Fuel Pressure Too Low Check clogged fuel filter or bad electric pump. • Fuel Pressure Too High Usually bad pressure regulator. Maximum Fuel Pressure Test • Pinch the return line with engine running (line with smaller diameter) • Check the gauge, if pressure too low, Fuel Pump, not the pressure • regulator is at fault.

  27. Diagnosis Injector Testing Bad injector can cause • Rough Idle • Hard Starting • Poor Fuel Economy • Engine Miss Leaky Injectors will richen the fuel mixture. • FAIR  -  but weak • 2. BAD  -  split spray pattern • 3. BAD  -  split spray pattern • BAD  -  jetting on left side • GOOD • 6. BAD  -  feathering at top of spray Dirty Injectors restricts the air- flow, causing a lean mixture. Inoperative EFI Injectors no action (Miss Fire)

  28. TBI Diagnosis • Check Pressure. • Fuel spray pattern can be seen into the horn. • If current and fuel pressure present, injector may be bad. • Regulator can be taken apart (GM). • Broke spring or bad diaphragm.

  29. Multi port Diagnosis • Listen for “clicking” sound at each injector with • a stethoscope. • Locate the bad injector. • Using an ohm meter check for resistance • across coil and short to ground. Infinite Resistance=Open coil Zero resistance to ground = shorted.

  30. Diagnosis Injector noid light • Special test lights to check EFI feed circuit. • Injector cleaning kit can clean partially clogged injectors. ***caution – Some manufacturers do not recommend cleaning injectors (Pintel Type)

  31. Oxygen Sensor Diagnosis • O2 voltage cycles from about 0.2 – 0.8 Volts. • 0.2 volts = lean AFR • 0.8 volts = Rich AFR • Simulate LEAN condition by pulling off a large vacuum hose. • (0.2 – 0.3 volts) • Simulate RICH condition by injecting propane into the air intake. • (0.7 – 0.8 volts)

  32. Temperature Sensors • Resistance can be checked by dipping it in hot Vs cold water. Cold = Low resistance. Hot = High resistance.

More Related