1 / 25

Symbolization

FOR357/557. Symbolization. The key to effective mapping. Overview. Introduction to module 2 Concept of layers Brewer’s on-line help Examples. Module 2 Lesson 1. Working with Symbols Types of symbols Choosing symbols Labeling map features Display and label map features. Exercise.

aquila
Download Presentation

Symbolization

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. FOR357/557 Symbolization The key to effective mapping

  2. Overview • Introduction to module 2 • Concept of layers • Brewer’s on-line help • Examples

  3. Module 2 Lesson 1 • Working with Symbols • Types of symbols • Choosing symbols • Labeling map features • Display and label map features Exercise

  4. Lines Polys Points Types of Symbols

  5. Labeling feaures • Features can be labeled with data in the attribute file • Set up in Layer Properties • Turn on and off with right-click on layer

  6. Module 2 Lesson 2 • Symbolizing features based on attributes • Drawing features to show categories • Drawing features to show quantities • Display features with categories & quantities

  7. Categorical Quantities Quantities? Categories? • Data types: • Nominal • Ordinal • Interval • Ratio

  8. Module 2 Lesson 3 • Classifying data • Grouping attribute values into classes • Deciding which classification scheme to use • Explore methods of classifying data • (or – how to lie with maps!)

  9. Classify? • Place data into groups • 1 2 3 4 5 6 7 8 9 • 0 1 2 • By doing this you are saying that: • The differences between values within a group are not significant • Or • Even if they are I can’t display them effectively

  10. Purpose of Classification • The most important process involved in producing a choropleth map • Values are grouped into classes to simplify and generalize mapped patterns for the reader. • Although some details may be lost in classification, the results allow more information to be transmitted. • Minimize the differences within each class and maximize differences between classes. • The spatial pattern shown by choropleth map can be greatly altered by changing the classification method.

  11. Number of classes • The number of classes determines how detailed the mapped distribution will be. • The minimum number of classes is normally 4. • The maximum number is eleven (or 12). • The optimum number is 5 or 6. • On a monochromatic map (single color ramp) viewers cannot perceive more than 8 classes

  12. The Symbology Tab • There are actually several ways to classify the data • Natural breaks • Equal interval • Quantile • Manual • This can get quite messy • AND IT DOES NOT CHANGE THE DATA!

  13. Module 2 Lesson 4 • Mapping density and proportion • Mapping density using attribute values • Mapping density visually • Mapping proportion • Map density and attribute relationships

  14. So • There are 4 exercises • This is harder than Module 1 and you have to pay attention • But it is basic theory related to communicating with maps

  15. Overview • Introduction to module 2 • Concept of layers • Brewer’s on-line help • Examples

  16. Layers • A confusing term since it is used in several ways • GIS professionals have used the term to refer to the layers of data in the layered structure of gis data….

  17. Skewer oflocation Streams Power lines Landuse Roads Layers • A confusing term since it is used in several ways • GIS professionals have used the term to refer to the layers of data in the layered structure of gis data….

  18. Layers • A confusing term since it is used in several ways • GIS professionals have used the term to refer to the layers of data in the layered structure of gis data…. • It also has a very specific and important meaning in ArcGIS

  19. Layers in ArcGIS • When you create a symbology it is saved in the map document so that when you reopen the features have he same symbology • What if you would like to use the same symbology in different maps? • Layer Files to the rescue.

  20. Layer Files • Save the link to the data • And • The symbology used • Then you can add the layer file to any map using that data • If it can’t find the data it will not work!

  21. From Help • In ArcGIS, a reference to a data source, such as a shapefile, that defines how the data should be displayed on a map. • Layers can be stored in map documents (.mxd) or saved individually as layer files (.lyr). • Layers are conceptually similar to themes in ArcView 3.x that have legend files (.avl)

  22. Overview • Introduction to module 2 • Concept of layers • Classification • Brewer’s on-line help • Examples

  23. Overview • Introduction to module 2 • Concept of layers • Brewer’s on-line help • Examples

  24. Summary • ArcGIS, as you will see, contains hundreds of symbols for points and lines • And hundreds of outlines and fills for polys • Keeping track of where they are is a problem

  25. Summary • Classification is the trickiest part of this module • And probably the most important • So read and do the exercises carefully -- and keep notes • And, as usual, there are multiple ways of doing things

More Related