1 / 15

Root locus

Root locus. A technique enabling you to see how close-loop poles would vary if a parameter in the system is varied Can be used to design controllers or tuning controller parameters so as to move the dominant poles into the desired region.

argyle
Download Presentation

Root locus

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Root locus • A technique enabling you to see how close-loop poles would vary if a parameter in the system is varied • Can be used to design controllers or tuning controller parameters so as to move the dominant poles into the desired region

  2. Recall: step response specs are directly related to pole locations • Let p=-s+jwd • ts proportional to 1/s • Mp determined by exp(-ps/wd) • tr proportional to 1/|p| • It would be really nice if we can • Predict how the poles move when we tweak a system parameter • Systematically drive the poles to the desired region corresponding to desired step response specs

  3. Root Locus k s(s+a) y e r Example: + - Two parameters: k and a. would like to know how they affect poles

  4. The root locus technique • Obtain closed-loop TF and char eq d(s) = 0 • Rearrange terms in d(s) by collecting those proportional to parameter of interest, and those not; then divide eq by terms not proportional to para. to get this is called the root locus equation • Roots of n1(s) are called open-loop zeros, mark them with “o” in s-plane; roots of d1(s) are called open-loop poles, mark them with “x” in s-plane

  5. The “o” and “x” marks falling on the real axis divide the real axis into several segments. If a segment has an odd total number of “o” and/or “x” marks to its right, then n1(s)/d1(s) evaluated on this segment will be negative real, and there is possible k to make the root locus equation hold. So this segment is part of the root locus. High light it. If a segment has an even total number of marks, then it’s not part of root locus. For the high lighted segments, mark out going arrows near a pole, and incoming arrow near a zero.

  6. Let n=#poles=order of system, m=#zeros. One root locus branch comes out of each pole, so there are a total of n branches. M branches goes to the m finite zeros, leaving n-m branches going to infinity along some asymptotes. The asymptotes have angles (–p +2lp)/(n-m). The asymptotes intersect on the real axis at:

  7. Imaginary axis crossing • Go back to original char eq d(s)=0 • Use Routh criteria special case 1 • Find k value to make a whole row = 0 • The roots of the auxiliary equation are on jw axis, give oscillation frequency, are the jw axis crossing points of the root locus • When two branches meet and split, you have breakaway points. They are double roots. d(s)=0 and d’(s) =0 also. Use this to solve for s and k. • Use matlab command to get additional details of root locus • Let num = n1(s)’s coeff vector • Let den = d1(s)’s coeef vector • rlocus(num,den) draws locus for the root locus equation • Should be able to do first 7 steps by hand.

More Related