1 / 10

Modem

Modem. acronym for mo dulator- dem odulator converts a series of binary voltage pulses into an analog signal the receiving modem translates the analog signal back into digital data. Date Flow: Simplex. only transmit in one direction. One way. Monitor. Computer. Data Flow: Half Duplex.

atalo
Download Presentation

Modem

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Modem • acronym for modulator-demodulator • converts a series of binary voltage pulses into an analog signal • the receiving modem translates the analog signal back into digital data

  2. Date Flow: Simplex • only transmit in one direction One way Monitor Computer

  3. Data Flow: Half Duplex • data may travel in both directions, but only in one direction at a time • non-simultaneous two-way communication • computers use control signals to negotiate when to send and when to receive

  4. Half Duplex

  5. Data Flow: Full Duplex • complete two-way simultaneous transmission • faster than half-duplex communication because no turnaround time is needed

  6. Used for connections between computer and modems, among other things 25-pin connector with a specific arrangement of leads computer usually has male DB25 connectors while modems are female In practice, fewer than 25 wires are generally used in applications RS-232C

  7. DB-25 Female DB-25 Male RS-232 DB-25 Connectors

  8. RS-232 DB-25 Pinouts

  9. Limited RS-232 RS-232 DB-9 Connectors

  10. MODEM COMMANDSMEMORIZE THESE! • AT- PROCEDES ALL MODEM COMMANDS • ATDT- DIAL PHONE # USING TOUCH TONE • ATDP- DIAL PHONE # USING PULSE DIALING • ATA- ANSWER AN INCOMING CALL • ATHO- HANG UP IMMEDIATELY • AT&F- RESET MODEM TO FACTORY SETTING • ATZ- RESET TO POWER UP SETTINGS • *70- CANCEL CALL WAITING

More Related