1 / 13

Modifying a Paintball Regulator for BBIQ

Modifying a Paintball Regulator for BBIQ. The Necessary Stuff. Sourcing Parts and Supplies is an Important Engineering Skill. Integrated Regulator and Tank. Inherently Safer Than Remote Regulators. High Pressure Circuit Lines are not required. Exposure to Catastrophic Damage is Reduced.

baeddan
Download Presentation

Modifying a Paintball Regulator for BBIQ

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Modifying a Paintball Regulator for BBIQ

  2. The Necessary Stuff Sourcing Parts and Supplies is an Important Engineering Skill

  3. Integrated Regulator and Tank Inherently Safer Than Remote Regulators High Pressure Circuit Lines are not required Exposure to Catastrophic Damage is Reduced

  4. The Regulator Should Have These Features High and Low Pressure Burst Discs High and Low Pressure Gages ¼” QD Fill Port ¼” Low Pressure Port Adjustable and Lockable Pressure Setting

  5. Paintball Regulator Parts are Readily Available Easily Repaired Fast Delivery Simple Construction Affordable

  6. BBIQ Technical Regulations Require Additional Modifications Manual Low Pressure On/Off Valve Low Pressure System Bleed Valve Overpressure Relief Valve

  7. Swagelok Corporation Offers Two Necessary Components Note: All Components must be rated at their working pressure or above.

  8. This Swagelok Valve has Dual Functionality On/Off Valve Rated at 3000 psi Vents the Low Pressure Circuit as it Closes

  9. SMC Corporation Makes a Miniature Low Pressure Gage 0-300 psi Lightweight Rugged

  10. SMC Corporation Also Manufactures One Touch Fittings Rapid assembly and disassembly Light Weight and Rugged Extremely Easy to Use

  11. Other Fittings are Required to “Set-up” a BBIQ Regulator “T” Fittings Shown on the Right Union Fittings Nipples

  12. SMC Corporation One Touch Fitting 3/8” x 1/8” NPT Swagelok On/Off/Bleed Valve 1/8” NPT 90 Degree Elbow 1/8” NPT Nipples 1/8” NPT “T” Fitting 1/8” NPT Nipple ¼” x 1/8” NPT Reducer ¼” NPT Union Swagelok Adjustable Pressure Relief

  13. Time to Learn by Doing Time to Create a BBIQ Pneumatic System It’s Educational It’s exciting It’s What Engineers Do for a Living

More Related