1 / 28

Electrical Data Transmission on Flex Cables at 320 Mbps

Electrical Data Transmission on Flex Cables at 320 Mbps. Peter Manning, Vitaliy Fadeyev, Jason Nielsen Santa Cruz Institute for Particle Physics University of California, Santa Cruz. Options and Issues with Optical Transmission. Jingbo Ye et al SMU. ATLAS SCT Upgrade meeting at UCSC

barny
Download Presentation

Electrical Data Transmission on Flex Cables at 320 Mbps

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Electrical Data Transmissionon Flex Cables at 320 Mbps Peter Manning, Vitaliy Fadeyev, Jason Nielsen Santa Cruz Institute for Particle Physics University of California, Santa Cruz Options and Issues with Optical Transmission Jingbo Ye et al SMU ATLAS SCT Upgrade meeting at UCSC 12 August 2008

  2. Outline • Investigating LVDS transmission on flex cable stripline at speeds up to 320 Mbps over 60-70 cm • Results at waveform (eye diagram) level currently. • Investigation of different loads and trace geometry. • Making modeling more realistic: BERT and latching circuits • Optical transmission work: • Demo link status • LOC2 status • Fiber irradiation tests V. Fadeyev (UCSC)

  3. Testing Hardware Setup Xilinx ML-310 (Virtex 2 Pro) National DS25BR100EVK V. Fadeyev (UCSC)

  4. Prototype Stave Cable • Thanks to Carl, an early version of SCT stave. • 50 cm long stripline • Taps every 10 cm Shields top and bottom bonded together Bond to straight traces on cable edge V. Fadeyev (UCSC)

  5. Assumptions • Recall from architecture: we are planning for point-to-point transmission for data, and multiple “tap points” for the clock distribution. • Investigation with DPO scope (500 MHz) V. Fadeyev (UCSC)

  6. Investigated Trace geometry effects The studied cable has a several types of striplines. V. Fadeyev (UCSC)

  7. Eye Diagram Examples Clock at the receiver with 4 x 2pF loads along the stripline Eye diagram at the receiver with 4 x SN65LVDS100 receiver loads along the stripline V. Fadeyev (UCSC)

  8. Cross-Talk Drive differential pair with 100 MHz clock (blue) Measure cross-talk signal on adjacent terminated trace (orange) separated by 100 microns (same as stripline width) At source end At termination end Note different scales: cross-talk amplitude is less than 5% . V. Fadeyev (UCSC)

  9. BERT Development Need an error rate tester for quantitative assessment of transmission quality. Have a basic structure for bit-level investigation; studying phase control. Data in Inv. Data in (=>360 deg. delay) Error out Error out 10101…stream at 280 MHz 10101…stream at 320 MHz V. Fadeyev (UCSC)

  10. Hybrid “Models” Looked at a couple of circuits that could latch the data wrt input clock, thereby modeling the data acceptance by module (and stave?) controllers. OnSemi’s DFF MC10EP52 OnSemi’s DFF NBSG53A V. Fadeyev (UCSC)

  11. Conclusions • Indications for satisfactory performance for several variations of stripline geometry. • For multi-tap scenario, the performance depends on “tap” loads. • Cross-talk between nearby traces is small. • Making progress with BERT and hybrid “models” V. Fadeyev (UCSC)

  12. Next Steps and Time Table • Finish BERT firmware development, measure error rates ~3 months • Follow up with software modeling ~2months • Instrument Carl’s long ladder and measure the performance (place multiple hybrids or “models” with realistic multi-tap clock distribution etc and measure individual line error rates) ~3 months To complete these near-term tasks we’d need 6-9 months, depending on degree of parallelism practically achievable. • Custom-made cables with proper routing? • Serial powering and effect of balancing the protocols? V. Fadeyev (UCSC)

  13. Demo Link and the LOC Status Report(This is a shortened version of the report. The full version is available on the meeting’s web site.) Demo Link status LOC2 status Irradiation tests on optical fiber Summary Vitaliy for the SMU team

  14. Reminder: GOL, LOC, GBT… SC H1 …. H4 H3 H2 Serialized data • It is envisoned that at the end of the stave there is a stave controller chip which serializes the data from hybrids, accepts commands and broadcasts them (phase delayed) to module controllers, etc. There are several ASICs with overlapping functionalities: • GOL – Gygabit Optical Link (CERN), a serializer in existence. 40 MHz -> 0.8 (1.6) GHz. • GBT – Gygabit Bydirectional Trigger and data link (CERN), in development, multipurpose. >2.5 GHz data bandwidth. • LOC – Link On a Chip (SMU), in development, serializer, ~5 GHz bandwidth.

  15. Demo Link status • The idea: • Use the GOL to construct an optical link to read out the staves under development. • Provide a Giga-bit optical link that develops together with the detector and front-end ASICs. • Provide a test vehicle to study system and integration issues at an early stage. • Demo Links can be quickly constructed with LOC or GBTx when they become available in 2009/2010. • These demo links will lead a baseline design for final production, installation evaluations and will provide links for reliability studies before the production begins. • The status: • Next page. • The plan: V. Fadeyev (UCSC)

  16. The plan: • Currently layout the two interface boards. • FPGA code development when all boards are out for fabrication and assembly. • 8/25 – 9/5: debugging at SMU. • 9/10, 11: first test at LBNL. • May need a few integration tests and modifications of the interface boards. • Will provide boards to interested groups for system level studies by the end of this year. V. Fadeyev (UCSC)

  17. LOC2 status • Design status: • Currently carry out post layout simulations on key components to define the speed of LOC2. • Still in discussion with people in Inner Detector and in LAr trying to make LOC2 best fit the needs in both readout. In ID, we need to work more closely with people who develop the (supper-) module-controller to understand the input to LOC2. We may make use of the fact that the output of MC is already 8B/10B encoded to maximize the use of the bandwidth. • Current simulations show a 5 Gbps LOC2 hopeful. • Details in the following pages. • The plan: • after the status report. V. Fadeyev (UCSC)

  18. LOC2 Block diagram and challenging spots: Cntrl/Config Cntrl config Clk_ref PLL + clks 27-1 PRBS 8B/10B Comma MUX Data 16 bit Input register LVDS to LVCMOS 2:1 MUX to 8 bit 16 LVDS 10 bit Even bits shift register CML driver Serial output to Versatile Link 2:1 MUX Odd bits shift register Latch • Critical components: • PLL. VCO, the first stage divider  speed. Architecture choice: reliability, jitter, implementation. • Static D-flip-flop. The building block of the divider, and the shift register  speed. • CML driver. • Inverter: basic unit of a CMOS circuit. Study the PMOS/NMOS ratio, circuit speed. • We may move the 8B/10B encoder out of LOC2 to better interface ID and LAr. That is, • we may design dedicated interface chips for LOC’s applications. This is in discussion right • now and will be finalized soon. V. Fadeyev (UCSC)

  19. LOC2 work plan, near future • Finalize the structure: with 8B/10B encoder or move the encoder out. With the latter, dedicated interface chips will be designed to best cope with the input data and maximize the use of the link bandwidth. • Post layout studies on all the critical components and understand the speed of LOC2. At this moment, 5 Gbps is hopeful. • Careful studies on the PLL, mostly the RJ, or phase noise. • A design review (1st), Oct./Nov. time frame, at BNL or CERN on the critical parts. Get help from the community on things we may have overlooked, misunderstand, etc. V. Fadeyev (UCSC)

  20. LOC2 work plan, till April 2009 • After the 1st design review, we will move on to • Complete PLL and clock unit design. • Complete the serializer design. • Implement the 8B/10B and 64B/66B Encoders, or design the interface chips. • Implement the control/config unit. • Implement the CML driver. • We aim for the 2nd design review, Jan./Feb. 2009, on the whole chip or chip set. • We aim for the April 09 submission, and the tests in lab July 09. We will provide demo-link and system design document for groups that are interested in using this chip in the fall of 2009. • Full evaluation of LOC2, including irradiation tests are planned to take place in the fall of 2009. • Reference: GBTx is planned to be available end of 2009. V. Fadeyev (UCSC)

  21. Irradiation tests on optical fiber • To complete a rad-tol optical link system, one needs to identify rad-tol components such as VCSEL, fiber and PINs. This part of the work is now the Versatile Project. At SMU, we identified a 10G fiber and performed several tests on the fiber. • The report here consists: • Results from ATLAS LAr. • Narrow down to Germanium doped GRIN fiber. • Preliminary tests. V. Fadeyev (UCSC)

  22. Preliminary tests • Gamma (Co-60) and Proton (230 MeV) tests • Infinicor SX+ 50/250m/1.6mm MM. • 10G fiber from Corning. Germanium doped. • Very small light loss at low flux (dose rate). • Big loss at high flux but anneals very quickly (within 1 hour) back. Fiber under proton test V. Fadeyev (UCSC)

  23. Preliminary tests Co-60 at BNL, dose rate: 30 krad/hr. Fiber: Corning Infinicor SX+ 50/125 MM fiber, 45 m under irradiation. Total RIA: 0.04 dB/m after 1.4 Mrad. Annealing effects observed. More annealing results will follow once we get our equipment back to SMU. V. Fadeyev (UCSC)

  24. Conclusion on fiber (preliminary) • Corning Infinicor SX+ 50/125 MM fibers from different production batches, packaging companies were irradiated with gamma (Co-60) and proton (230 MeV). More tests with higher dose rate and total dose are to be carried out by Oxford group to reach 50 Mrads. • Careful data analysis, especially on annealing effects, needs to be carried out. • More tests, especially neutron or proton may be needed to study possible NIEL effect, or to confirm that the lack of it. • Preliminary results indicate that this fiber may be suitable for ID upgrade. V. Fadeyev (UCSC)

  25. Summary • The GOL based demo link will be constructed and put to use in Sept./Oct. time frame. This demo link will be used to perform many system level studies on the Giga-bit optical link. Demo links based on LOC or GBTx will follow. This exercise will lead to a baseline design for the upgrade of optical readout. • The LOC2 design is on track for a user chip in 2009. It is hopeful to achieve 5 Gbps speed. We need to work more closely with upstream ASIC developers to define the interface. • R&D work in the frame of Versatile Link project is on-going to identify components for a rad-tol optical link. At least one type of fiber (Corning Infinicor SX+ 50/125 MM ) has been tested with gamma and proton and the preliminary results indicate that this fiber may be suitable for the ID upgrade. V. Fadeyev (UCSC)

  26. Backup Slides V. Fadeyev (UCSC)

  27. Effect of the Tap Put 10 pF load at the source in two ways: 1) serially 2) via 2 cm long tap. Serial insertion With 2 cm long tap V. Fadeyev (UCSC)

  28. Eye Diagrams with 4 x 2 pF loads Worst cases are near the source (tap 1). Straight trace Zigzag trace V. Fadeyev (UCSC)

More Related