1 / 9

Home Soldering

Home Soldering. Georgia Institute of Technology. Materials - Soldering Irons – Conventional. Temperature Controlled M o re expensive but not unaffordable Power controlled Watt rating 15W about right for small electronics – even a bit hot in some cases Some are switchable

beulah
Download Presentation

Home Soldering

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Home Soldering Georgia Institute of Technology

  2. Materials - Soldering Irons – Conventional • Temperature Controlled • More expensive but not unaffordable • Power controlled • Watt rating • 15W about right for small electronics – even a bit hot in some cases • Some are switchable • Battery Powered • Allegedly about 15W effectively • Portable, no cord, light • Heat conductive tip lowers risk of burns

  3. Materials – Soldering Irons (cont.) • Cold Heat • Activated when low resistance on the tip • Very heat conductive material on the tip – runs small current until connection, then higher current • Electrical resistance of solder and tip causes heat • Different technique • Battery powered • Only hot when soldering or immediately after • Not good for desoldering • Fragile

  4. Materials – Solder – Kinds of Solder • Cores • Flux • Improves flow • Prevents Corrosion • Can form salt – “no clean” • Types • Acid • Metalworking • Can have poisonous vapors • Rosin • Common • Electronics • Water-Soluble • Environmentally responsible • Can be corrosive • Removal • More active, more salt • Easier to remove • Flux-free • Rare – mostly research, manufacturing

  5. Kinds of Solder (cont.) • Lead • Slower solidifying • Lowers melting temperature • Reliability • Poisonous • RoHS • Size • Chemical ratio • Unspecified and 60/40 or 63/37 -> likely tin / lead • Otherwise, typically not specified or materials namedbecause many other combinations exist

  6. Materials –Accessories • Grips • Soldering involves attaching two metal parts together – so there will always be 4 parts involved: • Object A • Object B • Solder • Soldering iron • Solution: stabilize at least 2 of them (or 3?) • Pliers • Chip Clips • Vice Grip • “Helping Hands”

  7. Accessories (cont.) • Surface • Sponge • Mousepad • Heat Sink / Clip • Stands • Extension cord (!) • Note: low wattage • Tips • Size/Shape • Wattage • Connection

  8. Concepts • Tinning the iron • When first using the iron or when coating is wearing off • Protects the tip from corrosion • Better heat flow • Too Much Heat • Melt the solder • May need to prepare surfaces • Result not as solid, but often good enough • Accessories • Tips • Lower Power • Electrostatic discharge • Everyone seen anti-static bags? Static + electronics = bad • Try to avoid generating it (no wool socks, etc) • Anti-static wrist straps • Don’t touch the iron! • Many irons are already grounded

  9. You can do it! • The end

More Related