Prevalent Problems With An RO System And What You Can Do About Them

1. Prevalent Problems With An RO System And What You Can Do About Them

2. The reverse osmosis filters have become very prominent in use ever since their establishment. One of the factors that made it popular among the most number of people has been the fact that these filters don’t require much maintenance. A significant task of the filters is to replace the filter cartridges after a prescribed period. Apart from that, the system plays along quite well; however, some minor problems can still arise with the system for obvious reasons. The good thing is that these issues could be quickly resolved, even at home, with essential tools. Here is a small rundown of all the common issues that arise with RO systems, and we mention its potential causes and some of the best possible solutions it has.

3. Water flowing out in a trickle Water from the mineral water plants doesn’t spurt out as it does in the case of tap water. The water filtration process usually involves various stages that make it flow slowly out the faucet. To check if the water oozes out faster than it should, try filling a jug, bottle or container for precisely 60 seconds; it should tell you the correct flow rate of the system. Noisy faucet or drain A noisy faucet or drain is one of the most common problems of an RO system. Usually, there is no such problem with the bottling water plants like RO filters, but the air gets pushed out when you install a new system or change the filter cartridges, which causes the noise. However, there is nothing to worry about, as the noise should gradually reduce in a week.

4. Water tastes bad and consists of a foul smell Water filtered from an RO water purifier usually has no detectable odours or taste. The water may have a slight earthiness in the taste at the remineralisation stage when the minerals are added back into the water, which is entirely normal. You should start getting concerned when the water begins having an unusual chemical or chlorine smell this would indicate that the filters are not working at their best.

5. What should you do about it? Replace the filters immediately when the odour and taste of the water are affected and it is inevitable after a certain period. The RO pre-filters are designed to last for upto 6-12 months; leaving them untouched for too long can cause them to get clogged, and eventually, they stop filtering water as effectively. The clogged filters could also damage the chlorine membrane due to exposure to chlorine and other chemicals. Water tasting sour or metallic Sour tasting water indicates a low pH level in the water. Typically, RO water is slightly acidic as it lacks mineral ions. But when your tap water is already sour, it passes through an RO system lowering the pH leaving the metallic taste in the water.

6. In Summary So these are some of the most common problems with the RO system that can be fixed easily; however, you always have a backup option of calling the field experts onboard to help you out. We, at bottling India, are dedicated to providing our customers with top-notch installation and maintenance service for the plant. Hand over the issues you face with your mineral water plants to the trusted people, reach out to us for any servicing and maintenance related concerns.