1 / 14

Thermocouple Applications in Pavement Systems

Thermocouple Applications in Pavement Systems. Jake Hiller Graduate Research Assistant. Presentation for CEE 398 KUC – Experiments in Structures and Materials March 6, 2002. Outline of Presentation. Background on Thermocouples Rigid Pavement Applications Flexible Pavement Applications

brody
Download Presentation

Thermocouple Applications in Pavement Systems

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Thermocouple Applications in Pavement Systems Jake Hiller Graduate Research Assistant Presentation for CEE 398 KUC – Experiments in Structures and Materials March 6, 2002

  2. Outline of Presentation • Background on Thermocouples • Rigid Pavement Applications • Flexible Pavement Applications • Summary

  3. Background on Thermocouples • Two conductor cables • Composed of metal alloys • Ends of wires are soldered to form a couple • Resistance of couple changes with temperature • Seebeck Effect – 1822 • Resistance is then correlated with temperature • Standardized correlations • Correlations can change over time (deformation, corrosion)

  4. Seebeck Effect • Discovered by Thomas Seebeck, 1822 • Electrons flow from one wire to other • Due to different energy potentials of alloys • As temperature changes, current flows • Voltage is measured between the two alloys • Small voltage (less than 10 mV)

  5. Many types of Thermocouples • Type K – cheap, general purpose • Positive 90% Ni, 10% Cr Negative 95% Ni…Al, Mn, Si • Type T – Good accuracy in pav’t temp range • Positive 100% Cu Negative 55% Cu, 45% Ni (constantan) • Low corrosion potential • Type J • Positive 100% Fe Negative 55% Cu, 45% Ni (constantan) • Type N • Positive 85% Ni…Cr, Si Negative 96% Ni… Si, etc.

  6. Temperature Limitations

  7. Thermocouples Options • Insulation/sheathing to protect from outside factors • Gage of wire is related to performance • Pre-assembled with connectors to fit thermometer • Multiple TC’s pre-assembled • Unassembled wire • Color code by type • Differs between some countries

  8. Problems with Thermocouples • Accuracy • Often between 0.5 and 2.2ºC, depending on TC type • Noise • Long leads can attract electrical signals • Already low signal from thermocouple • Thermal shunting • Heating of wire mass can affect measurements by absorbing energy • Corrosion • High alkali or water environments can modify calibration

  9. L DL Rigid Pavement Applications • Three types of thermal movements in rigid pav’ts • Curling • Thermal gradient in slab • Expansion/Contraction • Uniform temperature change • Soil frost heave • Lifting of slab due to increasing volume of underlying layers Upward curling: Top contracts relative to bottom Downward curling: Bottom contracts relative to top

  10. Calibration/Instrumentation of Thermocouples • Typically tested in hot and cold baths • Confirmation and sway in readings • Placed in two ways • Set at different depths along wooden dowel or bracket • Placed in by hand as paving is occurring (less reliable) • Minimum of 0.5” of cover needed

  11. Rigid Pavement Testing • Used in conjunction with other sensors to evaluate pavement performance • Include vibrating wire, moisture resistance sensors, psychrometers, etc. • Typically placed at either corner, edge, or middle of slabs

  12. Flexible Pavement Applications • Determination of Viscoelastic Properties • Rutting potential increases with temperature • Lower modulus - Higher deflections • Thermal Cracking • Low temperatures – thermal stresses increase • Stress can surpass tensile strength of material • Fatigue of material can also occur • Soil frost heave

  13. Flexible Pavement Applications • TC’s placed near: pressure cells, strain gages, or FWD test locations to correlate with temperature

  14. Summary • TC’s based on energy potential differences of alloys • Each TC type has distinct advantages • Type T and K most used in pav’t field testing • Accuracy is sometimes questionable • Corrosion can be a potential problem • Used in rigid pav’t to assess curling and expansion • Installed before paving typically • Used in flexible pav’t to determine seasonal variability and frost action

More Related