1 / 31

Distillation and Chromatography

Distillation and Chromatography. Objectives. Separate the components of a solution using distillation and chromatography Determine physical or chemical properties which proves separation was successful Determine Vapor Temperature variations during the distillation.

brownkevin
Download Presentation

Distillation and Chromatography

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Distillation and Chromatography

  2. Objectives • Separate the components of a solution using distillation and chromatography • Determine physical or chemical properties which proves separation was successful • Determine Vapor Temperature variations during the distillation.

  3. An Introduction to Separations

  4. What is Separation • The division of chemical mixtures into its chemical components by physical means. • A single substance that has no other substances mixing with it is called a PURE SUBSTANCE. If there is something else mixed with it, it is a mixture.

  5. Why Separations • Most Chemicals are natural products that must be separated into pure chemicals for use in industry or research.

  6. How to Separate • Separations are achieved through mostly physical means. • All chemicals have different physical characteristics. • The differences in the physical properties are exploited to separated different molecules.

  7. Example Physical Properties • Boiling point • Melting point • Charge state • Partition Coefficient • Vapor Pressure • Solubility

  8. Physical Properties of C2 Molecules

  9. Re-crystallization Selective Precipitation Solvent extraction Electrophoresis Distillation Chromatography Field Flow Fractions Super Critical Fluid Hyphenated methods Types of Separations

  10. Introduction to Chromatography

  11. The Master British biochemist Richard Synge won the 1952 Nobel Prize in chemistry. He developed partition chromatography, a technique for identifying and quantifying the component parts of such substances as proteins, carbohydrates, and nucleic acids.

  12. Elements necessary for Chromatography • Mobile Phase • Stationary Phase • Sample inlet • Detection

  13. Types of Chromatography

  14. Paper Cellulose Starch Sugars Magnesium Silicate Calcium Sulfate Silicic Acid Silica Gel Florisil Magnesium Oxide Aluminum Oxide Activated charcoal ODS Synthetic packing Types Of Adsorption Packings

  15. Thin Layer Chromatography

  16. Developing Chromatograph

  17. Liquid Column Chromatography

  18. The Packed Column

  19. High Pressure Liquid Chromatography

  20. Distillation is… • The separation and purification of a mixture of components based on the different volatilities of each component. • The volatile components are vaporized, then condensed, and collected.

  21. What is in our mixture? • Water • Ethanol • Red Dye • Blue Dye

  22. Volatility Water is less volatile than ethanol because water’s intermolecular forces are stronger than those of ethanol.

  23. Phase Equilibrium Temp vapor 80º liquid %Ethanol 83% 67% 100 50 0 %Water 17% 33% 0 50 100

  24. Modifications to Procedure • 1 ml direct pipette with pump • Small plastic beaker for density determination • Dye Mixture • Plastic graduated dropper for food dye • Ice • Large beaker for Ice Bath • Chromatography Kit • 4 vials for each component isolated

  25. Procedure modifications • Prepare a solution containing 25 % V/V Ethanol Water Solution • Volume of solution prepared should not exceed 25 % of volume of pot Flask • Determine Volume by the following Equation • Volume of Pot Flask * .25 = Total Volume of solution prepared • Using a Pipette and Balance determine the density of the solution prepared

  26. Chromatography Analysis • Wet the column using eluent which is designated as the most polar • Place the .5 ml of solution prepared into reservoir of Column Chromatography apparatus as demonstrated by Instructor • Draw into column the solution • Add the polar eluent into the column until one of the dyes can be isolated into the small vial provided

  27. Chromatography continued • Place the less polar eluent into the reservoir above the column. Draw the eluent into the column as instructed. • Isolate the second dye and place into labeled vial

  28. Distillation • Using Logger pro determine the temperature which is most constant during the distillation. Do not allow the vapor temperature to exceed 90 degrees Celsius • Test the combustibility of the solution prepared and the combustibility of the components isolated • Determine the density of the original solution and density of the separated components.

  29. Questions • Answer all questions in lab • Using the most constant temperature reading obtained during the distillation determine the % alcohol in the Vapor. • Which of the Dyes is more Polar and Attracted to the more polar Eluent

More Related