1 / 29

Week # 2 MR Chapter 2

Tutorial #2 MR # 2.1, 2.4, 2.8. To be discussed on Jan. 29, 2014. By either volunteer or class list. Week # 2 MR Chapter 2. MARTIN RHODES (2008) Introduction to Particle Technology , 2nd Edition. Publisher John Wiley & Son, Chichester, West Sussex, England. For a sphere. Stoke’s law.

bryson
Download Presentation

Week # 2 MR Chapter 2

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Tutorial #2 MR # 2.1, 2.4, 2.8. To be discussed on Jan. 29, 2014. By either volunteer or class list. Week # 2MR Chapter 2 MARTIN RHODES (2008) Introduction to Particle Technology , 2nd Edition. Publisher John Wiley & Son, Chichester, West Sussex, England.

  2. For a sphere Stoke’s law Motion of solid particles in a fluid

  3. Standard drag curve for motion of a sphere in a fluid

  4. Reynolds number ranges for single particle drag coefficient correlations At higher relative velocity, the inertia of fluid begins to dominate. Four regions are identified: Stoke’s law, intermediate, newton’s law, boundary layer separation. Table 2.1 (Schiller and Naumann (1933) : Accuracy around 7%.

  5. Single Particle Terminal Velocity

  6. Special Cases • Newton’s law region: Intermediate region:

  7. To calculate UT and x • (a) To calculate UT, for a given size x, • (b) To calculate size x, for a given UT, Independent of UT Independent of size x

  8. Particles falling under gravity through a fluid Method for estimating terminal velocity for a given size of particle and vice versa

  9. Non-spherical particles Drag coefficient CD versus Reynolds number ReP for particles of sphericity ranging from 0.125 to 1.0

  10. Effect of boundaries on terminal velocity When a particle is falling through a fluid in the presence of a solid boundary the terminal Velocity reached by the particle is less than that for an infinite fluid. Following Francis (1933), wall factor ( ) Sand particles falling from rest in air (particle density, 2600 kg/m3)

  11. Limiting particle size for Stoke’s law in water

  12. Limiting particle size for Stoke’s law in air

  13. 850

  14. Where the plotted line intersects the standard drag curve for a sphere (y = 1), Rep = 130. • The diameter can be calculated from: Hence sphere diameter, xv = 619 mm. • For a cube having the same terminal velocity under the same conditions, the same CD vesus Rep relationship applies, only the standard drag curve is that for a cube (y = 0.806)

More Related