Atmospheric Stability

1. Atmospheric Stability Why do cumulus clouds develop? Why are temperature inversions associated with air pollution? Why do hot air or helium balloons rise?

2. Atmospheric Vertical Stability • A stable atmosphere has weaker mixing in the vertical • An unstable atmosphere has a large amount of mixing in the vertical

3. Why is this Important? • A stable atmosphere is associated with air pollution, fog, and strong surface temperature inversions in winter. • An unstable atmosphere is associated with lots of atmospheric mixing, with good air quality and sometimes convection/thunderstorms. • Meteorologists spend a lot of time trying to figure out whether the atmosphere will be stable or unstable

4. Stable Situation

5. Stable

6. Stable

7. Unstable

8. Unstable

9. Unstable

10. Unstable

11. Lava Lamp: Instability

12. Atmospheric Stability Concepts

13. Stable and Unstable If you push something in stable situation, it will return to its original location

14. Neutral Move it and it will stay in the place you left it.

15. In the real atmosphere, we don’t deal with rocks, but with air parcels • Reminder. An air parcel is an identifiable collection of air…think of a balloon. • As we discuss stability we need to keep in mind some essential ideas.

16. Essential Ideas • The density of an air parcel depends on temperature • Increase temperature > less dense • Decrease temperature > more dense • The equation that expresses this relationship is the perfect (or ideal) gas law. • P = r R T • P is pressure (Nm-2), r is density (mass/volume, kg m-3), T is temperature (°K), R is the gas constant

17. Essential Ideas • With a little algebra, we can solve for density: • r = P/(RT) • Thus, when pressure is held constant, if T increases than r decreases (less dense)! • There is a distinction (and often a difference) between conditions within an air parcel and its environment. Not necessarily the same!

18. Te Is not necessarily the same as Tp Tp Te Temperature Of the Air Parcel Up Temperature Of the Environment The pressure of the parcel and the environment are generally the same

19. Basic Rules • If an air parcel is warmer than it surrounding environment, then it is less dense that the environment as that level and tends to rise. • If an air parcel is the same temperature as the environment at that level, it has the same density as the environment at that level and will stay in position. • If an air parcel is colder that the environment at the same level, it is more dense than the environment and tends to sink.

20. None of this should surprise you. • A hot air balloon is warmer and less dense than the environment and rises. • A lead balloon sinks • Helium balloon rises because He is less dense than than the gases in the atmosphere.

21. But why does hot air rise?And why doesn’t all the air in the atmosphere fall down to the surface?

22. But why does a parcel of less dense air rise? Imagine an air parcel with the same density as the environment PT environment re rp Parcel Up Pb > Pt, so there is an upward force That balances out the weight. Stays put PB Weight

23. Hydrostatic Balance • The difference in pressure between the top and bottom of the air parcel produces an upward directed pressure gradient force. • This force balance gravity (the weight of the air parcel) • Called HYDROSTATIC BALANCE. • Most of the atmosphere is in this balance and that is why the atmosphere doesn’t collapse.

24. But what happens if an air parcel is warmer than the environment? • E.g. a hot air balloon • An parcel warmed by number of processes (e.g., warm surface, latent heating, etc.)

25. Warmer than the environment If the parcel warm, its density is less. PT environment r2 re Parcel Up PB Pb > Pt, so there is an upward force But the weight is less Thus, the parcel rises Weight inside circle is less

26. So.. • If parcel is warmer and thus less dense than the environment at that level it rises • If the parcel is is the same temperature as the environment it stays in place • If the parcel is colder than the environment, it it is more dense that air of the environment and sinks • https://www.youtube.com/watch?v=ydXJVSO-jXU

27. Meteorologists want to know how stable the atmosphere is by examining an atmospheric sounding..but how?

28. You need to know one more thing: the dry adiabatic lapse rate • The dry adiabatic lapse rate is the rate of change of temperatures with height of an unsaturated air parcel when it gets pushed up or down. • Lapse rate: the rate of change of temperature with height G = - DT/Dz So if temperature falls by 5C in 1000 meters (km) moving up in the vertical, the lapse rate is 5C per km.

29. Dry adiabatic lapse rate • The dry adiabatic lapse rate, Gd , is the rate of change of temperature with height of an unsaturated air parcel. • The value is 9.8 C per km • When an unsaturated air parcel rises it cools by 9.8C per km. Cooling due to adiabatic expansion. • When an unsaturated air parcel sinks it warms by 9.8C per km. Warming by adiabatic compression.

30. Reminder • The term adiabatic is used to denote situations where there are no sources of heating or cooling. No release of latent heat, no radiation, no nothing. • It turns out that by comparing Gd with the environmental lapse rate Ge, one can tell the vertical stability of unsaturated air parcels.

31. Case 1: Environmental lapse rate =dry adiabatic lapse rate • Gd=Ge • Neutral 1 km .2C .2C Gd = 9.8 C per km 10C 10C 0 km Parcel Environment

32. Case 2: Environmental lapse rate greater than dry adiabatic lapse rate • Ge >Gd • Unstable, parcel is warmer than environment 1 km .2C -5C Ge =15C per km 10C 10C 0 km Parcel Environment

33. Case 3: Environmental lapse rate <dry adiabatic lapse rate • Ge <Gd • Stable, parcel is cooler than environment 1 km .2C 5C Ge =5C per km 10C 10C 0 km Parcel Environment

34. We can evaluate stability by plotting the environmental sounding and the dry adiabatic lapse rate on a thermodynamic diagram

38. Summary • Ge > Gd unstable • Ge = Gd neutral • Ge < Gd stable • How can we make the atmosphere unstable? • Increase Ge !! • How do we do this? • Increase temperatures near the surface • Cool aloft

39. Increasing Lapse Rate (warm surface or cool aloft) cool Z Gd Gd warm Temp

40. Increasing Lapse Rate • Summer/warm time of the year, sun heats the surface. Unstable atmosphere develops, with up and down circulations

41. Increasing Lapse Rate • In winter, cooler air moving in aloft above warm water can produce enhanced lapse rate: instability and post-frontal showers.

42. In the atmosphere, instability results in convection

43. Can result in bumpy flights before landing on warm days

44. https://www.youtube.com/watch?v=vBf1UkSUQQ0

45. Simulationhttps://www.youtube.com/watch?v=nnJazkb9mNI

46. Instability and Convection Can Also Occur in the Kitchen

47. Now add saturation • Instability and convection can be completely dry…air remains unsaturated. • But if air has enough water vapor, rising air cools to saturation, producing clouds...usually cumulus clouds • But this produces another issue--when air becomes saturated and rises more, water condenses out producing latent heating. • Thus, saturated air cools less when rising

48. Saturated Adiabatic Lapse Rate(a.k.a. moist adiabatic lapse rate) • The lapse rate becomes Gs= 6.5 C per km Gs= 6.5 C per km Saturation Gd= 9.8 C per km

49. How do we calculate instability in a saturated atmosphere? No Problem! Just replace with saturated adiabatic lapse rate • Ge > Gs unstable • Ge = Gs neutral • Ge < Gs stable

50. Easier to get instability • Since Gs is less than Gd, it much easier to get instability in a moist, saturated atmosphere—like the U.S. East Coast in summer! • Another interesting possibility: Gs<Ge<Gd, called conditional instability: atmosphere is unstable when atmosphere is saturated and stable if unsaturated. • Much of the U.S. East Coast is conditionally unstable.