1 / 17

Introduction to the M16A4

Introduction to the M16A4. M16A4 TRAINING. Characteristics Zero Procedures Qualification Standards Summary. Characteristics. WEIGHT (pounds): approx 9.23 LENGTH (inches): 39.63 OPERATIONAL CHARACTERISTICS: Barrel rifling-right hand 1 twist (inches)= 7

Download Presentation

Introduction to the M16A4

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Introduction to the M16A4

  2. M16A4 TRAINING • Characteristics • Zero Procedures • Qualification Standards • Summary

  3. Characteristics • WEIGHT (pounds):approx 9.23 • LENGTH (inches):39.63 • OPERATIONAL CHARACTERISTICS: • Barrel rifling-right hand 1 twist (inches)=7 • Muzzle velocity (feet per second)=3,100 • Cyclic rate of fire (rounds per minute)=800 • Fires either Semiautomatic or Three-round Burst

  4. Characteristics MAXIMUM EFFECTIVE RATE OF FIRE: Semiautomatic (rounds per minute)=45 Burst (3-round bursts) (rounds per minute)= 90 Sustained (rounds per minute)= 12-15 • RANGE (meters): • Maximum range= 3,600 • Maximum effective range • Point target = 550 • Area target= 600

  5. Characteristics Unique Features • Carrying Handle detaches from the Upper Receiver. • Exposes a MIL –Standard 1913 rail. • Allows the mounting of various optics closer to eye level • and a more natural cheek to stock weld

  6. Characteristics Detachable Carrying Handle Rear Sight Aperture Mounting Knobs Elevation Knob

  7. Characteristics Detachable Carrying Handle • To remove carrying handle: • Unscrew mounting knobs counter clockwise • Lift carrying handle off upper receiver

  8. Characteristics Rail Adapter System • RAIL ADAPTER SYSTEM • The M5 rail adapter system (RAS) consists of a set of lightweight sections that replace the standard hand guards • Rails are MIL-standard 1913 • Is standard issue on the M16A4 • Provides a secure mounting point for various accessories

  9. Characteristics Rail Adapter System • Accessories may be mounted on the top, left and right side • of the RAS • The bottom rail of the RAS was designed for nonaiming • devices and will not retain zero.

  10. Characteristics Rail Adapter System • Rail Cover/ Heat Shield • Protects the shooter’s hand from direct contact with the • metal parts of the RAS • Protects the RAS surfaces from excess wear and damage • Are available in 11-, 9-, 6-, 5-, and 4-rib sections

  11. Characteristics Rail Adapter System spring latch • Rail Covers/ Heat Shield Removal • Apply thumb pressure to the center of the spring latch • Slide in the desired direction

  12. Characteristics Rail Adapter System Address Marking • Address Markings • Assists the user in remounting an accessory in the same • position to repeat zero • Allows standardization on precisely where to mount • certain accessories

  13. Zeroing Procedures SPECIAL INSTRUCTIONS: • The M16A2 zero target is used • Two consecutive 3 rd groups with 5 of 6 rds in the • 4CM circle • Majority of the round must be inside the circle

  14. Zeroing Procedures Mechanically Zeroing the M16A4. • Adjust the front sight post (1) up or down until the base of the front sight post is flush with the front sight post housing (2). • Adjust the elevation knob (3) counterclockwise, when viewed from above, until the rear sight assembly (4) rests flush with the carrying handle and the 6/3 marking is aligned with the index line (5) on the left side of the carrying handle. • Position the apertures (6) so the unmarked aperture is up and the 0-200 meter aperture is down. Rotate the windage knob (7) to align the index mark on the 0-200 meter aperture with the long center index line (8) on the rear sight assembly.

  15. Zeroing Procedures Battle sight Zero the M16A4. • Adjust the elevation knob (1) counterclockwise, when viewed from above, until the rear sight assembly (2) rests flush with the detachable carrying handle and the 6/3 marking is aligned with the index line (3) on the left side of the detachable carrying handle. • Adjust the elevation knob two clicks clockwise so the index line on the left side of the detachable carrying handle is aligned with the “Z” on the elevation knob. • Position the apertures (4) so the unmarked aperture is up and the 0-200 meter aperture is down. Rotate the windage knob (5) to align the index mark on the 0-200 meter aperture with the long center index line (6) on the rear sight assembly.

  16. Qualification Standards With Iron Sights: 23 hits out of 40 target exposures. With M68 CCO: 23 hits out of 40 target exposures.

  17. Summary • M16A4 is similar in operation to the M16A2 • Has a detachable carrying handle • Comes standard with the M5 RAS • Zeroing the iron sight is similar to the M16A2 • Qualification standards are the same

More Related