Groomie pdf

1. Guide to cleaning a Head Shaver An Electric Head Shaver is incredibly commodious. They are more portable than a manual razor, shaving cream, and aftershave and also cuts down on the shaving time drastically. But, to keep the Head Shaver performance at its peak, it requires a bit more upkeep and maintenance. Go through this article to get a proper idea of how to disassemble the shaver for cleaning and the entire cleaning process. Part 1:- Disassembling the shaver Hold the shaver over your bathroom sink: You will never want to clean your Electric Head Shaver over a floor as you will be cleaning hair and dead skin cells out of it. Once you clean your shaver over your sink, you can easily get rid of dead skin and fallen hairs with just a bit of water. Snap the head off of the shaver: Although models may vary, most of the Head Shaver has a snap-off head. Look for a small clip at the bottom of the head, just press it with your finger and it should come free. 1.Generally, Electric Head Shaver fits into two categories: foil or rotary shavers. For each category, the disassembly might be a bit different so always refer to the shaver’s manual instructions. 2.Be extra vigilant with the pieces you remove from the shaver. Some shouldn’t be cleaned as they are incredibly sensitive. Part 2: Cleaning the shaver: Tap the shaver lightly to shake out hair: Always hold the Head Shaver at an angle, the head always pointing downwards over your skin. Tap firmly the side of the shaver with one finger. Most of the hair can be shaken loose by tapping repeatedly. Keep repeating this process until you don’t see any hair falling out. Brush the shaver’s spinning parts and cutters: You might have got a micro bush with an Electric Head Shaver which is specifically designed for cleaning them. Always try to reach the mechanisms where a hair could get lodged into, once you remove the shaver head. Always brush gently which will prevent any scratches or scuffs. Clean water washable parts under the tap: Some Head Shaver can be cleaned with water without causing any damage to its mechanism.  You just need to hold them under the tap and wash with hot water. In order to clean any gunk or grime out of your shaver, you can also make use of soaps.

2. Allow the water washable parts to dry: Wipe down the Electric Head Shaver body and parts with a towel, and then allow it to air dry. Always make sure that there are no drops of water trapped inside. Apply a commercial cleaning spray: This spray helps to lubricate and de-grease the shaver’s blade and other mechanisms. After removing the shaver head, just spray a bit of the cleaner into the shaver. Reassemble the shaver: The complication of this step will mainly depend on how conscientiously you had to disassemble the Head Shaver. Just reverse the order of your disassembly and your shaver is put back together. The Bottom Line: Hope this article helps to ensure an effective cleaning of your Electric Head Shaver. If you are looking for head shavers that is going to give you an effective shaving time and again, you can check out Groomie Baldie Pro Head Shaver. Although new in the market, this product by Groomie has created a hype within just a few days. Check out their website for further details.