1 / 15

OS 50 SX-H Crank Mod.

OS 50 SX-H Crank Mod. Getting started. Remove the Fan, use crank locking tool. Remove the head and pull out the cylinder. Remove the piston. Remove the unmodified crank. Notice the webbing to be removed. First cuts with dremmel cut off wheel.

chapa
Download Presentation

OS 50 SX-H Crank Mod.

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. OS 50 SX-H Crank Mod.

  2. Getting started.

  3. Remove the Fan, use crank locking tool.

  4. Remove the head and pull out the cylinder.

  5. Remove the piston.

  6. Remove the unmodified crank.

  7. Notice the webbing to be removed.

  8. First cuts with dremmel cut off wheel.

  9. One side ruffed in.

  10. Almost there, just a bit more fine tuning.

  11. Finished modified crank.

  12. Cleaned, ready for oil and assembly.

  13. Fan’s back on using the crank locking tool.

  14. Ready to rock!

  15. I don’t recommend this mod be performed by anyone. I assume no responsibilities if anyone follows this example. Rick C.

More Related