1 / 16

Single Area OSPF

Single Area OSPF. Link State Routing Single Area OSPF Concepts Single Area OSPF Configuration. Identify Distance Vector & Link State Routing Characteristics. Updates contain entire routing table. Slow convergence. Updates consume significant bandwidth. Updates contain changes only.

Download Presentation

Single Area OSPF

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Single Area OSPF Link State Routing Single Area OSPF Concepts Single Area OSPF Configuration

  2. Identify Distance Vector & Link State Routing Characteristics Updates contain entire routing table Slow convergence Updates consume significant bandwidth Updates contain changes only Increased memory & processing requirements Updates sent to all routers Topology changes trigger updates Support CIDR/VLSM Updates sent to neighbours Rapid convergence Periodic updates

  3. Identify Distance Vector & Link State Routing Characteristics Updates contain entire routing table Slow convergence Updates consume significant bandwidth Updates contain changes only Increased memory & processing requirements Updates sent to all routers Topology changes trigger updates Support CIDR/VLSM Updates sent to neighbours Rapid convergence Periodic updates

  4. Summary of Link State Features • Responds quickly to network changes • Use ‘hellos’ to discover neighbours • Send updates when a there has been a change in the network topology • Updates contain changes not whole routing table • Calculates shortest path to each route in the network

  5. Link State Operation • Routers are aware of directly connected networks known as ‘links’ • Routers send ‘hellos’ to discover neighbours • Routers send Link State Advertisements to other routers informing them of their links • All routers add Link State Advertisements to their topological database • Shortest Path algorithm calculates best route to each network • When link states change LSA update sent to all routers which recalculate their routes

  6. Topological Database • Every router advertises directly connected networks via Link State Advertisements • Every router has it’s own view of the network – it builds a ‘topological database’ • Router A is aware of 2 paths to 192.168.157.0 – this provides redundancy should one of the routers fail

  7. Evaluation of Link State Routing

  8. Review – Link State & Distance Vector

  9. OSPF Overview • Preferred to RIP on larger networks • Open Standard - IETF RFC 2328 • Link State routing protocol • Interior Gateway Protocol for Autonomous systems • Metric based on bandwidth • Supports VLSM • OSFP can use ‘areas’ to allow hierarchical design

  10. OSPF Key Words Adjacencies database • Directly connected routers Topological Database • Routes to every network Routing table • Best path to each network Designated Router • a router elected by all others to represent the network area Area 0 • backbone

  11. Designated Router/Backup DR • All LSA sent to DR/BDR instead of to every single router • Reduces overhead of LSA updates • Standard on multi-access networks • DR is single point of failure – solution is BDR

  12. OSPF basic commands Router(config)#router ospfprocess-id Router(config-router)#network address wildcard-mask area area-id EXAMPLE Router(config)#router ospf 2 Router(config-router)#network 172.16.10.0 0.0.0.255 area 2 NOTES • process-id can be a value between 0 and 65,535 • Wildcard mask NOT subnet mask used with network command

  13. OSPF Loopback Address • For OSPF to function there must always be an active interface • Physical interfaces e.g. serial/Ethernet may not always be active – routing would fail • Configure virtual “loopback” interface as solution • Subnet mask will always be 255.255.255.255 Router(config)#interface loopback number Router(config-if)#ip addressip-address subnet-mask

  14. DR/BDR selection • To suit the topology used the network administrator will want to choose DR/BDR • DR/BDR election based on OSPF priority • Lowest priority=DR • 2nd lowest priority=BDR Router(config-if)#ip ospfpriority number Router#show ip ospf interfacetype number

  15. OSPF Cost • Cost is the OSPF metric used in path selection • Cost is based on bandwidth • Default bandwidth is 1.544Mbps – cost is 64 • Cost can be 1 (100Mbps) to 65535 • Cost is 108÷ bandwidth • Gigabit Ethernet will require change to default cost – why? Router(config)#interface serial 0/0 Router(config-if)#bandwidth 64 Router(config-if)#ip ospf costnumber

  16. Additional Configuration Network administrators can also configure • LSA update authentication • ‘Hello’ & ‘Dead’ interval timers • Default route to routers outside the area/autonomous system

More Related