1 / 31

Electronic Direction Finding

Electronic Direction Finding. Developed as part of the National Emergency Services Curriculum Project. How the Mission Starts. ELT set off by plane crashing, or EPIRB goes off when ship sinks or when either is accidentally set off 97 to 99 percent of all ELT missions are false alarms

chun
Download Presentation

Electronic Direction Finding

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Electronic Direction Finding Developed as part of the National Emergency Services Curriculum Project

  2. How the Mission Starts • ELT set off by plane crashing, or EPIRB goes off when ship sinks or when either is accidentally set off • 97 to 99 percent of all ELT missions are false alarms • SARSAT or COSPAS receives the signal • The satellite transmits the mirror locations of the target to a Local User Terminal (LUT)

  3. How the Mission Starts Continued • The LUT forwards the information to the Mission Control Center so that the appropriate Rescue Coordination Center can be notified • AFRCC, at Langley AFB, calls the mission coordinator or designee who proceeds with the callout

  4. Distress Beacon Frequencies • Primary: • 121.5 MHz, and its harmonics (243 MHz) • 243 MHz, military frequency • 406 MHz, next generation distress beacons transmitting location, tail number or boat identification, etc. • Training: • 121.775 MHz • Required by FAA as of 31 January 1998 • 121.6 MHz is no longer authorized for training

  5. What are you looking for?

  6. L-Per Components • Receiver: the actual metal box, has 7 features: • Dial: indicates signal strength or direction depending on whether in REC or DF mode • Mode switch: sets into DF, REC or OFF positions • Frequency selector: allows the selection of the frequencies possible depending on what is installed and the model

  7. L-Per Components Continued • Sensitivity switch: a variable switch that adjusts the receiver's sensitivity. The closer to the target the less sensitivity is required • Volume control: adjusts the audible signal • Speaker: emits the audible signal • Dial light switch: turns the dial light on for use in low light conditions

  8. L-Per Receiver

  9. L-Per Components Continued • Mast • The two piece wooden vertical mast is joined in the middle by a bolt and wing nut, allowing the mast to be folded for storage or while the unit is carried through the woods. • Make sure to hold the mast on both levels because the L-Per tends to be a knuckle-buster. • The coaxial cable for connecting the radio to the antenna, and mounting screws for attaching the receiver to the mast are mounted to the mast.

  10. L-Per Components Continued • Antenna crossbar • Antenna elements are attached to the crossbar, varying in size according to the frequency that you are searching on • Wire leads connect the antenna elements together at the switchbox located in the middle of the crossbar. • The antenna elements fold down parallel to the crossbar for storage or carrying through the wilderness.

  11. Using the L-Per

  12. L-Per in DF Mode • DF mode measures equal strengths of signal • Not completely accurate, but good enough! • When needle is centered, ELT could be either direction • Needle always POINTS to the ELT (DF=Follow the needle) • Use a TURN to TELL if the ELT is in front or behind you

  13. DF = Follow the Needle

  14. L-Per in REC Mode • Receive Mode Measures Signal Strength only • Signal comes from the direction of the arrows on the antenna (to your left)

  15. L-Per in REC Mode Continued • Use it with multiple centers (more than 2) to verify strongest path • Due Reflections • That’s most likely the true direction to the ELT

  16. Using the Tracker DF Unit

  17. Tracker Operating Instructions • Unfold antennae of the receiver unit, front antennae first then rear antennae • Start the receiver by pressing ON-button. • When turning on the receiver, it will automatically select the international distress frequency (121.5 MHz), channel 1, and the green lights start blinking on the LED display • Use the CH button switch between the distress and practice frequency

  18. Tracker Operating Instructions Continued • By Pressing the MAN button you can choose manual operation instead of automatic. • The MAN light will be lit when this mode has been selected • Receiver sensitivity can be adjusted in the manual mode • In manual or automatic mode, the LED display reflects signal strength in the direction of the signal beacon

  19. Body Shielding • A method of beating reflections at close range • Can use L-Per • Radio Shack JETSTREAM radio is better and CHEAP! • Body blocks out the signal • Called a NULL • Null should be at your BACK

  20. Body Shielding Continued • At extremely close range, a 2m VHF radio un-squelched may work • This works ok when trying to figure out a particular aircraft on a flight line, it will probably not identify a particular hangar

  21. Line of Sight Transmission • ELTs are limited to Line of Sight propagation and reflections • You don’t always need to hear the ELT • Carrier wave may be broadcasting with no audible sweep

  22. What Else Can Affect An ELT Signal? • Power lines • Fence Line (signal can follow) • Reflections off of obstacles • Hangars • Moving Target • Not using the Equipment Properly - See Picture at Right What’s wrong with this?

  23. Set Up the Equipment Completely Open the Antennae Fully for use in the field

  24. Reflections • To beat reflections • Check sensitivity often • Use REC mode • Usually strongest signal is not a reflection • Use the rubber ducky antenna when sensitivity is low • Re-trace your steps if necessary, going back to locations of strong signal strength

  25. Triangulation • Documenting team movements is logical, and can allow the team to locate the distress beacon sooner

  26. Triangulation Continued • You must be able to receive the signal • Center up DF unit on the signal • Take the magnetic bearing (shoot an azimuth) • Correct for magnetic variation • East is least, West is best • Plot your bearings (draw a line) on map • The ELT should be where the lines cross!

  27. Plot your Bearings

  28. What information is needed for the IC? • Make • Model and Model # • Manufacturer • Location Description • Approximate location (Latitude & Longitude) • Owner • Tail Number or Boat Name and Number • Time Found and Time Shut-off

  29. What information is needed for the IC? Continued • Switch Position on ELT or EPIRB: ON, OFF, or ARM • Manufacture Date • Battery Expiration Date • Information which could indicate reason for accidental or justified activation of ELT or EPIRB • NOTE: If you can’t get certain information, don’t worry, the AFRCC understands

  30. Electronic Direction Finding Tasks • Ground Team Members • O-0301: Determine Distress Beacon Bearing • O-0302: Locate a Distress Beacon • Ground Team Leaders • O-0303: Deactivate a Distress Beacon • O-0304: Triangulate on a Distress Beacon

More Related