1 / 26

Initial operation of ASDEX Upgrade with 100 % tungsten PFCs

Rudolf Neu With contributions from: V. Bobkov, R. Dux, A. Kallenbach, T. Pütterich, H. Greuner, Ch. Hopf, C.F. Maggi, H. Maier, M. Mayer, V. Rohde, ASDEX Upgrade Team. Initial operation of ASDEX Upgrade with 100 % tungsten PFCs. Transition to W PFCs in ASDEX Upgrade

cid
Download Presentation

Initial operation of ASDEX Upgrade with 100 % tungsten PFCs

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Rudolf Neu With contributions from: V. Bobkov, R. Dux, A. Kallenbach, T. Pütterich, H. Greuner, Ch. Hopf, C.F. Maggi, H. Maier, M. Mayer, V. Rohde, ASDEX Upgrade Team Initial operation of ASDEX Upgrade with 100 % tungsten PFCs

  2. Transition to W PFCs in ASDEX Upgrade Boundary Conditions for Experimental Campaign Arguments on boronisation First Results of initial operation Operation with 100 % W PFCs R.Neu

  3. Steps in ASDEX Upgrade towards a full W device Steady increase of area of main chamber W PFCs since 1999 Rationales: • risk minimisation • physics investigations • partitioning of installation time • production capacity aux aux . . limiter limiter W W - - coating coating starting starting with with campaign campaign 2003/2004 2003/2004 guard guard / / ICRH ICRH 2004/2005 2004/2005 limiter limiter 2005/2006 2005/2006 2007 2007 lower lower PSL PSL hor. hor. plate plate roof roof baffle baffle R.Neu

  4. Optimisation of VPS coatings / HHF tests in GLADIS • Thermal Screening: • surface temperatures • > 2000°C •  no macroscopic defects 200 µm W VPS (Plansee) on SGL R6710 R.Neu

  5. Optimisation of VPS coatings / HHF tests in GLADIS • Cyclic • Loading: • 200 pulses @ • - 10.5 MW/m² • 3.5 s • Tsurf > 1600°C • coatings qualified for use in the lower divertor R.Neu

  6. Steps in ASDEX Upgrade towards a full W device R.Neu

  7. Steps in ASDEX Upgrade towards a full W device R.Neu

  8. Transition to W PFCs in ASDEX Upgrade Boundary Conditions for Experimental Campaign Arguments on boronisation First Results of initial operation Operation with 100 % W PFCs R.Neu

  9. AUG is operated with the help of three flywheel generators: EZ2 (1.45 GJ / 167 MVA): toroidal field EZ3 (500 MJ /144 MVA) + EZ4 (650MJ/220MVA): OH, pol.field, aux. heating Reconfiguration of power supplies necessary: less power, less energy available Ip  1.0 MA, pulse length 3-4 s, Paux 7.5 MW, intermediate densities / triangularities (@ 1 MA) EZ3 > 11 kA EZ3 ≤ 11 kA 20 15 Limit: 11 kA New-EZ3 (kA) 10 5 0 0.4 0.6 0.8 1.0 1.2 Ip(MA) Constraints imposed by damage of EZ4 R.Neu

  10. Setup of program for 2007 campaign priority envisaged rel. weight (whole campaign) I. Exploration of W compatibility (discharges in agreement with general boundary conditions) II. Extension of working space - rad. cooled plasmas - impr. H-Mode (high  low density) III. Other ITER related physics investi- gations, compatible with above results and requirements 30% 20% 50% R.Neu

  11. Boundary conditions set by W-PFCs (during phase I., to be refined): density:  7e19/m³ (gas puff rate > 6e21/s) q-edge: > 3.2 f(ELM): > 60 Hz dominant central heating (no pure off axis heating) Pheat < H-mode threshold or Pheat > 2xH-Mode threshold power/energy limits for upper divertor (5 MW 4s, 10MW 1s) monitoring of limiter (and divertor) glow (restrictions on shape, power, energy: to be adjusted) power/energy limits for lower divertor from operation / results of radiatively cooled plasmas Guidelines during initial operation R.Neu

  12. Research Topics of W-programme at AUG for the upcoming campaign(s) Investigation will concentrate on: • transition to C-(low-Z) free machine: - radiatively cooled (integrated) scenarios by simultaneous use of noble gas puff, central heating and ELM pacemaking - optimization of gas species/injection • evolution of hydrogen retention: - influence on gas balance and D inventory in PFCs • disruption characteristics: - differences in current decay / run-aways • optimization of ICRF: - is the simultaneous use of with high-Z PFCs possible R.Neu

  13. Transition to W PFCs in ASDEX Upgrade Boundary Conditions for Experimental Campaign Arguments on boronisation First Results of initial operation Operation with 100 % W PFCs R.Neu

  14. main H ~ 1, Prad ~ 30 % Reminder: Unboronized start-up with W HS successful R.Neu

  15. Conditioning - large O getter (even in non plasma exposed areas):  easier break down  higher density limit  facilitates start up - use of BD6  pre-loading of wall,  strong pumping larger D puffing rates  easier transition to D: Why Boronisation • Coating of surfaces - suppression of W influx - suppression of other intrinsic metallic impurities R.Neu

  16. Estimates for B Erosion Thickness of boron layer Main chamber: 50 nm  3e21/m² Limiter: 50 nm  3e21/m² Divertor: 10 nm  5e20/m² Particle fluxes / Particle temperatures (energies) / B Yield Main Chamber: 1e21 / (E  100 eV) / 1e-2 Limiter: 1e22 / T= 20 eV / 1e-2 Divertor: 1e23 / T=5 eV / 5e-4 Live-time of boron layer Main chamber: 300 s (100 disch) Limiter: 30 s (10 disch) Divertor: 10 s (3 disch) R.Neu

  17. strong reduction of W influx and concentrations for ICRH only, H-Mode threshold increases stronger than for NBI for aged boronisation time constants shorter than typical distance between boronisations recovery of W influx depends on particle and energy load Effect of boronisation 800 kA 1.8MW ICRH R.Neu

  18. strong reduction of W influx and concentrations for ICRH only, H-Mode threshold increases stronger than for NBI for aged boronisation time constants shorter than typical distance between boronisations recovery of W influx depends on particle and energy load Effect of boronisation R.Neu

  19. Operation/investigation of W machine without (any) intrinsic low-Z radiator Comparison of boronised / un-boronised machine:  maybe able to proof of hypothesis on B influence D retention ‚without‘ low-Z (C,B) contamination Comparison of D pumping W wall / boronised W wall and H-D transition Benefits of start-up without boronization R.Neu

  20. Milestone: Steady state H-Mode at intermediate density and heating power with H~1 Specific Investigations: Exposure of deposition probes to measure: evolution B,C,W impurities, D retention Particle Balance (in co-op. TS) Influence of ICRH Documentation of edge plasma parameters / radiative cooling (if applicable/necessary) Aims for the unboronized phase R.Neu

  21. Transition to W PFCs in ASDEX Upgrade Boundary Conditions for Experimental Campaign Arguments on boronisation First Results of initial operation Operation with 100 % W PFCs R.Neu

  22. Conditioning by baking - He / He-D glow • 10 days baking @ 150°C • overnight glow in He • (He+10%D2,  500V, 4x1.8A) •  Strong pumping of C and O • (through CO and CO2) R.Neu

  23. Re-start since 24/4/07 (5 days of operation) Reconfiguration of power supplies for OH/V-coils main issue Reliability of break-down not yet satisfactory (low-Z impurities, gas release) Divertor configurationsucces- fully acchieved W contaminationnot important First Results of initial operation R.Neu

  24. Re-start since 24/4/07 (5 days of operation) Reconfiguration of power supplies for OH/V-coils main issue Reliability of break-down not yet satisfactory (low-Z impurities, gas release) Divertor configurationsucces- fully acchieved W contaminationnot important First Results of initial operation R.Neu

  25. Long term evolution of W concentrations • reduced cW at relevant auxiliary heating power and densities R.Neu

  26. P prerequiste first few weeks R related first half of campaign E extended end of first half of campaign C compatible first few months (lower priority) O orthogonal second half of campaign Priority within categories by TFs Classification of proposals R.Neu

More Related