1 / 10

H 2 O(l) 气化为 101325Pa 的 H 2 O(g) 的 Q 、 W 、△ U 、△ H 、 △ S 、 △ G 、 △ A 。

例 1 已知在正常沸点时 H 2 O 的摩尔蒸发焓为 40.66kJmol -1 , H 2 O(l) 和 H 2 O(g) 的摩尔体积分别为 18.80 cm 3 · mol  1 和 3.014  10 4 cm 3 · mol  1 。求正常沸点 100℃ 下 1mol. H 2 O(l) 气化为 101325Pa 的 H 2 O(g) 的 Q 、 W 、△ U 、△ H 、 △ S 、 △ G 、 △ A 。 (1) p 外 =101325Pa ; (2) p 外 =0 。. (2).

claude
Download Presentation

H 2 O(l) 气化为 101325Pa 的 H 2 O(g) 的 Q 、 W 、△ U 、△ H 、 △ S 、 △ G 、 △ A 。

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. 例1已知在正常沸点时H2O的摩尔蒸发焓为40.66kJmol-1,H2O(l)和H2O(g)的摩尔体积分别为18.80 cm3·mol1和3.014104 cm3·mol1。求正常沸点 100℃ 下 1mol H2O(l)气化为101325Pa的H2O(g)的Q、W、△U、△H 、△S、△G 、 △A 。 (1) p外=101325Pa;(2) p外=0。

  2. (2) DU = 37.61 kJ, DH = 40.66 kJ W=0

  3. 例22mol理想气体在300K时自1MPa恒温膨胀至0.1MPa,计算Q、W、ΔU、ΔH、ΔS、ΔA、ΔG,并判断可逆性。(a)p外=0,(b) p外=0.1MPa,(c) p外=p。 解:状态函数变化与过程无关,三个过程有相同答案。

  4. (a) (b) (c)

  5. 例30℃、1MPa、10dm3的单原子分子理想气体,绝热膨胀至0.1MPa,计算Q、W、ΔU、ΔH、ΔS,并判断可逆性。(a) p外=p,(b) p外=0.1MPa,(c) p外=0 。 解:三个过程终态不同。 (a)

  6. (b)

  7. Q=0, W=0, △U=0, T2=273.2K, V2 =10dm3 (c) (为什么?) △H=0(为什么?) (b) (a)

  8. 例40.1MPa下的1mol双原子分子理想气体连续经历下列几步变化:(a)从25℃恒容加热到100℃;(b)向真空绝热膨胀至体积增大一倍;(c)恒压冷却到25℃;例40.1MPa下的1mol双原子分子理想气体连续经历下列几步变化:(a)从25℃恒容加热到100℃;(b)向真空绝热膨胀至体积增大一倍;(c)恒压冷却到25℃; 试求总的Q、W、ΔU、ΔH、ΔS。 解:

  9. 例5如图所示,两边气体均为0C,0.1MPa,抽去隔板后,两气体均匀混合。求过程的Q、W、U、H、S、G。并判断可逆性。例5如图所示,两边气体均为0C,0.1MPa,抽去隔板后,两气体均匀混合。求过程的Q、W、U、H、S、G。并判断可逆性。 0.2molO2 0.8molN2 0.2 mol O2 0.8 mol N2 解:

More Related