Water Jet Ejectors

1. Water Jet Ejectors Water ejectors are vacuum pumps, driven by a high pressure water or steam. They use kinetic energy of the driving medium to suck in gases, vapours or alternative liquids then discharge the resultant mixture against a counter pressure. Turbine Works manufactures water jet ejectors for industrial and marine functions. Ejectors are easy in design and reliable operative since they do not have movable elements like standard pumps. Major elements of an ejector are an inlet casing, nozzle, mixing chamber and diffuser. Since there aren't any moving elements, no lubrication is necessary and maintenance is nominal. Ejectors are self-priming merely activated by simply turning on the flow of the driving water. Crystaltcs is manufacturing Water Jet Ejectors & this ejector is using Water instred of Steam. Motive fluid can be some other liquid also. Normal range for a Water Jet Ejector is from atmosphere to 45 mm hg abs depending upon the water temperature. These water jet ejectors are generally employed for lifting, mixing, emptying out liquid or slurries from tanks & pits. Water jet ejector convert water into a motive force. Water jet ejector uses water as driving force. The induced fluid is entrained and condensates are condensed. The non condensed gases are then compressed within the diffuser& discharged into a constant level water sea tank against air pressure. Maximum absolute pressure obtained by these sorts of Ejectors depends on the temperature of water or motivating fluid. Generally absolute pressure at shut off nearly equals to the vapour pressure of the operating liquid at operational temperature. These units are most economical where condensable vapours are to be handled. Crystal TCS Pvt. Ltd. For more information Give us call at: +91 253 2501600 E-mail : info@crystaltcs.com Visit us: http://www.crystaltcs.com/water-treatment.php