1 / 7

iServ Technical Repeater Manual

iServ Technical Repeater Manual. Base: 8660 Repeater : 4024. Install a Repeater. Firmware has to be done on all devices: (Follow Firmware Procedure) Handset Base Station Repeater Login onto Base Repeater Tab. DECT sync Mode - Manually

danil
Download Presentation

iServ Technical Repeater Manual

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. iServTechnical Repeater Manual Base: 8660 Repeater: 4024

  2. Install a Repeater • Firmware has to be done on all devices: (Follow Firmware Procedure) • Handset • Base Station • Repeater Login onto Base • Repeater Tab. • DECT sync Mode - Manually • RPN - Select RPN Where Repeater will be installed. • DECT Sync Source - Point RPN (Base Station) closest to repeater. • If Multi Cell is used, check the Multi cell tab for RPN details. Click Save. Open Repeater Tab again.

  3. Registering a Repeater • Select desired repeater. • Click register. • Repeater will have flashing green LED. • Once registered, LED will be solid Green. • DB level will be provided. DO NOT exceed -80db on the repeaters. Repeater has been setup successfully.

  4. Repeater Firmware Procedure • Place the “Repeater Upgrade” file in root directory. • Install the dongle drivers. • Check Comport in Device Manager. • Go to Root file: Open FL7.cfg with Notepad. • Edit the Comport. • Save & Exit. • Open CMD prompt and type the following: • Fl.bat rota (Press the TAB button, this will auto complete the file name). • C:\Repeater Upgrade>fl.bat Rota.spi_v0026.hex • Insert the Dongle into the Dongle kit and Repeater. • Press and HOLD the Dongle Button. • Insert the Power cable into the Dongle Kit. • Release the Dongle button. • Press enter on the CMD Prompt. • Wait for Success. • FIRMWARE COMPLETE.

  5. Firmware Locations • Samsung Dealer: • http://www.miatech.co.za/Partner/Technical/Software/I-Serv%20IP%20DECT/ • Username: “Dealer Username” • Password: “Dealer Password” • NON Samsung Dealer: • http://www.miatech.co.za/Partner/iserv/ • Username: iserv • Password: iserv

  6. Repeater Upgrade Kit

  7. Repeater Upgrade Video Press Play

More Related