1 / 29

Street Rod Jeopardy

Street Rod Jeopardy. The _____ is between the fuel line and the float bowl inlet. Fuel pump Regulator Muffler Filter 10. What is the purpose of a fuel tank? Pump fuel to the engine Storage Weight for rear traction Warm-up the fuel 20. What is between the fuel tank and the

dareh
Download Presentation

Street Rod Jeopardy

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Street Rod Jeopardy

  2. The _____ is between the fuel line • and the float bowl inlet. • Fuel pump • Regulator • Muffler • Filter • 10

  3. What is the purpose of a fuel tank? • Pump fuel to the engine • Storage • Weight for rear traction • Warm-up the fuel • 20

  4. What is between the fuel tank and the • mechanical fuel pump • Carburetor • Gauge • Lines • Pressure • 30

  5. What is the ideal air: fuel ratio • 14:1 • 20:1 • 20:2 • 1:1 • 40

  6. In which stroke of a four stroke cycle engine • does the air-fuel mixture enter the engine? • Intake • Compression • Exhaust • Power • 50

  7. What condition causes the tire to wear on • both outer edges? • Over inflation • Burnouts • Flat tire • Under inflation • 10

  8. Tire A has a tread wear rating of 200 and tire B has a tread wear rating of 400. Which will last longer? • Tire A • Tire B • They will last the same • 20

  9. Normal passenger car tire pressure is about • 10-20 • 20-25 • 30-35 • 40-60 • 30

  10. Which step is first performed • when using the tire changer? • Break the bead • Deflate the tire • Install the valve core • Lube the tire • 40

  11. The pressure stamped onto the sidewall of a • tire is: • When the tire will explode • The PSI to which it should be inflated • The Maximum PSI for that tire • The total pressure of all four tires. • 50

  12. If 14 parts air to 1 part gas is considered an • ideal air:fuel ratio (14:1), what term do we • apply to an 11:1 ratio? • Lean • Cold • Rich • Hot • 10

  13. What is a fuel line made from? • Aluminum • Copper • Steel • Zinc • 20

  14. When the plate at the top of the carburetor • is almost closed, the fuel mixture will be • ____ than normal. • Leaner • Colder • Richer • Hotter • 30

  15. The plate at the top of the carburetor is called • Choke • Throttle • Idle • Float • 40

  16. An engine needs five things to make power. Here are four: spark, fuel, spark timing and oxygen. What is missing? • Compression ratio • CO2 • NOx • Compression • 50

  17. The plate at the bottom of the carburetor • is called the ______________ • Choke • Throttle • Idle • Float • 10

  18. What structure can be used when designing • a vehicle? • Full Frame • Unit Body • Sub Frame • All the above 20

  19. What condition causes the tire to wear • in the center • Over inflation • Burnouts • Flat tire • Under inflation • 30

  20. The tool used to lift or pry the tire bead • over the rim is called • Tire iron • Crow bar • Extension • Body Ram • 40

  21. When using the tire changing machine, • the first step after deflating the tire is to • Remove the valve • Balance the tire • Fill it with air • Break the bead • 50

  22. The camshaft of an eight cylinder engine has • Four cams • Eight cams • Twelve cams • Sixteen cams • 10

  23. Daily Double • Engine parts that convert reciprocating • motion to rotary motion are the • Connecting rod and crankshaft • Piston and connecting rod • Crankshaft and flywheel

  24. The movement of the piston from TDC to BDC • is called a • Cycle • Stroke • Piston movement • 30

  25. The Carburetor mounts on the • Exhaust manifold • Cylinder head • Intake manifold • 40

  26. Two types of piston rings are • Compression and locking • Compression and oil control • Compression and power • Compression and sealing • 50

  27. Wrong Answer

  28. You are correct!

  29. Final Jeopardy Category: Small Engines What part is between the cylinder head and the block?

More Related