1 / 11

Problem 6.54*

Problem 6.54*. Jewett, Walker, Reese, McMullan. Given. A swimming pool W by Y by h deep is to be emptied by gravity through a long pipe. Figure 1. Given. Table 1. Problem. Derive a formula for the time to empty the tank from an initial level h 0. Assumptions.

dberman
Download Presentation

Problem 6.54*

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Problem 6.54* Jewett, Walker, Reese, McMullan

  2. Given • A swimming pool W by Y by h deep is to be emptied by gravity through a long pipe. Figure 1

  3. Given Table 1

  4. Problem • Derive a formula for the time to empty the tank from an initial level h0.

  5. Assumptions • Constant average friction factor • Liquid • Steady • Incompressible • Neglect Minor Losses • Gage pressure. • The area of the tank is much greater than the area of the pipe. • Horizontal axis is at the bottom of the tank.

  6. Solution • Start with the energy equation: Therefore:

  7. Solution Assume: So the energy equation becomes: Assume:

  8. Solution Simplify equation 1.5: Flow in equals flow out: Substitute into equation 1.7:

  9. Solution Factor out common terms: Isolate V1: Multiply equation 1.11 by ho2:

  10. Solution Take the square root to get the final answer:

  11. BME Application • An application of this problem in Biofluids is an IV drip because IVs are emptied using gravity. It is very important for doctors to know how much time it will take to empty an IV bag. The tubing that the IV is emptied into will have certain characteristics that will affect the flow. All of these considerations need to be taken into account in order to administer proper dosages.

More Related