1 / 17

PLASMA UNIT FOR PROCESSING OF CARBON CONTAINING WASTE

PLASMA UNIT FOR PROCESSING OF CARBON CONTAINING WASTE. V.E. Messerle Combustion Problems Institute, Almaty , Kazakhstan Institute of Thermophysics of SB RAS, Novosibirsk, Russia A.L. Mosse, A.N. Nikonchuk

debragillis
Download Presentation

PLASMA UNIT FOR PROCESSING OF CARBON CONTAINING WASTE

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. PLASMA UNIT FOR PROCESSING OF CARBON CONTAINING WASTE V.E. Messerle Combustion Problems Institute, Almaty, Kazakhstan Institute of Thermophysics of SB RAS, Novosibirsk, Russia A.L. Mosse, A.N. Nikonchuk A.V. Luikov Heat and Mass Transfer Institute of the National Academy of Sciences of Belarus, Minsk, Belarus A.B. Ustimenko Research Institute of Experimental and Theoretical Physics of Kazakhstan National University, Almaty, Kazakhstan E-mail: ust@physics.kz 3rd World Congress on Petrochemistry and Chemical Engineering November 30 - December 02, 2015 Atlanta, USA

  2. COMPOSITION OF MEDICAL WASTE

  3. AVERAGED ULTIMATE ANALYSIS OF MEDICAL WASTE

  4. ADVANTAGES OF PLASMA METHODS FOR WASTE PROCESSING • Complete decomposition of the waste with the formation of basic compounds that considerably simplifies the cleaning of contaminants; • Possible co-processing of different types of waste without pre-sorting; • A significant decrease in the volume of flue gases, and, consequently, the load on the gas cleaning system; • Smaller carryover of dispersed particles ; • High performance with small dimensions of equipment; • Ability to create a desired gaseous atmosphere; • Ability to produce the final product in a stable form; • Possibility of operative adjustment the process by changing the flow rate of oxidant (air) and power of plasma torches.

  5. THERMODYNAMIC MODELLING For computation of the solid fuels gasification thermodynamic code TERRA was used. The calculations were performed over a range of temperatures from 400 to 4000 K and pressure 0.1 MPa. Composition of bone meal for processing in plasma furnace: 1. The moisture content ≤9%; 2. The fat content ≤ 10 %; 3. Ash ≤ 61 %; 4. The protein ≥19 %; 5. Metallic impurities ≤ 200 mg/tone Bonetissue (boneofadultanimal) hasthefollowingchemicalcomposition (wt.%): Ca10(PO4)6(ОH)2 – 70, C – 14, O – 9, N – 4, H – 2, S – 1.

  6. THERMODYNAMIC MODELLING Variant 1: 10 kg of waste + 1.5 kg of air Variation of theconcentrationoforganiccomponents of thegasphasedependingonthetemperatureofthebone tissue plasma processing

  7. THERMODYNAMIC MODELLING Variant 1: 10 kg of waste + 1.5 kg of air Variation of theconcentrationofinorganiccomponents of thegasphasedependingonthetemperatureofthebone tissueprocessing

  8. THERMODYNAMIC MODELLING Variant 1: 10 kg of waste + 1.5 kg of air Variation of theconcentrationofcomponentsofthecondencedphasedependingonthetemperatureofthebone tissueprocessing

  9. THERMODYNAMIC MODELLING Variant 1: 10 kg of waste + 1.5 kg of air Variation of specific power consumption for the bone tissue processing depending on the temperature: 1 - 10 kg of waste + 1.5 kg of air; 2 - 10 kg of waste + 3 kg of air; 3 - 10 kg of waste + 5 kg of air; 4 - 10 kg of waste + 1 kg of air + 0.5 kg of water steam

  10. Functional scheme of the experimental technological installation 1- arc plasma torch; 2 – box chamber; 3- chamber for reburning; 4 – bagfilter; 5 – ecological filter; 6 – exhaust fan; 7 – exhaust pipe; 8 – container for slag; 9 – air for reburning

  11. Layout of plasma torch PL-03/30 Plasma torch in operation PL-03/30: temperature of the plasma flame is 5000 K

  12. Plasma torch VORTEX-200 Plasma torch VORTEX-200 layout Tests of plasma torch VORTEX-200

  13. Plasma Box Furnace

  14. Plasma Box Furnace with Plasma Torch VORTEX-200

  15. PARAMETERS OF THE PLASMA BOX FURNACE • Burning device - DC plasma torch, output power of 15 to 35 kW. • Plasma forming gas – air, flow 1,0-2,0 g/s. • Geometric dimensions of the box furnace: height – 220 mm, side - 220 mm, lining - 40 mm. • Amount of processed material - animal bone and bone meal: 10,0-14,0 kg / h • Modes of operation: warming up - 5 minutes, burning of organic matter - 3 min, melting of inorganic - 7 min. The total work cycle (including cooling and loading of new portion) - 30 min.

  16. GAS COMPOSITION AFTER PLASMA PROCESSING OF BIOMEDICAL WASTE

  17. Conclusions In the plasma box furnace the process of recycling of organic matter takes place. Waste under the influence of temperature is completely broken up to form of simple chemical compounds. The relative contents of processed products depends on the humidity and temperature of the process. Plasma-recycling technology is a universal.It can be used for recycling of any waste, regardless of their qualitative and quantitative composition. Developed the technology and equipment to implement the process of thermal processing of solid and packaged biomedical waste is tested on real materials - animal bones.

More Related