1 / 15

Design Studies for a Compact Tungsten Scintillator Electromagnetic Calorimeter

Design Studies for a Compact Tungsten Scintillator Electromagnetic Calorimeter . C.Woody , S.Cheung , J.Haggerty , E.Kistenev , S.Stoll For the PHENIX Collaboration and Brookhaven National Lab. October 26, 2011. N29-2 2011 IEEE NSS/MIC Valencia, Spain.

decker
Download Presentation

Design Studies for a Compact Tungsten Scintillator Electromagnetic Calorimeter

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Design Studies for a Compact Tungsten Scintillator Electromagnetic Calorimeter C.Woody, S.Cheung, J.Haggerty, E.Kistenev, S.Stoll For the PHENIX Collaboration and Brookhaven National Lab October 26, 2011 N29-2 2011 IEEE NSS/MIC Valencia, Spain

  2. What do we mean by “Compact Calorimetry” ? • Compact implies: • showers have limited extent in both transverse • and longitudinal dimensions • (ideally would like showers to be point-like) • calorimeter is physically small ( dense) so that it • occupies a minimal amount of space • To achieve this, one requires: • Small Moliere radius • Short radiation length • However, there is a tradeoff between “compactness” • and energy resolution (determined by the sampling fraction and photostatistics) C.Woody, 2011NSS N29-2, 10/26/11

  3. The Present PHENIX Experiment C.Woody, 2011 NSS N29-2, 10/26/11

  4. The Transformation to sPHENIX C.Woody, 2011NSS N29-2, 10/26/11

  5. The sPHENIX Detector C.Woody, 2011NSS N29-2, 10/26/11

  6. Calorimeter Simulation (GEANT4) Energy Resolution vs Sampling Thickness Moliere Radius RM = 21.1 MeV ~ 2.6 X0 9.3 mm for W 1 X0 (3.5 mm) W 1.5 mm scint 30 % scint by volume 3.7% energy fraction Approximately 90% of energy is contained within 1 RM, nearly independent of E = + b ( a only includes sampling fluctuations, 1.5 mm scintillator plates ) sPHENIX requires 15% Want small photostatistics contribution to the overall resolution C.Woody, 2011NSS N29-2, 10/26/11

  7. Preshower and Longitudinal Segmentation Super conducting Magnet (~ 1X0) Hadronic Calorimeter Compact EMCAL (~ 15 X0) Preshower • ~ 3-4 X0 Silicon-Tungsten • ~ 2 mm W plates, ~ 1 mm Si strips • → See NP5.S-180 (E.Kistenev) Preshower • Longitudinal segmentation required for: • g/p0 separation for single g and jet • measurements up to pT~ 40 GeV/c • e/p separation (~ 10-3) for measuring • J/Y’s and U’s p0 g C.Woody, 2011NSS N29-2, 10/26/11

  8. Compact EMCAL for sPHENIX • Requirements: • Compact • Projective • Hermetic • Readout works in magnetic field • Low cost • Three designs being considered: • Optical Accordion • Projective Shashlik • Scintillating Fiber (SciFi) C.Woody, 2011NSS N29-2, 10/26/11

  9. Optical Accordion Accordion design similar to ATLAS Liquid Argon Calorimeter • Optical readout with either scintillating • fibers or scintillating plates with embedded • wavelength shifting fibers • Fibers read out with SiPMs or APDs Needs to be hermetic and projective • Volume increases with radius • Scintillator thickness doesn’t increase with • radius, so either tungsten thickness must • increase or the amplitude of the oscillation • must increase, or both • Plate thickness cannot be totally uniform • due to the undulations • Small amplitude oscillations minimize both • of these problems C.Woody, 2011NSS N29-2, 10/26/11

  10. Accordion Shaped Tungsten Plates Tungsten Heavy Powder, Inc (San Diego, CA) • Sintered from tungsten powder • Final density ~ 17.5 g/cm3 • Shape and thickness variation not a problem • Fibers can be glued in between plates with tungsten/epoxy composite • (density ~ 10-11 g/cm3) C.Woody, 2011NSS N29-2, 10/26/11

  11. SiPM 90Sr source Fibers Trigger pmt Light Output of Scintillating Fibers with SiPM PMT2 Sr90 source above PMT3 trigger MPPC Light output ~16 p.e./0.2 MeV  ~ 80 p.e./MeV Challenge is to collect all this light onto a relatively small area SiPM or APD. C.Woody, 2011NSS N29-2, 10/26/11

  12. Light Output of Scintillating Tiles + WLS Fibers + SiPM Possible readout using scintillating plates and WLS fibers Light output with ~ 25 p.e./MeV with looped fibers Advantage of fewer fibers compared with pure scintillating fiber design WLS fibers Scint tile SiPM C.Woody, 2011 NSS N29-2, 10/26/11

  13. Projective Shashlik • Size of absorber and scintillator plates would both increase as a function of depth • Small size improves light collection • Fewer fibers to collect light onto a SiPM or APD C.Woody, 2011NSS N29-2, 10/26/11

  14. Light Output of Scintillating Tiles + WLS Fibers + SiPMShashlik Configuration 137Cs source SiPM Trigger pmt Tile stack Light output depends linearly on number of fibers ~ 12 p.e./MeV with 4-5 fibers C.Woody, 2011NSS N29-2, 10/26/11

  15. Summary • Both physics requirements and cost limitations drive the need for highly compact calorimeters in future collider experiments. • We believe a highly segmented optical readout tungsten-scintillator calorimeter can meet those requirements. • Several calorimeter configurations have been studied that appear to be able to be able to meet those needs. • Work will continue to develop one or more of these designs into a working prototype for beam testing next year. C.Woody, 2011NSS N29-2, 10/26/11

More Related