1 / 25

Wide Area Network Performance Analysis Methodology

Wide Area Network Performance Analysis Methodology. Wenji Wu, Phil DeMar, Mark Bowden Fermilab ESCC/Internet2 Joint Techs Workshop 2007 wenji@fnal.gov , demar@fnal.gov , bowden@fnal.gov. Topics. Problems End-to-End Network Performance Analysis TCP transfer throughput

dermot
Download Presentation

Wide Area Network Performance Analysis Methodology

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Wide Area Network Performance Analysis Methodology Wenji Wu, Phil DeMar, Mark Bowden Fermilab ESCC/Internet2 Joint Techs Workshop 2007 wenji@fnal.gov, demar@fnal.gov, bowden@fnal.gov

  2. Topics • Problems • End-to-End Network Performance Analysis • TCP transfer throughput • TCP throughput is network-end-system limited • TCP throughput is network-limited • Network Performance Analysis Methodology • Performance Analysis Network Architecture • Performance Analysis Steps

  3. 1. Problems • What, Where, and How are the performance bottlenecks of network applications in wide area networks? • How to diagnose network/application performance quickly and efficiently?

  4. 2. End-to-End Network/Application Performance Analysis

  5. 2.1 TCP transfer throughput • An end-to-end TCP connection can be separated into: the sender, the networks, and the receiver. • TCP adaptive windowing scheme consists of a send-window (Ws), congestion-window (CWND), and receive-window (WR). • Congestion Control: congestion-window • Flow Control: receive window • The overall end-to-end performance of TCP throughput is decided by the sender, the network, and the receiver, which are modeled and symbolized in the sender as Ws, CWND, and WR. Assume the round trip time RTT, the instantaneous TCP throughput at time t: Throughput (t) = min{Ws(t), CWND(t), WR(t) }/RTT(t)

  6. 2.1 TCP transfer throughput (cont) • If any of the three windows is small, especially when such conditions last for a relatively long period of time, the overall TCP throughput would be seriously degraded. • The TCP throughput is network-end-system-limited for the duration T, if it has: • The TCP throughput is network-limited for the duration T, if it has:

  7. 2.2 TCP throughput is network-end-system limited • User/Kernel space split • Network application in user space, in process context • Protocol processing in kernel, in the interrupt context • Interrupt-driven operating system • Hardware interrupt -> Software interrupt -> process

  8. 2.2 TCP throughput is network-end-system limited (cont) • Factors leading to a relatively small window of WS(t) & WR(t) • Poorly-designed network application • Performance-limited hardware • CPU, disk I/O subsystem, system buses, memory • Heavily-loaded network end systems • System interrupt loads are too high • Interrupt coalescing, Jumbo Frame • System process load are too high • Poorly configured TCP protocol parameters • TCP Send/Receive buffer size • TCP window scaling in high speed, long distance networks.

  9. 2.3 TCP throughput is network-limited • Two Facts: • TCP sender tries to estimate the available bandwidth in the networks, and represents it as CWND with congestion control algorithms. • TCP assumes packet drops are caused by network congestion. Any packet drops will lead to a reduction in CWND. • Two determining factors for CWND • Congestion control algorithm • Network Conditions (Packet drops)

  10. 2.3 TCP throughput is network-limited (cont) • TCP congestion control algorithm is evolving • Standard TCP congestion control (Reno/NewReno) • Slow start, congestion avoidance, retransmission timeouts, fast retransmit and fast recovery • AIMD scheme for congestion avoidance • Perform well in traditional networks • Cause under-utilized problem in high-speed and long-distance networks • High-speed TCP variants: FAST TCP, HTCP, HSTCP, BIC, and CUBIC • Modify the AMID congestion avoidance scheme of standard TCP to be more aggressive, • Keep the same fast retransmit and fast recovery algorithm • Solve the under-utilized problem in high speed and long distance networks

  11. 2.3 TCP throughput is network-limited (cont) • With high-speed TCP variants, it is mainly the packet drops that lead to a relatively small CWND • The following conditions could lead to packet drops • Network congestion. • Network infrastructure failures. • Network end systems. • Packet drops in Layer 2 queues due to limited queue size. • Packet dropped in ring buffer due to system memory pressure. • Routing changes. • When a route changes, the interaction of routing policies, iBGP, and the MRAI timer may lead to transient disconnectivity. • Packet reordering. • Packet reordering will cause duplicate ACKs to the sender. RFC 2581 suggest a TCP sender should consider three or more dupACKs as an indication of packet loss. With severe packet reordering, TCP might misinterpret it as packet losses.

  12. 2.3 TCP throughput is network-limited (cont) • Congestion window is manipulated on the unit of Maximum Segment Size (MSS). Larger MSS entails higher TCP throughput. • Larger MSS is efficient for both networks and network end systems.

  13. 3. Network Performance Analysis Methodology

  14. Network Performance Analysis Methodology • An end-to-end network/application performance is viewed as • Application-related problems, • Beyond the scope of any standardized problem analysis • Network end system problems • Network path problems • Network performance analysis methodology • Analyze and appropriately tune the network end systems • Network path analysis, with remediation of detected problems where feasible • If network end system and network path analysis do not uncover significant problems or concerns, packet trace analysis will be conducted. • Any performance bottlenecks will manifest themselves in the packet traces.

  15. 3.1 Network Performance Analysis Network Architecture

  16. 3.1 Network Performance Analysis Network Architecture (cont) • Network end system diagnosis server. • We use Network Diagnostic Tool (NDT). • collect various TCP network parameters in the network end systems, and identify their configuration problems • Identify local network infrastructure problems such as faulted Ethernet connections, malfunctioning NICs, and Ethernet duplex mismatch. • Network path diagnosis server • We use OWAMP applications to collect and diagnose one-way network path statistics. • The forward and reverse path might not be symmetric • The forward and reverse path traffic loads likely not symmetric • The forward and reverse path might have different Qos schemes • Other tools such as Ping, traceroute, pathneck, iperf, and PerfSONAR etc could be used.

  17. 3.1 Network Performance Analysis Network Architecture (cont) • Packet trace diagnosis server • Directly connect to the border router, can port-mirror any port in the border router • TCPDump, used to record packet traces • TCPTrace, used to analyze the recorded packet traces • Xplot, used to examine the recorded traces visually

  18. 3.2 Network/Application Performance Analysis Steps • Step 1: Definition of the problem space • Step 2: Collect of network end system information & network path characteristics • Step 3: Network end system diagnosis • Step 4: Network path performance analysis • Route changes frequently? • Network congestion: delay variance large? Bottleneck location? • Infrastructure failures: examine the counter one by one • Packet reordering: load balancing? Parallel processing? • Step 5: Evaluate packet trace pattern

  19. Collection of network end system information

  20. Collection of network path characteristics • Network path characteristics • Round-trip time (ping) • Sequence of routers along the paths (traceroute) • One-way delay, delay variance (owamp) • One-way packet drop rate (owamp) • Packet reordering (owamp) • Current achievable throughput (iperf) • Bandwidth bottleneck location (pathneck)

  21. What happened? Traffic trace from Fermi to OEAW

  22. What happened? Traffic trace from Fermi to Brazil

  23. Conclusion • Fermilab is working on developing a performance analysis methodology • Objective is to put structure into troubleshooting network performance problems • Project is in early stages of development • We welcome collaboration & feedback • Biweekly Wide-Area-Working-Group (WAWG) meeting on alternate Friday mornings • Send email to WAWG@FNAL.GOV

More Related