1 / 4

Ion Motion Through an RFQ Varying the q-value Varying the Buffer Gas Pressure The q-value

Ion Motion Through an RFQ Varying the q-value Varying the Buffer Gas Pressure The q-value We define the q-value for an ion inside an RFQ device to be:. Where: e = the charge on the ion V pp = the peak-to-peak voltage applied to the RFQ m = the mass of the ion

donagh
Download Presentation

Ion Motion Through an RFQ Varying the q-value Varying the Buffer Gas Pressure The q-value

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Ion Motion Through an RFQ • Varying the q-value • Varying the Buffer Gas Pressure • The q-value • We define the q-value for an ion inside an RFQ device to be: • Where: • e = the charge on the ion • Vpp = the peak-to-peak voltage applied to the RFQ • m = the mass of the ion • r0 = the radius of the RFQ • Ω = the angular frequency of the applied RF-field • The q-value governs the stability of the ions paths in the RFQ. In an RFQ the ion motion is stable for q ≤ 0.908. For q-values higher than 0.908 the ion motion is unstable and hence the ions are not trapped.

  2. The Effect of Varying the q-value q=0.1 q=0.3 q=0.5 q=0.7 q=1

  3. Buffer Gas Cooling An ion beam can be cooled via collisions with an inert buffer gas however such collisions cause the beam to diverge. The RFQ provides a force that pushes the ions onto its Z-axis hence an ion beam can be cooled inside an RFQ via collisions with a buffer gas without the beam diverging. By varying the buffer gas pressure one can control the time it takes for cooling to take place.

  4. The Effect of Varying the Buffer Gas Pressure q=0.4_p=1^-2 q=0.4_p=1^-3 q=0.4_p=2.5^-2 q=0.4_p=5^-2 q=0.4_p=5^-3

More Related