1 / 10

DSL-2540T PPPoA Configuration

DSL-2540T PPPoA Configuration. Client Configuration. Set Your System to Get IP From DSL-2540T built-in DHCP Server. Select to Obtain IP automatically from DSL-2540T. Click “OK” to Save. DSL-2540T Log-in Page. Open Web-Browser & key-in http://192.168.1.1 to access Web-Configuration.

eldon
Download Presentation

DSL-2540T PPPoA Configuration

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. DSL-2540T PPPoA Configuration

  2. Client Configuration Set Your System to Get IP From DSL-2540T built-in DHCP Server Select to Obtain IP automatically from DSL-2540T Click “OK” to Save

  3. DSL-2540T Log-in Page Open Web-Browser & key-in http://192.168.1.1 to access Web-Configuration User Name: admin Password: admin

  4. Setup Page To Open Setup Screen CLICK “WAN”

  5. Setup Page  Home  WAN Enter “0” Enter “50” ISP User Name & Password Select PPPoA LLC To Modify CLICK “Apply”

  6. SAVE Changes To Save Changes CLICK “Save and Reboot”

  7. Check the Status  Status  Device Info  1.Check “Not Connected” 2.CLICK “Connect”

  8. Connection Status  Status Log Last Page CLICK “Last Page”

  9. Connection Status  Status Device Info Check “Connected”

  10. Thank You!! Prepared by: Jaime D. Lano Jr RMA Eng’r. D-Link Middle East

More Related