1 / 21

Warm – Up Chapter 3-2

Warm – Up Chapter 3-2. 1. How do particle change from a solid to a liquid? 2. What is the difference between evaporation and boiling? 3. What is sublimation? 4. What state of matter is the most common in the universe?. Chapter 3-2 States of Matter. Fluids. Fluids.

ellenberger
Download Presentation

Warm – Up Chapter 3-2

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Warm – UpChapter 3-2 • 1. How do particle change from a solid to a liquid? • 2. What is the difference between evaporation and boiling? • 3. What is sublimation? • 4. What state of matter is the most common in the universe?

  2. Chapter 3-2States of Matter Fluids

  3. Fluids • Fluid – nonsolid state of matter • Atoms free to move past each other • Gas or liquid

  4. How do ships float? • Buoyant Force– upward force exerted on an object in a fluid

  5. How do ships float? • If buoyant force < object’s weight, the object will sink.

  6. Pressure • Pressure – amount of force exerted per unit area of a surface • Increases as depth increases • Pressure below is greater than pressure above – upward buoyant force

  7. Archimedes’ Principal • Buoyant force on an object in a fluid is an upward force equal to the weight of the volume of a fluid that the object displaces

  8. Density • Density = mass / volume

  9. Pressure Formula • Pressure = force (N) / area (m2) • SI Unit - pascal

  10. Pascal’s Principal • Hydraulic machines to toothpaste • A fluid in a vessel exerts a pressure of equal intensity in all directions.

  11. Pascal’s Principal • P1 = P2 • F1 = F2 A1 = A2 Cross Multiply! Force is measured in Newton’s (N) Area is in cm2

  12. Calculating Pascal’s Principal • A hydraulic lift is used to lift a heavy machine that is pushing down on a 2.8 m2 piston (A1) with a force (F1) of 3,700 N. What force (F2) needs to be exerted on a 0.072 m2 piston (A2) to lift the machine?

  13. Calculating Pascal’s Principle • In a hydraulic system, a force of 7,500 N is exerted on a piston with an area of 10 m2. If the force exerted on a second piston in the hydraulic system is 1,500 N, what is the area of the second piston?

  14. Fluids in Motion • Fluids move faster in smaller areas compared to larger areas • Viscosity – the resistance of a gas or liquid to flow • High – slow • Low – fast

  15. Bernoulli’s Principle • As the velocity of a fluid increases, the pressure exerted by the fluid decreases.

  16. Flying! • Velocity of the air blown over the top surface of the wing is greater than that of the air below it. • Air pressure pushing down on the top of the wing is lower than the air pressure pushing up on the wing. • Net force below the wing pushes the plane upward.

  17. Try it! • Blow on the top of a sheet of paper.

More Related