1 / 23

TRAFF-20 Development

TRAFF-20 Development. Author: Nick Rubbi. Prepared: December 2011. Agenda. Current status of work; Traff-20, VC=6, Revision 1; Changes made since February 2011; Future work;. Current Status. Traff-20 VC6 Rev 1 Test Release – Build 102 (dated 24 th May 2011).

elysia
Download Presentation

TRAFF-20 Development

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. TRAFF-20 Development Author: Nick Rubbi Prepared: December 2011

  2. Agenda • Current status of work; • Traff-20, VC=6, Revision 1; • Changes made since February 2011; • Future work;

  3. Current Status • Traff-20 VC6 Rev 1 Test Release – Build 102(dated 24th May 2011). • Traff-20 test versions supplied to controller manufacturers; • Test version 102 supplied on 24th May 2011; • Targeting Traff VC6 build 1 release; • Failed to meet original target ie first controller in the field to correspond with SCATS release in June 2011;

  4. Current Status of QTC Controller • QTC provided hardware and software for the test controller on 3rd February; • Estimated software delivery at the end of October.

  5. Current Status of Eclipse Controller • Tyco provided hardware updates to the test controller on 9th November; • Estimated software delivery end of January 2012; • Aside Tyco expressed a desire to minimise future changes to PSC software: – affects porting of some VC6 changes;

  6. Current Status of ATSC/4 Controller • ATC have only just started making changes for Traff-20 VC6. • ATC have been concentrating on Type Approval; • Field trial of ATSC/4 version 8.1 scheduled for11th December;

  7. Changes Since Last SMUG Meeting (February 2011) • Release is now targeting Traff Build 1(not 28) • Traff Software description CnnV6.xR20: • nn Controller Id (18 – QTC; 24 – Eclipse; 29 - ATSC/4); • x VC 6 revision x; • R20 Indicates Traff-20;

  8. Changes Since Last SMUG Meeting (February 2011) • Release notes: • TRAFF20-TN-000 Release Notes 3.pdf

  9. Changes Since Last SMUG Meeting (February 2011) • 32 XSF Bits (Operational): • X1TO8 - $00D8 • X9TO16 - $00D9 • New X17TO24 - $0180 • New X25TO32 - $0181 Warning non-contiguous addresses

  10. Changes Since Last SMUG Meeting (February 2011) • 32 XSF Bits (SCATS and Flexilink Plans): • SCATX1 - $0332 • SCATX9 - $0333 • New SCATX17 - $018C • New SCATX25 - $018D • FLEXX1 - $0330 • FLEXX9 - $0331 • New FLEXX17 - $0188 • New FLEXX25 - $0189 Warning non-contiguous addresses

  11. Changes Since Last SMUG Meeting (February 2011) • 32 MSS Bits: • S1TO8 - $00DA • S9TO16 - $00DB • New S17TO24 - $0180 • New S25TO32 - $0181 Warning non-contiguous addresses

  12. Changes Since Last SMUG Meeting (February 2011) • New Fault 67 (SG output map fault):Caused by allocating a SG output morethan once.

  13. Changes Since Last SMUG Meeting (February 2011) • Daily Output separated from Special Facility Outputs (aka SPOPS);- New DAILY - $0F2C

  14. Changes Since Last SMUG Meeting (February 2011) • 24 SPIPS: • EXTINP - $0379 • New EXTINP2 - $0F24 • New EXTINP3 - $0F25 • 24 SPOPS: • EXTOUT - $037A • New EXTOUT2 - $0F28 • New EXTOUT3 - $0F29 Warning non-contiguous addresses

  15. Changes Since Last SMUG Meeting (February 2011) • RAM address $3603 indicates runtime library version(release is targeting 1); • RAM address $3604 indicates hht version(release is targeting 1); • RAM addresses added to allow remote checking of the controller software build switches used;

  16. Changes Since Last SMUG Meeting (February 2011) • RAM addresses added to allow remote monitoring of SCATS communications errors eg rx buffer full; • Corresponding HHT menu updates; • Bug fixes in HHT and previous Test version of Traff; • Refer HHT Manual RTA-TC-301 Draft Issue J May 2011

  17. Changes Since Last SMUG Meeting (February 2011) • Wintraff: • Mostly complete for VC6; • Waiting for final testing before available to release;

  18. Changes Since Last SMUG Meeting (February 2011) • NGEN: • Handover to RMS effective 17th November 2011; • Minor changes required before ready for newTraff VC6 personality; • Will manage both VC6 and VC5 personalities;

  19. Future Changes • More Phases; How many? • New communications protocol;  NTCIP? • Plan based operation; take pressure of comms • Change to time settings and time settings management; needs to be extensible;- Work related to new comms protocol

  20. Future Changes • Plug and play type operation; • Serial communications allowing the Personality to setup and test messages eg RS-485;  System • One mode of operation; • Additional Personality Operators;

  21. Future Changes • Maybe Fill gaps in I/O; TSC/4 Controllers Support: • 96 – 128?? Inputs max. • 48 - 64 Loop Inputs max. • 48 - 64 Switch Inputs max. TSC/4 Specifies: • 64 Inputs max. • 64 Logical Vehicle Detectors max. • 8 Logical PB Inputs max. • 32 Loop Inputs max. • 64 Switch Inputs max. (with 8 PB Inputs max.)

  22. Feedback • No Feedback received from SMUG members from last meeting; • Feedback is encouraged to help in determining work priorities;

More Related