1 / 12

Chapter 2 D iscrete Fourier Transform (DFT)

Chapter 2 D iscrete Fourier Transform (DFT). Topics: Discrete Fourier Transform. Using the DFT to Compute the Continuous Fourier Transform. Comparing DFT and CFT Using the DFT to Compute the Fourier Series. Huseyin Bilgekul Eeng360 Communication Systems I

ericssmith
Download Presentation

Chapter 2 D iscrete Fourier Transform (DFT)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Chapter 2 Discrete Fourier Transform (DFT) Topics: • Discrete Fourier Transform. • Using the DFT to Compute the Continuous Fourier Transform. • Comparing DFT and CFT • Using the DFT to Compute the Fourier Series Huseyin Bilgekul Eeng360 Communication Systems I Department of Electrical and Electronic Engineering Eastern Mediterranean University

  2. Where n = 0, 1, 2, …., N-1 where k = 0, 1, 2, …., N-1. Discrete Fourier Transform (DFT) • Definition: The Discrete Fourier Transform (DFT)is defined by: The Inverse Discrete Fourier Transform (IDFT) is defined by: The Fast Fourier Transform (FFT) is a fast algorithm for evaluating the DFT.

  3. Using the DFT to Compute the Continuous Fourier Transform • Suppose the CFT of a waveform w(t) is to be evaluated using DFT. • The time waveform is first windowed (truncated) over the interval (0, T) so that only a finite number of samples, N, are needed. The windowed waveform ww(t) is • The Fourier transform of the windowed waveform is • Now we approximate the CFT by using a finite series to represent the integral, ∆t = T/N , t = k∆t, f = n/T, dt = ∆t

  4. f = n/T and ∆t = T/N Computing CFT Using DFT • We obtain the relation between the CFT and DFT; that is, • The sample values used in the DFT computation are x(k) = w(k∆t), • If the spectrum is desired for negative frequencies – the computer returns X(n) for the positive n values of 0,1, …, N-1 – It must be modified to give spectral values over the entire fundamental range of -fs/2 < f <fs/2. For positive frequencies we use For Negative Frequencies

  5. Comparisonof DFT and the Continuous Fourier Transform (CFT) Relationship between the DFT and the CFT involves three concepts: • Windowing, • Sampling, • Periodic sample generation

  6. Comparisonof DFT and the Continuous Fourier Transform (CFT) Relationship between the DFT and the CFT involves three concepts: • Windowing, • Sampling, • Periodic sample generation

  7. The Discrete Fourier Transform (DFT) may also be used to compute the complex Fourier series. • Fourier series coefficients are related to DFT by, Using the DFT to Compute the Fourier Series • Block diagram depicts the sequence of operations involved in approximating the FT with the DTFs.

  8. Ex. 2.17 Use DFT to compute the spectrum of a Sinusoid

  9. Ex. 2.17 Use DFT to compute the spectrum of a Sinusoid Spectrum of a sinusoid obtained by using the MATLAB DFT.

  10. Using the DFT to Compute the Fourier Series The DTFT and length-N DTFS of a 32-point cosine. The dashed line denotes the CFT. While the stems represent N|X[k]|. (a) N = 32 (b) N = 60 (c) N = 120.

  11. Using the DFT to Compute the Fourier Series The DTFS approximation to the FT of x(t) = cos(2(0.4)t) + cos(2(0.45)t). The stems denote |Y[k]|, while the solid lines denote CFT. (a) M = 40. (b) M = 2000. (c) Behavior in the vicinity of the sinusoidal frequencies for M = 2000. (d) Behavior in the vicinity of the sinusoidal frequencies for M = 2010

More Related