Tips to Improve MIG Welder Performance

1. Tips to Improve MIG Welder Performance Visit us:- https://www.everlastwelders.ca/

2. Always go with the best MIG welder • Never underestimate the potential of the best welding equipment. Keep one thing in mind that the quality performance of the MIG welder always matters when wants to get the precise welding output, However, MIG welding when done with inefficient equipment and that too without experience, the whole welding process can be hazardous. • Electric shock, fumes and gases, arc rays, noise, and a host of other possible hazards come along with it. The worse is the ultraviolet rays and infrared light rays release from the MIG welding can burn your skin. • This is why always be sure you have the best MIG welder and other related equipment to avoid the possibility of any unfortunate events in the workstation. Visit us:- https://www.everlastwelders.ca/

3. Check the wiring connections properly • Before you start MIG welding, make sure all of your electrical connections are tight- from the front of the MIG welder gun to the power pin and the power source. • One slightly loose connection can cost a fortune. Also, be sure that there is no spatter building up on your welding consumables and there’s a ground cable close to the workplace to hook it on the weldment. Visit us:- https://www.everlastwelders.ca/

4. Keep travel speeds high • High travel speed along with a small bead during welding always helps in minimizing burn-through, warpage, and distortion of sheet metal. • Whereas, slower travel speed means dwelling longer in an area, causing excessive heat to build up around the equipment. Therefore, MIG welders always need to use stringer beads with faster travel speed to maintain a good bead profile. Visit us:- https://www.everlastwelders.ca/

5. Use the accurate contact tip recess for the application • Contact tips, in general, have a significant impact on the MIG welder performance simply because this consumable is responsible for transferring the welding current to the wire as it passes through the bore for creating the precise arc. • And the ideal contact tip can help to reduce the excessive spatter, porosity, as well as or warping of thinner welding materials. Visit us:- https://www.everlastwelders.ca/

6. Get your equipment set-up right • The major portion of the MIG set up is about matching the correct electrode wire diameter to the electrical current (amperage). And, the amperage of the current will only be determined by the thickness of the material (application) you weld. • Make sure that the torch you are using must have a suitable duty cycle and power capacity to handle the welding process. Visit us:- https://www.everlastwelders.ca/

7. Maintain cleanliness of the welding surface • If there is any other successful mantra for MIG welder then it will surely be maintaining the cleanliness of the welding surface. Keep in mind that the major reason behind the failure of MIG weld is due to porosity, i.e. welding dirty, oily, painted surface. • If you want to avoid porous welds that ruin the MIG weld, waste time, and cost money, make sure that the welding surface must be properly cleaned and free from paint, rust, and other contaminants. Visit us:- https://www.everlastwelders.ca/

8. Contact Us •   Address: 35 Milburn Rd, Hamilton, ON L8E 3A3 •   Mail us: sales@everlastwelders.ca •   Phone: 905-570-1818