NetApp NS0-176 Practice Test Questions

1. NS0-176 Free Questions NS0-176 Free Questions Cisco and NetApp FlexPod Implementation Cisco and NetApp FlexPod Implementation and Administration and Administration https://www.passquestion.com/ https://www.passquestion.com/NS0-176 NS0-176.html .html

2. Question 1 Question 1 For a ‘boot from SAN’ configuration, which two features must be enabled? (Choose For a ‘boot from SAN’ configuration, which two features must be enabled? (Choose two) two) A. FCOE A. FCOE B. UDLD B. UDLD C. NPIV C. NPIV D. FC D. FC E. FCSP E. FCSP F. VPC F. VPC Answer: AC Answer: AC

3. Question 2 Question 2 A disaster occurred and both Cisco UCS Fabric Interconnects must be replaced. You A disaster occurred and both Cisco UCS Fabric Interconnects must be replaced. You must restore the system from a "full state" backup. must restore the system from a "full state" backup. Which two steps will accomplish this task? (Choose two.) Which two steps will accomplish this task? (Choose two.) A. Remove the current firmware from the new Fabric Interconnects. A. Remove the current firmware from the new Fabric Interconnects. B. Restore the "full state" backup through the primary Fabric Interconnect's initial system B. Restore the "full state" backup through the primary Fabric Interconnect's initial system setup wizard. setup wizard. C. Restore the "full state" backup using the UCS Manager "import configuration" wizard. C. Restore the "full state" backup using the UCS Manager "import configuration" wizard. D. Upgrade the new Fabric Interconnects to the same version of firmware as the previous D. Upgrade the new Fabric Interconnects to the same version of firmware as the previous Fabric Interconnects. Fabric Interconnects. Answer: CD Answer: CD

4. Question 3 Question 3 Which is a valid connectivity option for a FlexPod? Which is a valid connectivity option for a FlexPod? Note some of these may also be 'valid' options outside of a FlexPod architecture but do not Note some of these may also be 'valid' options outside of a FlexPod architecture but do not specifically meet FlexPod scalability and availability requirements. specifically meet FlexPod scalability and availability requirements. A. UCS B-Series > 2232PP FEX > UCS FI > Nexus 5548 < FAS A. UCS B-Series > 2232PP FEX > UCS FI > Nexus 5548 < FAS B. UCS C-Series > 2232PP FEX > UCS FI > Nexus 5548 < FAS B. UCS C-Series > 2232PP FEX > UCS FI > Nexus 5548 < FAS C. UCS B-Series direct attach FAS C. UCS B-Series direct attach FAS D. UCS C-Series > Nexus 3048 < FAS D. UCS C-Series > Nexus 3048 < FAS E. UCS C-Series direct attach FAS E. UCS C-Series direct attach FAS F. UCS B-series > UCS FI > 2232PP FEX > Nexus 5548 < FAS F. UCS B-series > UCS FI > 2232PP FEX > Nexus 5548 < FAS G. UCS B-Series > UCS FI > Catalyst 3750 < FAS G. UCS B-Series > UCS FI > Catalyst 3750 < FAS Answer: BD Answer: BD

5. Question 4 Question 4 Which sends support summary information to NetApp through HTTPS? Which sends support summary information to NetApp through HTTPS? A. AutoSupport A. AutoSupport B. FlexSupport B. FlexSupport C. SnapSupport C. SnapSupport D. TechSupport D. TechSupport Answer: A Answer: A

6. Question 5 Question 5 What management solution can provision all three components of a FlexPod (NetApp storage, Cisco What management solution can provision all three components of a FlexPod (NetApp storage, Cisco UCS compute and Cisco Nexus network)? UCS compute and Cisco Nexus network)? A. Cisco UCS Central A. Cisco UCS Central B. Cisco FlexPod Manager B. Cisco FlexPod Manager C. NetApp OnCommand Insight C. NetApp OnCommand Insight D. Cisco UCS Director D. Cisco UCS Director E. NetApp FlexPod Manager E. NetApp FlexPod Manager Answer: D Answer: D

7. Question 6 Question 6 Which management tool is used to configure and monitor centralized policies for multiple Cisco UCS Which management tool is used to configure and monitor centralized policies for multiple Cisco UCS domains? domains? A. UCS Manager A. UCS Manager B. UCS Director B. UCS Director C. UCS Central C. UCS Central D. UCS Performance Manager D. UCS Performance Manager Answer: C Answer: C

8. Question 7 Question 7 An administrator is configuring a Flexpod Datacenter solution. The UCS service profiles will use An administrator is configuring a Flexpod Datacenter solution. The UCS service profiles will use FCoE connectivity to the NetApp cluster. FCoE connectivity to the NetApp cluster. Which pool is needed to configure the vHBA templates? Which pool is needed to configure the vHBA templates? A. WWPN pool A. WWPN pool B. MAC pool B. MAC pool C. IQN pool C. IQN pool D. WWNN pool D. WWNN pool Answer: A Answer: A

9. Question 8 Question 8 When connecting the Nexus 1110-X to the Nexus switch, what Spanning Tree port type is used? When connecting the Nexus 1110-X to the Nexus switch, what Spanning Tree port type is used? A. Edge A. Edge B. Trunk B. Trunk C. Network C. Network D. Edge trunk D. Edge trunk E. Normal E. Normal Answer: D Answer: D

10. Question 9 Question 9 Which two are required for single-wire management for Cisco UCS C-Series? (Choose two) Which two are required for single-wire management for Cisco UCS C-Series? (Choose two) A. UCS Manager 2.1 or higher A. UCS Manager 2.1 or higher B. VIC 1240 B. VIC 1240 C. Redundant Nexus 2232PP FEX C. Redundant Nexus 2232PP FEX D. 10 GB LOM D. 10 GB LOM E. FI 6200 family only E. FI 6200 family only F. VIC 1225 F. VIC 1225 Answer: AF Answer: AF

11. Question 10 Question 10 When using Clustered Data ONTAP 8.1 and later, what is the default for new aggregates? When using Clustered Data ONTAP 8.1 and later, what is the default for new aggregates? A. 32-bit aggregates A. 32-bit aggregates B. 64-bit aggregates B. 64-bit aggregates C. 128-bit aggregates C. 128-bit aggregates D. cluster aggregates D. cluster aggregates E. traditional aggregates E. traditional aggregates F. Vserver aggregates F. Vserver aggregates Answer: B Answer: B