1 / 23

Natural Sand Replacement in Concrete Presented by: Martins Pilegis & Andi Lusty 21 st September CMIC 2012, Melbour

Natural Sand Replacement in Concrete Presented by: Martins Pilegis & Andi Lusty 21 st September CMIC 2012, Melbourne, Australia. The V7 Technology. Unique Crushing System. There is an autogenous crushing within the particle cloud and on the rock bed for both, the Barmac and V7 Crushers.

eydie
Download Presentation

Natural Sand Replacement in Concrete Presented by: Martins Pilegis & Andi Lusty 21 st September CMIC 2012, Melbour

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Natural Sand Replacement in ConcretePresented by: Martins Pilegis & Andi Lusty21st September CMIC 2012, Melbourne, Australia

  2. The V7 Technology

  3. Unique Crushing System There is an autogenous crushing within the particle cloud and on the rock bed for both, the Barmac and V7 Crushers. The V7 Crusher is constructed so there are multiple impacts in the new dense material zone. As the material drops down from the stone wall into an increasingly dense zone, it is re-crushed by particle interaction as well as hammers, being both shaped and scrubbed.

  4. Unique Shaping to 75μm Shape of particles <1mm vital • Workability • Pumpability • Density Cone Crusher Barmac VSI V7 Crusher

  5. Dust collector VSI Wind power View showing dispersion system Diffusion feeder Blower Grainsizedamper Cut screen Over size (Return to VSI) Product Inner structure of air screen A Unique Separation System • Air screen gives partial return, top-size cut and classification. • Raw material flows from VSI → diffusion feeder → air screen separation using the blower. • (5) is fully returned, and (4) is partially returned by the damper. • Top size (1) - (3) and part of (4) screened for oversize return.

  6. Unique Flexibility in Gradation A poorly graded crusher dust becomes even poorer after the removal of filler by washing or dedusting. Kayasand is evenly graded and gradations can be changed to make the ideal sand as a single fine aggregate component for concrete or asphalt.

  7. Summary of Differences • The V7 has a more efficient crusher than other autogenous VSI’s • The V7 has an airscreen with the ability to recirculate a variable size of product • The V7 can vary the gradation of the sand • The V7 can control the minus 75 micron content of the sand • The V7 produces a shaped particle size to 75 micron particles • The V7 operates dry as well as quietly and dust free CanV7 Kayasand can COMPLETELYreplace natural sand in concrete?

  8. Cardiff University Research

  9. Key Objectives • Primary aim to show that a manufactured sand can be made to replace natural sand and sand blends • Secondary aim to refine gradations to reduce cement usage and to find new uses for rock filler in agriculture Environmental Benefit • If replacement is proven viable then dredging for sand can be reduced or eliminated, and viable concrete sands can be made in most quarries.

  10. Manufactured sands Manufactured sands from crusher dusts with at least 4 gradings for each quarry • Basalt (B) – Duntilland Quarry, Holcim • Granite (G) – Glensanda Quarry, Holcim • Sandstone (S) – Gilfach Quarry, CEMEX • Limestone (L) – Taff’s Well Quarry, CEMEX Basalt Granite Sandstone Limestone Materials: CEM I 52.5 N, Crushed limestone 4/20 mm, Sea dredged natural sand control (N), Mid range plasticizer WRDA 90, manufactured sands

  11. Characterisation tests New Zealand Flow Cone (NZS 3111-1986) • Observations from mixing • (finishability, ease of placement) Plastic Density • Particle size distribution (BS EN 933-1) • Slump • Water absorption (BS EN 1097-6) Fresh Concrete • Air Entrainment Fine Aggregate Hardened Concrete Methylene Blue Value (BS EN 933-9) • Flexural strength • 28 days GMBV (Grace Rapid Clay test) • Compressive strength • 1 day • 7 days • 28 days Sand Equivalent (BS EN 933-8 )

  12. Manufactured sand test results • New Zealand flow cone – simple indirect test indicating shape, grading and surface texture • All manufactured sands fit within the standard envelope • Methylene blue test – indication of potential presence of clays, Grace’s rapid clay test directly correlated with these results • MBV reduced in all manufactured sands if compared to feed material 0/4 mm fraction

  13. Concrete, Stage 1 • Stage 1: without plasticizer, aiming for S2 slump, fixed w/c ratio for particular quarry sands which provides S2 slump.

  14. Concrete, Stage 2 • Stage 2: Varying plasticizer dosage to achieve S2 slump, fixed w/c ratio at 0.55 for all sands.

  15. Primary Objective • to show that a manufactured sand can be made to replace natural sand and sand blends in concrete MET V7 sand can COMPLETELYreplace natural sands in concrete!

  16. The Economics

  17. V7-60 Economics (60 tph throughput) • Operating Costs • Power = 6.7kwhr per tonne throughput • @ 15c/kwhr = Aus $1.00 • Wear parts and maint = $1.85 to $2.80 depending on material • Capital Costs • Typical ~ Aus $3m turnkey installation • 60tph capacity = 200ktpa+ • 10 yr amortisation Typical Opex ~ $3.20 /t throughput Typical capital rec ~ $1.50 /t throughput

  18. V7-60 Economics (60 tph throughput) • Sand Yields • Range = 75% to 85% • Typical = 80% • Depends on feed • - Crushing properties • - Filler content • Filler (dry premium product) • 15% to 30% • - Granulate – drainage = $15/t • - Road base = $20/t • - Asphalt/block plants = $20/t • - Agriculture = $20/t Significant upside likely from filler Premium all in fine aggregate ~ $5.80/t (Assuming filler has no value and full capital recovery)

  19. The economics compared 1 Costs will vary depending on location and feed, these costs are typical of installations Kayasand has completed detailed evaluations for. 2 Allowance for resource consent, dredger, wharf facilities. 3 Will vary depending on the distance off shore for dredging. 4 Allowance for resource consents and capital investment – wash-plant , filter press etc. 5 Wash plant operating costs vary depending on water, waste costs, efficiency etc.

  20. The Environment

  21. The Japanese Experience • Japan banned unnecessary dredging in 1991 • Kayasand now accounts for 45% of all of their manufactured sand • While the introduction of Kayasand has been successfully implemented and the environment as well as the construction industry has benefited, regulatory change was necessary

  22. Driving Change for Environmental Gain • There is often resistance to change in any industry due to: • Vested interests (from existing sand, gravel and dredging companies) • Economic pressures and lack of priority (bigger problems so park this) • Relativelyslowadopters of proven but novel technology • The environmental cost is not borne by them

  23. Acknowledgements Kayasand would like to acknowledge the financial and in kind support of: The Aggregate Levy Fund for Wales Kotobuki Engineering & Manufacturing Company (Kemco) CEMEX Aggregate Industries (Holcim) Grace Construction Products and Cardiff University’s Engineering Department for their input and supervision, in particular Diane Gardner and Professor Bob Lark

More Related