1 / 16

EE354 : Communications System I

EE354 : Communications System I. Lecture 25,26,27: Digital communication Aliazam Abbasfar. Outline. Digital communication Baseband systems Optimum receiver. Digital communication. Transfer of digital messages from source to destination reliably Sometimes called signaling

faxon
Download Presentation

EE354 : Communications System I

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. EE354 : Communications System I Lecture 25,26,27: Digital communication Aliazam Abbasfar

  2. Outline • Digital communication • Baseband systems • Optimum receiver

  3. Digital communication • Transfer of digital messages from source to destination reliably • Sometimes called signaling • Digital message • Sequence of symbols (digits) • Symbols are chosen from an alphabet (M symbols) • Binary symbols : bits : alphabet {0,1} • Data rate • Symbol/Baud/Signaling rate (symbols per second) (r) • bit rate (bits per second) (rb) • Reliability is measured by probability of error • Symbol/Bit error rate (BER) • Packet error rate (PER) • BER targets • Voice : 10-5 • Data : 10-6 • Video : 10-7

  4. Channel decoder Demod Channel encoder Mod Digital systems message • Digital source • Digitized voice/images • Data • Source encoder and decoder • Data compression • Encryption • Channel encoder and decoder • Error detection/correction • Example : repetition code • Modulation/demodulation • Digital • Baseband/bandpass y(t) x(t) Source decoder Digital Source Source encoder Channel

  5. Pulse Amplitude Modulation (PAM) • A sequence of pulses with varying amplitudes • y(t) = Sak p(t- kT) + n(t) • T : symbol time • Inter-symbol interference (ISI) • y(kT) = ak p(0) + S am p(mT) + n(kT) • p(0) = 1; p(mT) = 0; for all m<>0 • Rectangular pulse • Sinc pulse • Symbols are mapped into pulse amplitudes (ak) • M-PAM has M levels  unipolar 2-PAM levels: {0, A} • Alphabet {0,1}  bipolar 2-PAM levels: {-A, A} • Alphabet {0,1}  bipolar 2-PAM levels: {-A, A} • Alphabet {0,1,2}  bipolar 3-PAM levels: {-A, 0, A} • Alphabet {0,1,2,3}  bipolar 4-PAM levels: {-3A, -A, A, 3A} • Data rate • Symbol rate : r= 1/T • Bit rate : rb = log2(M)/T • Example: binary signaling with rectangular pulse • Bipolar 2-PAM • RZ and NRZ y(t) T

  6. Performance with noise • AWGN with power s2 • E[n2(t)] = s2 • Sampled signal distribution • No ISI and p(0)=1 • z = y(kT) = ak + n(kT) • Symbol detection • Compare with thresholds • Slicer or A/D • Probability of error • Pe = S PiPe|i • Pe|i : probability of error for ith symbol • Unipolar binary : Pe = Q(A/2s) • Bipolar binary : Pe = Q(A/s) • Bipolar M-PAM : Pe = 2(1-1/M) Q(A/s) = 2(1-1/M) Q(Amax/(M-1)s)

  7. Analog vs Digital repeater • Digital (regenerative) repeater detects the symbols and regenerate them again • Pem = 1-(1-Pe)m m Pe • Accumulate errors • Analog repeater amplifies signal + noise • Accumulate noise • sm2 = m s2 • Pem = 2(1-1/M) Q(A/sm) • Hybrid repeater : A digital repeater after every m analog repeater • Pemxk = k Pem

  8. Pulse detector • x(t) = {0 or p(t)} + n(t) • p(t) is time-limited pulse • p(t) = 0; t<0 or t> T • AWGN with power spectral density of N0/2 • Rn(t) = N0/2 d(t) • Gn(f) = N0/2 • Filter x(t) with H(f) and sample at time T • Signal amplitude : • Noise power : • Maximize A/2s • Matched filter • H(f) = P(f)* e-j2pfT • h(t) = p(T-t) • Amax = Ep • s2 = EpN0/2 • Probability of error

  9. Correlator • Matched filter output is the correlation of the signal and the pulse • Detecting one out of two different pulses • y(t) = {p0(t) or p1(t)} + n(t) • y(t)-p0(t) = {0 or p1(t)-p0(t)} + n(t) • Correlate y(t) with p1(t)-p0(t) • Decision level : corr( [p1(t)+p0(t)]/2, p(t) ) • Error probability • Correlator receiver • Correlate y(t) with all pi(t) • Detected symbol based on the output of the correlators • If we have a series of pulses, each pulse is detected by correlation • y(t) = Sak p(t- kT) + n(t) • Correlate y(t) with p(t-kT)  ak

  10. ISI free matched filtering • ISI free : Matched filter output due to other pulses = 0 • Shifted versions of the pulse are orthogonal • combT(Rp(t))= Epd(t)  rep1/T(|P(f)|2) = Cte • Folded spectrum is flat • Band-limited pulses • Sinc pulse • Root raised cosine

  11. Power spectrum • x(t) = Sak p(t- kT) = [Sakd(t- kT)]  p(t) • Gx(f) = Ga(f) |P(f)|2 • Bipolar PAM : • Ga(f) = E[ak2]/T • Gx(f) = E[ak2]/T |P(f)|2 • Px = E[ak2] Ep/T = Es/T

  12. Bandpass modulations • Amplitude shift keying (ASK) • x(t) = Sak p(t- kT) • p(t) = cos(wct) • ak = 0 or A • Coherent detection • Down convert  unipolar 2-PAM • Envelope detector • Similar to AM (a strong carrier)

  13. PSK • Phase shift keying (PSK) • x(t) = S p(t- kT) • p(t) = cos(wct + Fk) • BPSK • Modulated bipolar 2-PAM • x(t) = Sak p(t- kT) • ak = -A or A • p(t) = cos(wct) • QPSK • x(t) = Sak p1(t- kT) + bk p2(t- kT) • ak = -A or A • p1(t) = cos(wct) • p2(t) = sin(wct)

  14. QAM • Quadrature amplitude modulation(QAM) • Amplitude and phase modulations • x(t) = Sak p1(t- kT) + bk p2(t- kT) • p1(t) = cos(wct) • p2(t) = sin(wct) • 2 independent PAM

  15. FSK • Frequency shift keying (FSK) • Two different frequencies fc1 and fc2 • x(t) = {A cos(wc1t) or A cos(wc2t)} • Coherent detection • Ep1-p2 = 2K Eb • K=1 when orthogonal pulses • Non-coherent detection • Use frequency detectors

  16. Reading • Carlson Ch. 11.1, 11.2, 11.3

More Related