1 / 10

Investigation of triggering mechanisms for internal transport barriers in Alcator C-Mod

Investigation of triggering mechanisms for internal transport barriers in Alcator C-Mod. K. Zhurovich C. Fiore, D. Ernst, P. Bonoli, M. Greenwald, A. Hubbard, D. Mikkelsen * , E. Marmar, J. Rice MIT Plasma Science and Fusion Center * Princeton Plasma Physics Laboratory APS DPP Meeting

finnea
Download Presentation

Investigation of triggering mechanisms for internal transport barriers in Alcator C-Mod

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Investigation of triggering mechanisms for internal transport barriers in Alcator C-Mod K. Zhurovich C. Fiore, D. Ernst, P. Bonoli, M. Greenwald, A. Hubbard, D. Mikkelsen*, E. Marmar, J. Rice MIT Plasma Science and Fusion Center *Princeton Plasma Physics Laboratory APS DPP Meeting Philadelphia, PA October 31, 2006

  2. Motivation Inward pinch Core Edge Outward diffusion Background: • Internal transport barriers (ITBs) can be routinely produced in C-Mod steady enhanced Dα (EDA) H-mode plasmas by applying ICRF at |r/a| ≥ 0.5 (off-axis heating) • They are observed primarily in the electron particle channel and are marked by the steepening of the density and pressure profiles following the L-H transition Framework: • During normal plasma operation inward neoclassical Ware pinch is balanced by the outward diffusion caused by the microturbulent modes, resulting in a flat density profile

  3. Motivation Background: • Internal transport barriers (ITBs) can be routinely produced in C-Mod steady enhanced Dα (EDA) H-mode plasmas by applying ICRF at |r/a| ≥ 0.5 (off-axis heating). • They are observed primarily in the electron particle channel and are marked by the steepening of the density and pressure profiles following the L-H transition. Framework: • During normal plasma operation inward neoclassical Ware pinch is balanced by the outward diffusion caused by the microturbulent modes, resulting in a flat density profile Inward pinch Core Edge Outward diffusion • Suppressing turbulent diffusion allows the pinch to overcome, resulting in a peaked density profile • Longer modes (ITG) are responsible for transport • Shifting the ICRF resonance outward flattens the temperature profile and decreases the mode’s drive

  4. Plasma parameters (ITB vs. non-ITB) 6.3 T ITB line-integrated density (1020 m-2) line-integrated density (1020 m-2) density peaking = density peaking RF power (MW) RF power (MW) time (s) time (s) 5.6 T non-ITB • Magnetic field scan: shift the RF resonance location on shot-to-shot basis • Plasma current adjusted proportionally to keep q95 constant • Sharp threshold in BT consistent with previous observations

  5. Pre-ITB electron temperature gradient Near ITB foot location Just inside ITB foot ITB non-ITB • Temperature scale length is calculated from ECE measurements • Averaging has been done over steady portions of the discharges (pre-ITB phase for ITB discharges) • R/LT decreases as the ICRF resonance position is moved outward by raising the magnetic field • This decrease is observed just inside the ITB foot location for ITB discharges

  6. Change in electron temperature gradient 70 MHz on-axis 80 MHz off-axis R=0.78m Te (keV) ITB foot R=0.83m time (s) time (s) Te (keV) R/LT time (s) R (m) • Dual frequency ICRF setup • ITB develops during the off-axis heating phase • Temperature measurements are done by high resolution (32 channels) ECE system • Temperature scale length is derived from channels around the ITB location • Profiles are shown at times corresponding to 100% on-axis heating, 50%-50% on- and off-axis, and 100% off-axis heating • R/LT decreases in the region of ITB as the ICRF resonance moves off axis

  7. Ion temperature profile measurements ITB non-ITB ITB • Ion temperature is measured by high resolution x-ray system (HIREX) • Central ion temperature is derived from neutron rate measurements • Ion temperature profile gets flatter as ICRF resonance is moved off axis

  8. Ion temperature profile (TRANSP simulation) Te Ti RF (x10) (Watts/cm3) Te Ti RF (x10) (Watts/cm3) Te Ti RF (x10) (Watts/cm3) Te Ti RF (x10) (Watts/cm3) • Ti is calculated by TRANSP to match the neutron rate (using feedback corrected multiplier on χneo to obtain χi) • Ion temperature profile gets broader as ICRF resonance is move outward • This trend is consistent with experimental observations ITB

  9. ITG growth rate profiles non-ITB ITB • ITG/ETG growth rate profiles are calculated by linear gyrokinetic stability code GS2 based on TRANSP analysis • No difference in ETG growth rates and spectra for ITB vs. non-ITB cases • The region of stability for ITG modes gets wider as ICRF resonance is moved outward • kρi spectra are similar for all runs and peak at ~0.3-0.4

  10. Conclusions • Experimental evidence: electron and ion temperature profiles get flatter as ICRF resonance location is shifted off-axis • Ti profiles as calculated by TRANSP exhibit similar trend with the absolute deviation from the electron temperature being small • Using TRANSP Ti profiles linear GS2 calculations show that region of stability to ITG modes gets wider as ICRF resonance is move outward • Suppressing ITG turbulence can be a dominant factor in the triggering mechanisms for off-axis ICRF heated ITBs in C-Mod

More Related